Iron and aluminium based adsorption strategies for removing arsenic from water

Arsenic is a commonly occurring toxic metal in natural systems and is the root cause of many diseases and disorders. Occurrence of arsenic contaminated water is reported from several countries all over the world. A great deal of research over recent decades has been motivated by the requirement to lower the concentration of arsenic in drinking water and the need to develop low cost techniques which can be widely applied for arsenic removal from contaminated water. This review briefly presents iron and aluminium based adsorbents for arsenic removal. Studies carried out on oxidation of arsenic(III) to arsenic(V) employing various oxidising agents to facilitate arsenic removal are briefly mentioned. Effects of competing ions, As:Fe ratios, arsenic(V) vs. arsenic(III) removal using ferrihydrite as the adsorbent have been discussed. Recent efforts made for investigating arsenic adsorption on iron hydroxides/oxyhydroxides/oxides such as granular ferric hydroxide, goethite, akaganeite, magnetite and haematite have been reviewed. The adsorption behaviours of activated alumina, gibbsite, bauxite, activated bauxite, layered double hydroxides are discussed. Point-of-use adsorptive remediation methods indicate that Sono Arsenic filter and Kanchan™ Arsenic filter are in operation at various locations of Bangladesh and Nepal. The relative merits and demerits of such filters have been discussed. Evaluation of kits used for at-site arsenic estimation by various researchers also forms a part of this review.     

Characterization of two metal resistant Bacillus strains isolated from slag disposal site at Burnpur, India

Two strains of Bacillus sp. resistant to arsenate and lead designated as AsSP9 and PbSP6, respectively were isolated from the slag disposal site. They were identified to be related to Bacillus cereus cluster on the basis of 16S rDNA based sequence analysis and phenotypic characteristics. Both were rod-shaped (AsSP9, 2-5 microm and PbSP6, 2-4 microm), aerobic, salt tolerant (2-8% NaCI), endospore forming bacteria with minor differences like the AsSP9 showed sporangial bulging and PbSP6 had positive lipase activity. The temperature range for their growth was 20-40 degrees C and pH range 6.0-9.0 with an optimum temperature of 37 degrees C and pH of 7 for both strains. The principal nitrogen sources forAsSP9 and PbSP6 were DL-Tryptophan and L-Phenylalanine, respectively. The suitable carbon source forAsSP9 was lactose and for PbSP6 sucrose. The heavy metal accumulation efficiency was found to be 0.0047 mg g(-1) of dry mass forAsSP9 and 0.686 mg g(-1) of dry mass for PbSP6.     

Unravelling the photoprotective effects of freshwater alga Nostoc commune Vaucher ex Bornet et Flahault against ultraviolet radiations

Environmental Science and Pollution Research - Several studies have suggested the direct relationship between skin complications, air pollution, and UV irradiation. UVB radiations cause various...     

Recent Advancement of Biopolymers and Their Potential Biomedical Applications

Journal of Polymers and the Environment - Recently, the advantages of biopolymers over conventional plastic polymers are unprecedented, provided that they are used in situations in which they raise...     

Clays and modified clays in remediating environmental pollutants

Environmental Science and Pollution Research -     

Coastal vulnerability assessment of the predicted sea level rise in the coastal zone of Krishna–Godavari delta region,Andhra Pradesh,east coast of India

The Krishna–Godavari coastal region in east coast of India has a 525.15-km-long coastline with low-lying tidal mudflats, beaches, mangrove swamp, creek and tidal channels. Recently, the increasing frequency of tropical cyclones in the Bay of Bengal, i.e., Phylin and Hudhud in Andhra Pradesh coast, and the devastating impact of the 2004 tsunami in India increased the significance in assessing the vulnerability of the coastal lands to inundation and flooding, notably in the context of climate change-induced sea level rise. This study aims to estimate a coastal vulnerability index (CVI) for the coastal subregion of Krishna–Godavari delta and to use the calculated index to evaluate the vulnerability of 14 coastal talukas of the Krishna–Godavari delta region. This CVI is calculated by using four geological and three physical parameters characterizing the vulnerability of the study coastal region, including regional slope, coastal elevation, geomorphology, significant wave height, mean tidal range and relative sea level using different conventional and remotely sensed data. Using a composite coastal vulnerability index based on the relative risk rating of those parameters, each of the 14 coastal talukas was classified according to their vulnerability. The CVI results depict that coasts are least and most vulnerable to inundation, flooding and erosion of coastal lands where geological parameters are more efficient to CVI. The paper alerts to decision makers and planners to mitigate the natural disaster and manage the coastal zone and is a primary step toward prioritizing coastal lands for climate change adaptation strategies in the view of increased storminess and projected sea level rise.     

Chemical speciation of PM emissions from heavy-duty diesel vehicles equipped with diesel particulate filter (DPF) and selective catalytic reduction (SCR) retrofits

Four heavy-duty diesel vehicles (HDDVs) in six retrofitted configurations (CRT^®, V-SCRT^®, Z-SCRT^®, Horizon, DPX and CCRT^®) and a baseline vehicle operating without after--treatment were tested under cruise (50 mph), transient UDDS and idle driving modes. As a continuation of the work by Biswas et al. [Biswas, S., Hu, S., Verma, V., Herner, J., Robertson, W.J., Ayala, A., Sioutas, C., 2008. Physical properties of particulate matter (PM) from late model heavy-duty diesel vehicles operating with advanced emission control technologies. Atmospheric Environment 42, 5622–5634.] on particle physical parameters, this paper focuses on PM chemical characteristics (Total carbon [TC], Elemental carbon [EC], Organic Carbon [OC], ions and water-soluble organic carbon [WSOC]) for cruise and UDDS cycles only. Size-resolved PM collected by MOUDI–Nano-MOUDI was analyzed for TC, EC and OC and ions (such as sulfate, nitrate, ammonium, potassium, sodium and phosphate), while Teflon coated glass fiber filters from a high volume sampler were extracted to determine WSOC. The introduction of retrofits reduced PM mass emissions over 90% in cruise and 95% in UDDS. Similarly, significant reductions in the emission of major chemical constituents (TC, OC and EC) were achieved. Sulfate dominated PM composition in vehicle configurations (V-SCRT^®-UDDS, Z-SCRT^®-Cruise, CRT^® and DPX) with considerable nucleation mode and TC was predominant for configurations with less (Z-SCRT^®-UDDS) or insignificant (CCRT^®, Horizon) nucleation. The transient operation increases EC emissions, consistent with its higher accumulation PM mode content. In general, solubility of organic carbon is higher (average ～5 times) for retrofitted vehicles than the baseline vehicle. The retrofitted vehicles with catalyzed filters (DPX, CCRT^®) had decreased OC solubility (WSOC/OC: 8–25%) unlike those with uncatalyzed filters (SCRT^®s, Horizon; WSOC/OC ～ 60–100%). Ammonium was present predominantly in the nucleation mode, indicating that ternary nucleation may be the responsible mechanism for formation of these particles.     

Utilization of Arachis hypogaea hull, an agricultural waste for the production of activated carbons to remove phenol from aqueous solutions

Arachis hypogaea hulls, an agricultural waste, were used to prepare activated carbon by chemical activation with zinc chloride under four different activation atmospheres. The most important parameter in chemical activation was found to be the chemical ratio (activating agent/precursor). Carbonization temperature and time are the other two important variables, which had significant effect on the pore structure of carbon. The maximum Brunquer-Emmett-Teller (BET) surface area and micropore volume of the activated carbon was found to be 418 m(2)/g and 0.28 cm(3)/g, respectively. The activated carbon developed shows substantial capability to adsorb phenol from aqueous solutions. The kinetic data were fitted to the models of intraparticle diffusion, pseudo-second-order, and Lagergren, and followed more closely the pseudo-second-order chemisorption model. The isotherm equilibrium data were well fitted by the Langmuir and Freundlich models. Solution pH has significant effect on adsorption and the maximum uptake of phenol was reported at pH 3.5.     

Heavy metals concentration in edible fishes from coastal region of Kalpakkam, southeastern part of India

Concentrations of Cu, Mn, Zn, Fe, Cr, and Pb were estimated using ICP-MS in nine commercially important and locally consumed fish species (Sarda orientalis, Scomberomorus commerson, Rastrelliger kanagurta, Sardinella longiceps, Paraplagusia bilineata, Cynoglossus lida, Cynoglossus macrostomus, Lepturacanthus savala, and Siganus javus) collected from coastal waters of Kalpakkam, eastern part of India. Their concentration (μg g(-1)) in the examined fish species ranged as follows: Cu (0.8-6.5), Zn (14.3-27.9), Mn (0.5-8.8), Fe (17.6-117.0), Cr (0.24-1.78), and Pb (0.18-2.29). Concentrations of most of the metals in the fish species studied were found to be safe for human consumption barring Mn.     

Investigating the impacts of treated effluent discharge on coastal water health (Visakhapatnam,SW coast of Bay of Bengal,India)

The present study investigated the impacts of treated effluent discharge on physicochemical and biological properties of coastal waters from three pharmaceuticals situated along the coast of Visakhapatnam (SW Bay of Bengal). Seawater samples were collected (during the months of December 2013, March 2014 and April 2014) from different sampling locations (Chippada (CHP), Tikkavanipalem (TKP) and Nakkapalli (NKP)) at 0- and 30-m depths within 2-km radius (0.5 km = inner, 1 km = middle and 2 km?=?outer sampling circles) from the marine outfall points. Physicochemical and biological parameters, which differed significantly within the stations, were likely to be influenced by strong seasonality rather than local discharge. Dissolved oxygen variability was tightly coupled with both physical and biological processes. Phytoplankton cell density and total chlorophyll (TChla) concentrations were significantly correlated with dissolved inorganic nutrient concentrations. CHP (December) represented a diatom bloom condition where the highest concentrations of diatom cells, total chlorophyll (TChla), dissolved oxygen coupled with lower zooplankton abundance and low nutrient levels were noticed. The centric diatom, Chaetoceros sp. (>?50%) dominated the phytoplankton community. TKP (March) represented a post-diatom bloom phase with the dominance of Pseudo-nitzschia seriata; zooplankton abundance and nutrient concentrations were minimum. Conversely, NKP (April) represented a warm well-stratified heterotrophic period with maximum zooplankton and minimum phytoplankton density. Dinoflagellate abundance increased at this station. Relatively higher water temperature, salinity, inorganic nutrients coupled with very low concentrations of dissolved oxygen, TChla and pH were observed at this station. Copepods dominated the zooplankton communities in all stations and showed their highest abundance in the innermost sampling circles. Treated effluent discharge did not seem to have any significant impact at these discharge points.