Carbon exchange between ecosystems and atmosphere in the Czech Republic is affected by climate factors

By comparing five ecosystem types in the Czech Republic over several years, we recorded the highest carbon sequestration potential in an evergreen Norway spruce forest (100%) and an agroecosystem (65%), followed by European beech forest (25%) and a wetland ecosystem (20%). Because of a massive ecosystem respiration, the final carbon gain of the grassland was negative. Climate was shown to be an important factor of carbon uptake by ecosystems: by varying the growing season length (a 22-d longer season in 2005 than in 2007 increased carbon sink by 13%) or by the effect of short- term synoptic situations (e.g. summer hot and dry days reduced net carbon storage by 58% relative to hot and wet days). Carbon uptake is strongly affected by the ontogeny and a production strategy which is demonstrated by the comparison of seasonal course of carbon uptake between coniferous (Norway spruce) and deciduous (European beech) stands.     

The impact of recycled coarse aggregates obtained from waste concretes on lightweight pervious concrete properties

Environmental Science and Pollution Research - Significant environmental damage can result from the use of natural resources such as cement, aggregate, and water in concrete production. Thus, more...     

Liquid crystallinity of levan/water/starch solutions

Transmitted light measurements performed with a UV-visible spectrophotometer were used to characterize how starch affects the position of boundaries on the phase diagram for dilute aqueous solutions of levan (a branched polymer of fructose). Data were collected in the range 15 to 70°C; the minimum concentrations required for separation of a nematic phase and the minimum concentration required for a fully nematic solution were identified within this range. While hard interactions (repulsion between rod-like molecular segments) dictate the formation of a liquid crystalline phase at and above ambient temperature in the absence of starch, soft interactions become more significant as solutions are cooled toward ambient when starch is present. Small amounts of starch might be used as a filler to modify the mechanical properties (while retaining the process-related benefits) of levan films cast from liquid crystalline solution.     

Complex co‐substrate addition increases initial petroleum degradation rates during land treatment by altering bacterial community physiology

A pilot‐scale land treatment unit (LTU) was constructed at the former Guadalupe oil production field with the purpose of investigating the effect of co‐substrate addition on the bacterial community and the resulting rate and extent of total petroleum hydrocarbon (TPH) degradation. The TPH was a weathered mid‐cut distillate (C10‐C32) excavated from the subsurface and stockpiled before treatment. A control cell (Cell 1) in the LTU was amended with nitrogen and phosphorus while the experimental cell (Cell 2) was amended with additional complex co‐substrate—corn steep liquor. During the pilot LTU operation, measurements were taken of TPH, nutrients, moisture, aerobic heterotrophic bacteria (AHB), and diesel oxidizing bacteria (DOB). The bacterial community was also assayed using community‐level physiology profiles (CLPP) and 16S rDNA terminal restriction fragment (TRF) analysis. TPH degradation in both cells was characterized by a rapid phase of degradation that lasted for the first three weeks, followed by a slower degradation phase that continued through the remainder of the project. The initial rate of TPH‐degradation in Cell 1 (?0.021 day^?1) was slower than in Cell 2 (?0.035 day^?1). During the slower phase, degradation rates in both cells were similar (?0.0026 and ?0.0024 respectively). AHB and DOB counts were similar in both cells during the fast degradation phase. A second addition of co‐substrate to Cell 2 at the beginning of the slow degradation phase resulted in an increased AHB population that lasted for the remainder of the project but did not affect TPH degradation rates. CLPP data showed that co‐substrate addition altered the functional capacity of the bacterial community during both phases of the project. However, TRF data indicated that the phylogenetic composition of the community was not different in the two cells during the fast degradation phase. The bacterial phylogenetic structure in Cell 2 differed from Cell 1 after the second application of co‐substrate, during the slow degradation phase. Thus, co‐substrate addition appeared to enhance the functional capacity of the bacterial community during the fast degradation phase when the majority of TPH was bioavailable, resulting in increased degradation rates, but did not affect rates during the slow degradation phase when the remaining TPH may not have been bioavailable. These data show that co‐substrate addition might prove most useful for applications such as land farming where TPH is regularly applied to the same soil and initial degradation rates are more important to the project goals. © 2003 Wiley Periodicals, Inc.     

Mixed Integer Linear Programming Models for Selecting Ground-Level Ozone Control Strategies

The traditional strategy for ground-level ozone control is to apply emission reductions across the board throughout certain time periods and locations. In this paper, we study various mixed integer linear programming (MILP) models that seek to select targeted control strategies for the Dallas Fort-Worth (DFW) region to reduce emissions, in order to achieve the State Implementation Plan (SIP) requirements with minimum cost. Statistics and optimization methods are used to determine a potential set of cost-effective control strategies for reducing ozone. These targeted control strategies are specified for different types of emission sources in various time periods and locations. Three MILP models, a static model, a sequential model, and a dynamic model, are studied in this research. These different MILP models allow decision makers to study how the targeted control strategies change under different circumstances. Meanwhile, two types of auxiliary variables are considered as supplemental control strategies in the optimization if the current set of control strategies is unable to reduce ozone to comply with the 8-h ozone standard. Results from the different models can provide decision makers with information concerning how the effectiveness of the control strategies varies with daily emission patterns and meteorology.     

South African mining equipment and specialist services: Technological capacity,export performance and policy

South Africa has developed a technologically sophisticated and globally competitive mining equipment and specialist services sector. The paper provides evidence for and measurement of technological competency and global competitiveness and a brief outline of why South Africa was successful in this regard. While there are significant prospects for future growth, there are, at the same time, a number of constraints and South Africa is becoming a less advantageous site for both production and for innovation. Current government policy does not address these constraints and the sector does not feature in government’s vision for industrial or technology development. An alternative approach is proposed whereby the constraints are addressed and the companies supplying the mining sector that have sophisticated technological competencies are encouraged to spread “laterally” into new products and new global markets. By way of conclusion, the importance of this sector in developing countries where mining plays a major role is outlined.     

Impact of combining chlorine dioxide and chlorine on DBP formation in simulated indoor swimming pools

The main objective of this study was to assess the combined use of chlorine dioxide (ClO2) and chlorine (Cl2) on the speciation and kinetics of disinfection by-product (DBP) formation in swimming pools using synthetic pool waters prepared with a body fluid analog (BFA) and/or fresh natural water. At 1:25 (mass ratio) of ClO2 to Cl2, there was no significant reduction in the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) for both BFA solution and natural water compared to the application of Cl2 alone. When the mass ratio of ClO2 to Cl2 increased to 1:1, substantial decreases in both THMs and HAAs were observed in the natural water, while there was almost no change of DBP formations in the BFA solution. Haloacetonitriles and halonitromethanes levels in both water matrices remained similar. In the presence of bromide, the overall DBP formation increased in both BFA solution and natural water. For the DBP formation kinetics, after 72 hr of contact time, very low formation of THMs and HAAs was observed for the use of ClO2 only. Compared to Cl2 control, however, applying the 1:1 mixture of ClO2/Cl2 reduced THMs by > 60% and HAAs by > 50%. Chlorite was maintained below 1.0 mg/L, while the formation of chlorate significantly increased over the reaction time. Finally, in a bench-scale indoor pool experiment, applying ClO2 and Cl2 simultaneously produced less THMs compared to Cl2 control and kept chlorite at < 0.4 mg/L, while HAAs and chlorate accumulated over 4-week operation period.     

Sequential extraction of cadmium in different soil phases and plant parts from a former industrialized area

Cd concentrations in mobile phases of soil are more representative than total Cd concentration for estimating Cd bioavailability, physicochemical reactivity and mobility. In this study, selective sequential extraction procedures were used to determine Cd in different soil phases. Soil samples and plants grown in these soils were collected from a serpentine and copper-mining area in Maden-Elazig-Turkey. The extracted fractions were exchangeable/carbonate, reducible-iron/manganese oxides, oxidizable-organic matter and sulfides, and residual phases except silicates. Concentrations of Cd in soils and plant samples were determined by flame atomic absorption spectrometry and inductively coupled plasma-mass spectrometry. We found that Cd concentrations in the EDTA and NH₂OH·HCl extracts are higher in most soil samples compared to the other extracts. We conclude that Cd levels in mobile phases are unexpectedly high. The observed Cd concentrations are in ranges of 0.03–3.4 mg kg⁻¹ for soil and 0.02–2.5 mg kg⁻¹ for plant parts. The percentages of cadmium up to 56% in exchangeable and carbonates fractions were observed to be significantly higher than in those values less than 2% reported in literature. This study has shown that the modified extraction method can be usefully applied to determine Cd concentrations in potentially mobile phase of soil. Furthermore, it was concluded that Brassicasea and Rumex leaves can be used as hyperaccumulator plants because their translocation factor and/or enrichment coefficient values were found to be higher than 1.0.     

The role of positive affectivity in team effectiveness during crises

Organizational efforts to improve team effectiveness in crisis situations primarily have focused on team training initiatives and, to a lesser degree, on staffing teams with respect to members' ability, experience, and functional backgrounds. Largely neglected in these efforts is the emotional component of crises and, correspondingly, the notion of staffing teams with consideration for their affective makeup. To address this void, we examined the impact of team member dispositional positive affect (PA) on team crisis effectiveness and the role of felt negative emotion in transmitting that influence. A study of 21 nuclear power plant crews engaged in crisis training simulations revealed that homogeneity in PA, but not mean‐level PA, was associated with greater team effectiveness. Mediation analysis suggested that homogeneity in PA leads to greater team effectiveness by reducing the amount of negative emotions that team members experience during crises. Furthermore, homogeneity in PA compensated for lower mean‐level PA in predicting effectiveness. Discussion focuses on the implications of these findings for understanding and further exploring the importance of affective factors and especially team affective composition in team crisis performance. Copyright © 2012 John Wiley & Sons, Ltd.