城市污水生物脱氮除磷机理研究进展

介绍了生物脱氮、除磷的基本原理，综述了国内上关于城市污水脱氮除磷机理方面的研究现状和进展，并对今后开展这方面的研究提出展望 。     

Effectiveness evaluation of water-sprinkling in controlling urban fugitive road dust based on TRAKER method: A case study in Baoding, China

Fugitive road dust (FRD) contributes a great deal to urban rainwater and air pollution and is commonly controlled by water-sprinkling in most Chinese cities. However, there is a lack of information on its effectiveness. We used the Testing Re-entrained Aerosol Kinetic Emissions from Roads (TRAKER) method to monitor different types of roads in Baoding city before and within 1 hr after water-sprinkling and obtained the road dirtiness index (a) and PM concentration in the road environment ($T_{\mathrm{T}}^{*}$), to evaluate the removal efficiency for PM deposited on the road surface (${\eta }_a$) and the reduction efficiency for the PM concentration in the road environment (${\eta }_{\text{PM}}$). The results give that the ${\eta }_a$ for three types of roads is ranked: branch road (87%-–100%) > major arterial road (80%-83%) > minor arterial road (68%-77%), and the ${\eta }_{\text{PM}}$ ranked: minor arterial road (70%) > branch road (46%-58%) > major arterial road (37%-53%). The ${\eta }_a$ and ${\eta }_{\text{PM}}$ varied non-linearly with time and presented a quadratic curve. The average effective control time (${\eta }_{\mathit{a}}$> 0) was 62 min on the major and minor arterial roads, and much longer than 1 hr on branch roads. The ${\eta }_{\text{PM}}$ values diminished completely by 72 min on average from the end of sprinkling for the three types of roads. Water-sprinkling can remove PM₁₀ particles from the road surface and reduce their concentration in the road environment more thoroughly than PM_2.5. Our findings could be helpful for controlling urban FRD emissions more efficiently and precisely.     

板材成形新技术及其发展趋势(Ⅱ)

介绍了多点成形技术、激光成形技术、冲压智能化技术、成形过程的计算机仿真技术等几种柔性化程度高的板材成形新技术及其发展趋势     

研究单位压边力值对板料成形性能的影响

主要介绍板料在拉深成形过程中单位压边力值对板料成形性能的影响。研究方法采用仿真技术 ,指出板料在成形过程中如按最初设定的单位压边力值进行成形 ,那么 ,板料成形过程中单位压边力值将逐渐增大 ,严重影响板料成形极限。如果采用控制板料在成形过程中压边圈下坯料的单位压边力值 ,将提高板料成形极限。其结论为生产现场提高板料成形性能和表面质量提供了一种可实施的方法。     

Characteristics of phosphorus chemistry and its geographical distribution in the Haihe River valley,North China

ＣｈａｒａｃｔｅｒｉｓｔｉｃｓｏｆｐｈｏｓｐｈｏｒｕｓｃｈｅｍｉｓｔｒｙａｎｄｉｔｓｇｅｏｇｒａｐｈｉｃａｌｄｉｓｔｒｉｂｕｔｉｏｎｉｎｔｈｅＨａｉｈｅＲｉｖｅｒｖａｌｌｅｙ，ＮｏｒｔｈＣｈｉｎａＪｉａｎｇＧａｏｍｉｎｇ；ＨｕａｎｇＹｉｎｘｉａｏ；Ｌ...     

Yellow River Valley flood and drought disaster:spatial-temporal distribution predictionand early-warning

ＹｅｌｌｏｗＲｉｖｅｒＶａｌｌｅｙｆｌｏｏｄａｎｄｄｒｏｕｇｈｔｄｉｓａｓｔｅｒ：ｓｐａｔｉａｌ－ｔｅｍｐｏｒａｌｄｉｓｔｒｉｂｕｔｉｏｎｐｒｅｄｉｃｔｉｏｎａｎｄｅａｒｌｙ－ｗａｒｎｉｎｇＧａｏＬｉｎ，ＳｈａＷａｎｙｉｎｇ，ＬｉｕＨｕａｉｑｕａｎ，...     

离子强度、pH值和Ca2+/Al3+对马尾松幼苗的铝毒影响

测定了在不同溶液酸度、不同离子强度和Ca~(2+)/Al~(3+)比下,铝对马尾松幼苗生长状况的影响。结果表明,溶液酸度增加,离子强度减小时,铝的毒害作用增大。钙对铝毒有明显缓解作用,当Ca~(2+)/Al~(3+)增大时,铝的毒性减小,但其缓解作用与铝浓度有关,当铝浓度增加,钙的缓解能力下降。     

中国米质气候资源的地域分布

稻米品质受着气候条件的明显影响。在我国不同地域，米质气候资源各不相同，对米质的影响也各具特色，总的趋势是，北方优于南方；西部优于东部；晚茬口水稻优于旱茬口；在地形复杂地区，米质气候资源还具有垂直地带性结构。我国丰富的米质气候资源为各种类型优质米的生产创造出优越的环境条件。     

The spatial and temporal distribution of total ozone over China

In this paper the grid data of total ozone mapping spectrograph (TOMS) installed on Nimbus-7 satellite (1978 to 1994) was used and the spatial and temporal distribution of total ozone over China was analyzed. The research indicates that the Qinghai-Tibet Plateau destroyed the latitudinal distribution of total ozone of China and the low value closed center emerged over Qinghai-Tibet Plateau. Long time change trends of seasonal total ozone of Qinghai-Tibet plateau are provided. It shows that the most obvious decrease of total ozone occurs in winter (Jan.), then in summer (Jul.), the relevant slow change occurs in autumn (Oct.) and spring (Apr.).     

城市生活垃圾现状与治理动态

主要阐述了我国城市生活垃圾的现状、现有处理城市生活垃圾的几种方法,并就治理趋势进行探讨。