Communal nesting is explained by subsequent mating rather than kinship or thermoregulation in the Siberian flying squirrel

Research on group living in animals is concentrated on highly social species, but studying less social species may hint at the factors possibly leading to the evolution of increased sociality. Thermoregulation is often thought to explain communal nesting in solitarily breeding mammals but also other factors may be involved. For example, it is observed that even solitary species may have cryptic kin cooperation. We studied factors affecting communal nesting in the Siberian flying squirrel. Flying squirrels breed solitarily but, similar to most other rodents, adults may sometimes huddle in groups. Communal nesting in flying squirrels was most frequent during winter and autumn, but also occurred during other seasons. This pattern was explained by the breeding season, which took place in the spring–summer, when communal nesting was less common. Neither monthly temperature, after accounting for breeding season, nor daily temperatures in winter explained communal nesting. Group size was small, two to three individuals. In most cases the group was a pair consisting of unrelated male and female, possibly indicating that group formation was related to mating behavior. This study contributes to the understanding of mammalian group formation in two major ways. First, our study contributes to the understanding of the role of relatedness in rodent group formation, demonstrating a case where close relatedness is not related to group formation. Second, our study indicates that in a solitarily breeding, rodent huddling may be more driven by other factors than temperature.     

Three-dimensional characterization of the ammonia plume from a beef cattle feedlot

In Canada approximately 45% of ammonia (NH₃) emissions are attributed to dairy and beef cattle industries. The present study focused on NH₃ emissions from a beef feedlot with a one-time capacity of 17,220 head. The aim was to improve the Canadian NH₃ emission inventories and air quality forecasting capabilities. A Cessna 207, equipped with a fast-response NH₃/NO_y detector and a quadrupole aerosol mass spectrometer, was flown in a grid pattern covering an area of 8 × 8 km centered on a feedlot (800 × 800 m) at altitudes ranging from 30 to 300 m above ground. Stationary ground measurements of NH₃ concentration and turbulence parameters were made downwind of the feedlot. Three flights were conducted under varying meteorological conditions, ranging from very calm to windy with near-neutral stratification. NH₃ mixing ratios up to 100 ppbv were recorded on the calm day, up to 300 m above ground. An average feedlot NH₃ emission rate of 76 ± 4 μg m^?2 s^?1 (equivalent to 10.2 g head^?1 h^?1) was estimated. Characteristics of the measured NH₃ plume were compared to those predicted by a Lagrangian dispersion model. The spatially integrated pattern of NH₃ concentrations predicted and measured agreed but the measured was often more complex than the predicted spatial distribution. The study suggests that the export of NH₃ through advection accounted for about 90% of the emissions from the feedlot, chemical transformation was insignificant, and dry deposition accounted for the remaining 10%.     

Oxygenated polycyclic aromatic hydrocarbons in atmospheric particulate matter: Molecular characterization and occurrence

Particulate matter (PM) has become a major research issue receiving increasing attention because of its significant negative impact on human health. There are main indicators that next to the morphological characteristics of the particle, also the chemical composition plays an important role in the adverse health effects of PM. In this context, the rather polar organic fraction of PM is expected to play a major role, and advanced analytical techniques are developed to improve the knowledge on the molecular composition of this fraction. One component class that deserves major attention consists of the oxygenated polycyclic aromatic hydrocarbons (PAHs). Those compounds are considered to be among the key compounds in PM toxicity. This paper presents a comprehensive review focusing on the analysis, fate and behavior of oxygenated PAHs in the atmosphere. The first part of the paper briefly introduces (i) the main sources and atmospheric pathways of oxygenated PAHs, (ii) available physical–chemical properties and (iii) their health effects. The second and main part of this paper gives a thorough discussion on the entire analytical sequence necessary to identify and quantify oxygenated PAHs on atmospheric PM. Special attention is given to critical parameters and innovations related to (i) sampling, (ii) sample preparation including both extraction and clean-up, and (iii) separation and detection. Third, the state-of-the-art knowledge about the atmospheric occurrence of oxygenated PAHs is discussed, including an extended overview of reported concentrations presented as a function of sampling season and geographical location. A clear seasonal effect is observed with the median of the oxygenated PAHs concentrations during winter being a factor of 3–4 higher than during summer. However, the oxygenated PAH/parent PAH ratio is about 20 times higher during summer, indicating the importance of photochemical activity in the atmosphere.     

Farm-level assessment of CO2 and N2O emissions in Lower Saxony and comparison of implementation potentials for mitigation measures in Germany and England

Greenhouse gases (GHG) emissions from agricultural farming practice contribute significantly to European GHG inventories. For example, CO₂ is emitted when grassland is converted to cropland or when peatlands are drained and cultivated. N₂O emissions result from fertilization. Enabling farmers to reduce their GHG emissions requires sufficient information about its pressure–impact relations as well as incentives, such as regulations and funding, that support climate-friendly agricultural management. This paper discusses potentials to improve the supply of information on: farm-specific climate services or impacts, present policy incentives in Germany and England that support climate-friendly farm management and related adaptation requirements. Tools which have been developed for a farm environmental management software (to be added after review because of potential identification) are presented. These tools assess CO₂ emissions from grassland conversion to cropland and peatland cultivation, as well as N₂O emissions from nitrogen fertilization. As input data, the CO₂ tool requires a classification of soil types according to soil organic carbon storage. The input data based on soil profile samples was compared with reference data from the literature. The N₂O tool relies on farm data concerning fertilization. These tools were tested on three farms in order to determine their viability with respect to the availability of required data and the differentiation of results, which determines how well site-specific conservation measures can be identified. Assessing CO₂ retention function of grassland conservation to cropland on the test farms leads to spatially differentiated results (~100 to ~900 potentially mitigated t CO₂ ha^?1). Assessed N₂O emissions varied from 0.41 to 1.1 t CO₂eq. ha^?1 a^?1. The proposed methods support policies that promote a more differentiated funding of climate conservation measures. Conservation measures and areas can be selected so that they will have the greatest mitigation effects. However, even though present policy instruments in Germany and England, such as Cross Compliance and agri-environmental measures, have the potential to reduce agricultural GHG, they do not appear to guide measures effectively or site-specifically. In order to close this gap, agri-environmental measures with the potential to support climate protection should be spatially optimized. Additionally, the wetland restoration measures which are most effective in reducing GHG emissions should be included in funding schemes.     

Social licences to operate: for better not for worse; for richer not for poorer? The impacts of unplanned mining closure for “fence line” residential communities

Establishing “social licences to operate” with communities has become a significant corporate social responsibility agenda. The complex dynamics of these relationships can compound the impacts for communities when these contracts are not upheld. This article documents reflections from a rapid rural appraisal conducted in the Shire of Ravensthorpe in remote Western Australia after the Ravensthorpe Nickel Operation was “mothballed” 9 months into a projected 25-year lifespan. It captures how communication about the project and its time frames created a sense of consistency, predictability, certainty and trust – enabling social licence. The raising of hope and the emergence of mistrust underpin social, environmental and financial impacts of this event for the local community. Embedded in the theoretical dimensions of social licences, this case study highlights the problematic of social licences that engage with non-contractual stakeholders as partners in “booms” but have no legal responsibility towards them in times of “bust”.     

Gamma-dose rates from terrestrial and Chernobyl radionuclides inside and outside settlements in the Bryansk Region, Russia in 1996-2003

In order to estimate current external gamma doses to the population of the Russian territories contaminated as a result of the Chernobyl accident, absorbed gamma-dose rates in air (DR) were determined at typical urban and suburban locations. The study was performed in the western districts of the Bryansk Region within the areas of 30 settlements (28 villages and 2 towns) with the initial levels of 137Cs deposition ranging from 13 to 4340 kBqm(-2). In the towns, the living areas considered were private one-story wooden and stone houses. DR values were derived from in situ measurements performed with the help of gamma-dosimeters and gamma-spectrometers as well as from the results of soil samples analysis. In the areas under study, the values of DR from terrestrial radionuclides were 25+/-6, 24+/-5, 50+/-10, 32+/-6, 54+/-11, 24+/-8, 20+/-6, 25+/-8, and 18+/-5 nGyh(-1) at locations of kitchen gardens, dirt surfaces, asphalt surfaces, wooden houses, stone houses, grasslands inside settlement, grasslands outside settlement, ploughed fields, and forests, respectively. In 1996-2001, mean normalized (per MBqm(-2) of 137Cs current inventory in soil) values of DR from (137)Cs were 0.41+/-0.07, 0.26+/-0.13, 0.15+/-0.07, 0.10+/-0.05, 0.05+/-0.04, 0.48+/-0.12, 1.04+/-0.22, 0.37+/-0.07, and 1.15+/-0.19 microGyh(-1) at the locations of kitchen gardens, dirt surfaces, asphalt surfaces, wooden houses, stone houses, grasslands inside settlement, grasslands outside settlement, ploughed fields, and forests, respectively. The radiometric data from this work and the values of occupancy factors determined for the Russian population by others were used for the assessments of annual effective doses to three selected groups of rural population. The normalized (per MBqm(-2) 137Cs current ground deposition) external effective doses to adults from 137Cs ranged from 0.66 to 2.27 mSvy(-1) in the years 1996-2001, in accordance with professional activities and structures of living areas. For the areas under study, the average external effective doses from 137Cs were estimated to be in the range of 0.39-1.34 mSvy(-1) in 2001. The average external effective doses from natural radionuclides appeared to be lower than those from the Chernobyl fallout ranging from 0.15 to 0.27 mSvy(-1).     

Report: Combustion Byproducts and Their Health Effects: Summary of the 10th International Congress

The 10th International Congress on Combustion Byproducts and their Health Effects was held in Ischia, Italy, from June 17-20, 2007. It is sponsored by the US NIEHS, NSF, Coalition for Responsible Waste Incineration (CRWI), and Electric Power Research Institute (EPRI). The congress focused on: the origin, characterization, and health impacts of combustion-generated fine and ultrafine particles; emissions of mercury and dioxins, and the development/application of novel analytical/diagnostic tools. The consensus of the discussion was that particle-associated organics, metals, and persistent free radicals (PFRs) produced by combustion sources are the likely source of the observed health impacts of airborne PM rather than simple physical irritation of the particles. Ultrafine particle-induced oxidative stress is a likely progenitor of the observed health impacts, but important biological and chemical details and possible catalytic cycles remain unresolved. Other key conclusions were: (1) In urban settings, 70% of airborne fine particles are a result of combustion emissions and 50% are due to primary emissions from combustion sources, (2) In addition to soot, combustion produces one, possibly two, classes of nanoparticles with mean diameters of?~10?nm and?~1?nm. (3) The most common metrics used to describe particle toxicity, viz. surface area, sulfate concentration, total carbon, and organic carbon, cannot fully explain observed health impacts, (4) Metals contained in combustion-generated ultrafine and fine particles mediate formation of toxic air pollutants such as PCDD/F and PFRs. (5) The combination of metal-containing nanoparticles, organic carbon compounds, and PFRs can lead to a cycle generating oxidative stress in exposed organisms.