Evaluation of PPCPs removal in a combined anaerobic digester-constructed wetland pilot plant treating urban wastewater

The removal efficiency of 16 pharmaceuticals and personal care products (PPCPs) from urban wastewater (dissolved and particulate phases) was evaluated for the first time in a hybrid pilot plant consisting of an upflow anaerobic sludge blanket reactor followed by two sequentially connected horizontal flow constructed wetlands: a surface flow wetland (SF CW) and a subsurface flow wetland (SSF CW). Whereas the PPCP removal associated with the dissolved phase exhibited a seasonal pattern, the fraction associated with the suspended solids showed less seasonality. In the dissolved phase, the overall removal efficiency in summer ranged from 70% to 85% for salicylic acid (SAL), methyl dihydrojasmonate, caffeine (CAF), ketoprofen and triclosan, whereas in winter it declined for most of the PPCPs to between 30% and 50%, except for CAF and SAL (>80%) and carbamazepine and butylated hydroxyl toluene (11-18%). In the suspended solids, the removal exceeded 80% for most of the target PPCPs. The efficiency of the different treatment steps was also compound-dependent, but the SF CW generally exhibited the highest removal efficiency for most of the contaminants analyzed. The characterization of the organic matter retained in the wetland gravel beds revealed the occurrence of hydrophobic contaminants such as phthalate esters and fragrances at moderate concentrations (i.e., up to 3.5 μg kg⁻¹), which declined strongly over the course of the different treatment steps. In the SF CW, the net mass accumulation rates of tonalide and galaxolide were 4 and 23 g y⁻¹ respectively, whereas in the SSF CW they were 0.3 and 1.8 g y⁻¹ respectively.     

The Chemical Composition and Flow of the River Lea, Spain

Weekly measurements of chemical composition were made at four sampling sites on the Lea River (Spain) between July 1985 and August 1986. at two stations there were gauging-weirs for stream discharge monitoring. Conductivity, pH, alkalinity, silicon, calcium, magnesium, sodium, potassium, ammonia, nitrate, sulphate, chloride, reactive phosphate, and total phosphate, were recorded in each site.

Results were analysed using multiple regression techniques to study the relationship between flow and chemical components.

Conductivity, alkalinity, calcium, magnesium and sulphate were strongly related to flow, decreasing in concentration with increased flow. Ammonia, potassium, reactive phosphate and total phosphate varied most widely, with peaks at times of heavy rainfall. Nitrate increased at times of high discharge, with little variation between sampling points. Silicon decreased in summer and autumn in the lower catchment area whilst chloride and sodium were higher in the lower catchment of the River Lea.     

Changes in the chemical and physicochemical properties of the solid fraction of cattle slurry during composting using different aeration strategies

Replacement of peat as a growing medium by a renewable material, such as an organic waste, is an issue of concern since harvesting of peat has a considerable environmental impact and, actually, it is a non-renewable resource. Cattle manure is a readily available organic waste, which means that once it goes through the composting process, it can be used as an alternative to peat, specifically, the solid fraction obtained from mechanical liquid-solid separation of cattle slurry (SF). Studies have shown it to be suitable for such uses. The purpose of this study was to detect possible changes in the physicochemical and chemical properties of SF when it is composted using different aeration strategies, with an emphasis on the changes that would make it feasible for use as a substrate. With this aim in mind, an experiment was designed with three aeration strategies that would be used during composting. The first consisted of applying air through a static method (forced ventilation). The second involved improving aeration by adding a bulking agent and a dynamic turning method. In the third strategy, aeration was carried out by turning (control). The results show that the different aeration strategies had a clear effect on the evolution of pH, electrical conductivity (EC), nitrate-N, ammonia-N and bicarbonate content. Nitrification was favored under good aeration conditions using the static composting method, probably due to the greater availability of ammonia-N that was transformed into nitrate-N. In general, the low buffering capacity allowed for a reduction of the pH during the curing stage of composting (in conjunction with low temperatures during this period), a characteristic that favors the use of this compost as a growing medium. We also conclude that measuring bicarbonate levels during composting could be used as an indicator of the possible acidification of the material and as a way of evaluating the level of material aeration.     

Photocatalytic degradation of the diazo dye naphthol blue black in water using MWCNT/Gd,N,S-TiO2 nanocomposites under simulated solar light

A simple sol–gel method was employed to prepare gadolinium, nitrogen and sulphur tridoped titania decorated on oxidised multiwalled carbon nanotubes (MWCNT/Gd,N,S-TiO₂), using titanium (IV) butoxide and thiourea as titanium and nitrogen and sulphur source, respectively. Samples of varying gadolinium loadings (0.2%, 0.6%, 1.0% and 3.0% Gd^3 +) relative to titania were prepared to investigate the effect of gadolinium loading and the amounts of carbon nanotubes, nitrogen and sulphur were kept constant for all the samples. Furthermore, the prepared nanocomposites were evaluated for the degradation of naphthol blue black (NBB) in water under simulated solar light irradiation. Higher degradation efficiency (95.7%) was recorded for the MWCNT/Gd,N,S-TiO₂ (0.6% Gd) nanocomposites. The higher photocatalytic activity is attributed to the combined effect of improved visible light absorption and charge separation due to the synergistic effect of Gd, MWCNTs, N, S and TiO₂. Total organic carbon (TOC) analysis revealed a higher degree of complete mineralisation of naphthol blue black (78.0% TOC removal) which minimises the possible formation of toxic degradation by-products such as the aromatic amines. The MWCNT/Gd,N,S-TiO₂ (0.6% Gd) was fairly stable and could be re-used for five times, reaching a maximum degradation efficiency of 91.8% after the five cycles.     

Metals and metalloid bioconcentrations in the tissues of Typha latifolia grown in the four interconnected ponds of a domestic landfill site

The uptake of metals in roots and their transfer to rhizomes and above-ground plant parts (stems, leaves) of cattails (Typha latifolia L.) were studied in leachates from a domestic landfill site (Etueffont, France) and treated in a natural lagooning system. Plant parts and corresponding water and sediment samples were taken at the inflow and outflow points of the four ponds at the beginning and at the end of the growing season. Concentrations of As, Cd, Cr, Cu, Fe, Mn, Ni and Zn in the different compartments were estimated and their removal efficiency assessed, reaching more than 90% for Fe, Mn and Ni in spring and fall as well in the water compartment. The above- and below-ground cattail biomass varied from 0.21 to 0.85, and 0.34 to 1.24 kg dry weight/m², respectively, the highest values being recorded in the fourth pond in spring 2011. The root system was the first site of accumulation before the rhizome, stem and leaves. The highest metal concentration was observed in roots from cattails growing at the inflow of the system''s first pond. The trend in the average trace element concentrations in the cattail plant organs can generally be expressed as: Fe > Mn > As > Zn > Cr > Cu > Ni > Cd for both spring and fall. While T. latifolia removes trace elements efficiently from landfill leachates, attention should also be paid to the negative effects of these elements on plant growth.     

Analysis of micronucleated erythrocytes in heron nestlings from reference and impacted sites in the Ebro basin (N.E. Spain)

The frequency of micronuclei (MN) in peripheral erythrocytes was tested for 59 heron nestlings (Ardea purpurea, Egretta garzetta and Bubulcus ibis) sampled at two areas (polluted and reference) on the River Ebro (NE Spain) and at its Delta during Spring 2006. Flow-cytometry analysis revealed higher (three- to six-fold) MN counts in samples from the most polluted site relative to samples from the reference area. Samples from the Delta showed intermediate values. Age, morphometric parameters (weight, tarsus size and bill-head length) and maturation status showed no significant differences among the different populations for each species; nor were they correlated with MN levels. The data suggest that elevated levels of MN in chicks in impacted areas reflected the chemical pollution of their nesting sites. The use of nestlings for this assay appears to be a convenient, non-destructive method to assess the impact of pollution in natural bird populations.     

Fine and coarse particulate matter chemical characterization in a heavily industrialized city in central Mexico during Winter 2003

This paper presents the results of the first reported study on fine particulate matter (PM) chemical composition at Salamanca, a highly industrialized urban area of Central Mexico. Samples were collected at six sites within the urban area during February and March 2003. Several trace elements, organic carbon (OC), elemental carbon (EC), and six ions were analyzed to characterize aerosols. Average concentrations of PM with aerodynamic diameter of less than 10 microm (PM10) and fine PM with aerodynamic diameter of less than 2.5 microm (PM2.5) ranged from 32.2 to 76.6 [g m(-3) and 11.1 to 23.7 microg m(-3), respectively. OC (34%), SO4= (25.1%), EC (12.9%), and geological material (12.5%) were the major components of PM2.5. For PM10 geological material (57.9%), OC (17.3%), and SO4= (9.7%) were the major components. Coarse fraction (PM,, -PM2.5), geological material (81.7%), and OC (8.6%) were the dominant species, which amounted to 90.4%. Correlation analysis showed that sulfate in PM2.5 was present as ammonium sulfate. Sulfate showed a significant spatial variation with higher concentrations to the north resulting from predominantly southwesterly winds above the surface layer and by major SO2 sources that include a power plant and refinery. At the urban site of Cruz Roja it was observed that PM2.5 mass concentrations were similar to the submicron fraction concentrations. Furthermore, the correlation between EC in PM2.5 and EC measured from an aethalometer was r(2) = 0.710. Temporal variations of SO2 and nitrogen oxide were observed during a day when the maximum concentration of PM2.5 was measured, which was associated with emissions from the nearby refinery and power plant. From cascade impactor measurements, the three measured modes of airborne particles corresponded with diameters of 0.32, 1.8, and 5.6 microm.