Removal of an anionic dye (Acid Blue 92) by coagulation–flocculation using chitosan

Chitosan (a biopolymer) is an aminopolysaccharide that can be used for the treatment of colored solutions by coagulation–flocculation (as an alternative to more conventional processes such as sorption). Acid Blue 92 (a sulfonic dye) was selected as a model dye for verifying chitosan's ability to treat textile wastewater. A preliminary experiment demonstrated that chitosan was more efficient at color removal in tap water than in demineralized water, and that a substantially lower concentration of chitosan could be used with tap water. Dye removal reached up to 99% under optimum concentration; i.e., in terms of the acidic solutions and the stoichiometric ratio between the amine groups of the biopolymer and the sulfonic groups in the dye. The flocs were recovered and the dye was efficiently removed using alkaline solutions (0.001–1 M NaOH solutions) and the biopolymer, re-dissolved in acetic acid solution, was reused in a further treatment cycle.     

Determination of direct and fugitive PM emissions in a Mediterranean harbour by means of classic and novel tracer methods

Remodelling works are frequent in harbour areas, given that they must adapt to rapidly changing market requirements. Depending on their nature (construction, demolition, etc.), these works may be carried out during long periods of time and thus exert a significant impact on the air quality at the harbours and their surroundings. The air quality at the Valencia harbour was studied during an enlargement project. Four sampling stations aimed to cover the major dust-emitting activities in the harbour. In addition, a sampling campaign was carried out to collect dust materials at their emission sources (e.g., loading and unloading of clinker and petroleum coke, as well as the enlargement works). Differences obtained between PM levels at the monitoring sites were correlated with the distance between sampling stations and enlargement works and/or harbour operations, as well as with the preferential wind direction. In all cases, the days with the highest PM_10 levels were linked to wind directions coinciding with the location of the enlargement works or the clinker and petroleum coke stocks. Classic source apportionment methodologies (PCA and CMB) were applied to the data, but their interpretation was complex due to the similar chemical signatures of PM originating from direct and fugitive emissions from stocked materials (e.g., clinker), and the enlargement works. To overcome this difficulty, a novel non-statistical approach was used to obtain quantitative estimations of the contributions from sources (petroleum coke and clinker), based on the correlation between specific PM components (e.g., carbonaceous species) and source tracers (e.g., V). Finally, a qualitative test using phenolphthalein was devised to identify the presence of clinker on the filters, which provided positive results. This novel tracer approach is thus recommended for harbour authorities.     

Atmospheric composition change research: Time to go post-normal?

For more than two decades a number of frameworks for scientific knowledge production are being proposed by science and technology researchers. They all advocate an extended involvement of non-specialists, in particular when it comes to knowledge production applicable to practical societal problems. We look to what extent these new frameworks have taken ground within a particular research community: the ACCENT Network of Excellence which coordinates European atmospheric chemistry and physics research applicable to air pollution and climate change. We did so by stimulating a debate through a “blog”, a survey and in-depth interviews with ACCENT scientists about the interaction between science, policy making and civil society, to which a great deal of ACCENT member contributed in writing or verbally. Most of them had interactions with policy makers and/or the general public, and they generally believe that interactions with spheres other than the scientific are needed. While such interactions give personal insight and satisfaction, they seem to have little impact on the goals and the practice of the scientific work itself. Extended frameworks of science production that go beyond the disciplinary mode seem to emerge at the level of individual scientists, yet they still need to find their way to the level of scientific project management. In this paper we discuss the justifications and barriers to implement a higher degree of extended knowledge integration in applied science projects such as ACCENT. It is felt that the community of atmospheric chemists and physicists is mature for such an implementation and recommendations are given to help and make this happen.     

Agricultural Abandonment in the North Eastern Iberian Peninsula: The Use of Basic Landscape Metrics to Support Planning

Land abandonment is an important cause of changes in landscape patterns in the Mediterranean area. There is a need to monitor land use and land cover changes in order to provide quantitative evidence of the relationship between land abandonment and the formation of new landscape patterns. Appropriate management policies to encourage sustainable development can then be developed. This paper describes how to monitor landscape dynamics using different temporal land use and land cover data generated from field survey and airborne information. The results showed that the abandonment of agricultural land generally results in an increase of vegetation biomass. This process leads to homogenization of the landscape. In addition, abandonment promotes fragmentation of agricultural land. Based on these results, the paper discusses the implications for rural management policies concerning the abandonment of agricultural land and suggests recommendations for the development of such policies.     

Interaction and impacts of two introduced species on a soft-sediment marine assemblage in SE Tasmania

Introduced species are having major impacts in terrestrial, freshwater and marine ecosystems world-wide. It is increasingly recognised that effects of multiple species often cannot be predicted from the effect of each species alone, due to complex interactions, but most investigations of invasion impacts have examined only one non-native species at a time and have not addressed the interactive effects of multiple species. We conducted a field experiment to compare the individual and combined effects of two introduced marine predators, the northern Pacific seastar Asterias amurensis and the European green crab Carcinus maenas, on a soft-sediment invertebrate assemblage in Tasmania. Spatial overlap in the distribution of these invaders is just beginning in Tasmania, and appears imminent as their respective ranges expand, suggesting a strong overlap in food resources will result from the shared proclivity for bivalve prey. A. amurensis and C. maenas provide good models to test the interaction between multiple introduced predators, because they leave clear predator-specific traces of their predatory activity for a number of common prey taxa (bivalves and gastropods). Our experiments demonstrate that both predators had a major effect on the abundance of bivalves, reducing populations of the commercial bivalves Fulvia tenuicostata and Katelysia rhytiphora. The interaction between C. maenas and A. amurensis appears to be one of resource competition, resulting in partitioning of bivalves according to size between predators, with A. amurensis consuming the large and C. maenas the small bivalves. At a large spatial scale, we predict that the combined effect on bivalves may be greater than that due to each predator alone simply because their combined distribution is likely to cover a broader range of habitats. At a smaller scale, in the shallow subtidal, where spatial overlap is expected to be most extensive, our results indicate the individual effects of each predator are likely to be modified in the presence of the other as densities increase. These results further highlight the need to consider the interactive effects of introduced species, especially with continued increases in the number of established invasions.Communicated by M.S. Johnson, Crawley     

Early life histories in the bryozoan<Emphasis Type="Italic"> Schizobrachiella sanguinea</Emphasis>: a case study

Mediterranean populations of Schizobrachiella sanguinea seem to span a wide range of contrasting benthic habitats. We have studied adult, larval, and recruit populations of S. sanguinea from sublittoral (approximately 10 m depth) communities at Blanes (Spain, NW Mediterranean). At the study site, the species colonises semi-obscure caves and, to a lesser extent, communities of sciaphilic algae. Our first goal was to show the periods of brooding, larval release, and recruitment. Plankton was collected about twice a week between July 1998 and June 2000 over an artificial reef. A total of 303 larvae were collected in 23 of the 102 days of sampling. At the study site the species shows a single, annual larval release period, which occurs from late March to June–July every year. Recruits were found from late May to late August 1999 and in late May 2000. A recruitment peak was observed in July 1999 and again in late May 2000. The presence of brooding adults corresponded to the periods of larval supply and recruitment. Our second goal was to investigate the causes of the variable distribution of the species along several communities in the north-west Mediterranean Sea. We describe adult distribution and the dynamics of larval supply, recruitment of early (15 days from settlement) and late (4 months from settlement) recruits. Patterns of larval presence and early recruit distribution along the communities on the reef did not reflect the adult distributions, whereas this was closely matched by the distribution of late recruits. Post-recruitment mortality strongly affected recruits of the PA (photophilic algae) and SA (sciaphilic algae) communities, whereas it was very low in the communities of SOC (semi-obscure caves). Mortality of recruits was density independent and colony survivorship in the SA communities, where recruitment was the highest, appeared strongly affected by competition with brown algae. Like the majority of cheilostomate bryozoans, S. sanguinea releases a coronate larva capable of active swimming and positive reaction to light. Such swimming abilities may allow larvae to actively select the substrate on which to settle and to avoid unsuitable substrates. It seems that larval behaviour does not explain the preference of S. sanguinea for sciaphilic habitats. High post-recruitment mortality due to various factors, especially competition with fast-growing algae, seems particularly relevant in determining the adult distributions observed.Communicated by S.A. Poulet, Roscoff     

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site. The mineral factor, attributed to the sum of several sources (mainly the ceramic industry, but also with minor contributions from soil resuspension and African dust outbreaks) contributes between 9 and 11 microg m(-3) at all the sites. Source industrial 1 entails an increase in PM(10) levels between 4 and 5 microg m(-3) at the urban sites and 2 microg m(-3) at the suburban background site. However, after 2004, this source contributed less than 2 microg m(-3) at most sites, whereas the remaining sources did not show an upward or downward trend along the study period. This gradual decrease in the contribution of source industrial 1 coincides with the implementation of PM abatement technology in the frit fusion kilns of the area. This relationship enables us to assess the efficiency of the implementation of environmental technologies in terms of their impact on air quality.     

Atmospheric particulate matter and air quality in the Mediterranean: a review

This article synthesises the results obtained in several projects on atmospheric aerosol (particulate matter – PM) pollution developed during the last years in the Western Mediterranean. It focuses on particulate matter sources and the strategies for suitable monitoring in ambient air. The article has been structured in several sections that give response to the main questions that prompted these studies. After analysing the main PM features in the Mediterranean, a brief review of the main factors differentiating the particulate matter composition with respect to Central Europe is presented. Finally, the suitability of the different metrics or parameters for monitoring ambient air PM levels in different types of environments is discussed. Selected article from the 6th European Meeting on Environmental Chemistry, University of Belgrade, Serbia and Montenegro organized by Prof. Dr. Branimir Jovancicevic (www.research.plymouth.ac.uk/ace).     

Determination of Motor Vehicle Profiles for Non-Methane Organic Compounds in the Mexico City Metropolitan Area

ABSTRACT

Non-methane organic compound (NMOC) profiles for on-road motor vehicle emissions were measured in a downtown tunnel and parking garages in Mexico City during 1996. Hydrocarbon samples from the tunnel and ambient air samples (C2-C12) were collected using stainless steel canisters, and carbonyl compounds were collected using 2,4-dinitrophenylhydrazine (DNPH) impregnated cartridges. Canister samples were analyzed by gas chromatog-raphy/flame ionization detection (GC/FID) to ascertain detailed hydrocarbon composition. DNPH samples were analyzed by high performance liquid chromatography (HPLC). NMOC source profiles were quantified for evaporative emissions from refueling, cold start, and hot soak, and on-road operating conditions. The ultimate purpose will be to determine the apportionment of ambient NMOC concentrations using the Chemical Mass Balance (CMB) model. The tunnel profile contained 42.3 ppbC% of alkanes, 20.6 ppbC% of unsaturated compounds, and 22.4 ppbC% of aromatics. The most abundant species were acetylene with 7.22 ppbC%, followed by ipentane with 5.69 ppbC%, and toluene with 5.42 ppbC%. These results were compared with those from studies in the United States. The cold start profile was found to be similar to the tunnel profile, although there were differences in the content of acetylene, isopentane, and oxygenates. The abundance of saturated NMOC in the hot soak profile was similar to gasoline head space profiles; it was also much larger than saturated NMOC in the roadway profile.     

Interactive effects of metal contamination and pathogenic organisms on the introduced marine bivalve Ruditapes philippinarum in European populations

In natural environment, marine organisms are concomitantly exposed to pollutants and multiple disease agents resulting in detrimental interactions. The present study evaluated interactive effects of metal contamination (cadmium) and pathogenic organisms (trematode parasites Himasthla elongata and pathogenic bacteria Vibrio tapetis) singularly and in combination on the bivalve Ruditapes philippinarum, an introduced species to Europe, under laboratory controlled conditions. After 7 days, metal bioaccumulation and pathogen load were analyzed as well as metallothionein (MT) response and hemocyte concentrations and activities. Results showed that infection by opportunistic pathogens affects metal accumulation, leading to maximal Cd accumulation in co-infected clams. Among stressors only V. tapetis induced significant effects on immune parameters whereas a particular interaction “trematode-bacteria” was shown on MT responses. Despite low trematode infection in agreement with the resistant status of R. philippinarum to these macroparasites, significant interaction with bacteria and metal occurred. Such results highlight the necessity of taking pathogens into account in ecotoxicological studies.