Evaluation of a conceptual model for the subsurface transport of plutonium involving surface mediated reduction of PuV to PuIV

A conceptual model is proposed to explain the transport behavior of plutonium in laboratory columns packed with a sandy coastal soil from the U.S. Department of Energy (DOE)'s Savannah River Site. The column transport experiments involved the introduction of a finite step input of plutonium, predominately in the +5 oxidation state, into the columns followed by elution with a low-carbonate solution of 0.02 M NaClO4 at pH 3, 5, and 8. Total plutonium concentrations were measured in the effluent as a function of time. These elution profiles suggest at least two distinct physical/chemical forms of plutonium, each with a different mobility. To explain the observed behavior, the following conceptual model was evaluated: [1] equilibrium partitioning of plutonium (V) and plutonium (IV) between the aqueous and sorbed phases as defined by pH-dependent, oxidation-state specific distribution coefficients and [2] kinetic reduction of plutonium (V) to plutonium (IV) in the sorbed phase. The conceptual model was applied to the column experiments through a one-dimensional advective/dispersive mathematical model, and predictions of the mathematical model were compared with the experimental data. Overall, the model was successful in predicting some of the major features observed in the experiments. It also yielded quantitative estimates of the rate constant for surface mediated reduction of plutonium (V) to plutonium (IV) that were of the same order (10(-4) to 10(-5) s(-1)) as those calculated from batch data both for this soil and for goethite.     

Apatite and phillipsite as sequestering agents for metals and radionuclides

Laboratory and greenhouse studies were conducted to quantify apatite and phillipsite (zeolite) sequestration of selected metal contaminants. The laboratory batch study measured the sorption of aqueous Co2+, Ba2+, Pb2+, Eu3+, and UO2(2+). Apatite sorbed more Co2+, Pb2+, Eu3+, and UO2(2+) from the spike solution than phillipsite, resulting in distribution coefficients (Kd values) of >200,000 L kg(-1). Phillipsite was more effective than apatite at sorbing aqueous Ba2+. Results from the laboratory study were used to design the greenhouse study that used a soil affected by a Zn-Pb smelter from Pribram, Czech Republic. Two application rates (25 and 50 g kg(-1)) of phillipsite and apatite and two plant species, maize (Zea mays L.) and oat (Avena sativa L.), were evaluated in this study. There was little (maize) to no (oat) plant growth in the unamended contaminated soil. Apatite and, to a slightly lesser extent, phillipsite additions significantly enhanced plant growth and reduced Cd, Pb, and Zn concentrations in all analyzed tissues (grain, leaves, and roots). The sequestering agents also affected some essential elements (Ca, Fe, and Mg). Phillipsite reduced Fe and apatite reduced P and Fe concentrations in oat tissues; however, the level of these elements in oat leaves and grains remained sufficient. Sequential extractions of the soil indicated that the Cd, Pb, and Zn were much more strongly sorbed onto the amended soil, making the contaminants less phytoavailable.     

On averting the tragedy of the commons

One of the enduring facts of the human condition is that the earth's resources are finite and its environment fragile. It is also evident that human behavior is rarely based on an appreciation of these facts. While the outlook may be bleak, so are some of the proposed solutions. Reasonable people have suggested that, to survive, an environmentally enlightened authoritarian government must be adopted. This article suggests that such a solution is unworkable, in part because it fails to consider critical aspects of human nature. A framework is proposed for developing solutions compatible with human capabilities.     

Adaptive social impact management for conservation and environmental management

Concerns about the social consequences of conservation have spurred increased attention the monitoring and evaluation of the social impacts of conservation projects. This has resulted in a growing body of research that demonstrates how conservation can produce both positive and negative social, economic, cultural, health, and governance consequences for local communities. Yet, the results of social monitoring efforts are seldom applied to adaptively manage conservation projects. Greater attention is needed to incorporating the results of social impact assessments in long‐term conservation management to minimize negative social consequences and maximize social benefits. We bring together insights from social impact assessment, adaptive management, social learning, knowledge coproduction, cross‐scale governance, and environmental planning to propose a definition and framework for adaptive social impact management (ASIM). We define ASIM as the cyclical process of monitoring and adaptively managing social impacts over the life‐span of an initiative through the 4 stages of profiling, learning, planning, and implementing. We outline 14 steps associated with the 4 stages of the ASIM cycle and provide guidance and potential methods for social‐indicator development, predictive assessments of social impacts, monitoring and evaluation, communication of results, and identification and prioritization of management responses. Successful ASIM will be aided by engaging with best practices – including local engagement and collaboration in the process, transparent communication of results to stakeholders, collective deliberation on and choice of interventions, documentation of shared learning at the site level, and the scaling up of insights to inform higher‐level conservation policies‐to increase accountability, trust, and perceived legitimacy among stakeholders. The ASIM process is broadly applicable to conservation, environmental management, and development initiatives at various scales and in different contexts.     

Catalytic wet air oxidation of bisphenol A solution in a batch-recycle trickle-bed reactor over titanate nanotube-based catalysts

Catalytic wet air oxidation (CWAO) is classified as an advanced oxidation process, which proved to be highly efficient for the removal of emerging organic pollutant bisphenol A (BPA) from water. In this study, BPA was successfully removed in a batch-recycle trickle-bed reactor over bare titanate nanotube-based catalysts at very short space time of 0.6 min g_CAT?g^?1. The as-prepared titanate nanotubes, which underwent heat treatment at 600 °C, showed high activity for the removal of aqueous BPA. Liquid-phase recycling (5- or 10-fold recycle) enabled complete BPA conversion already at 200 °C, together with high conversion of total organic carbon (TOC), i.e., 73 and 98 %, respectively. The catalyst was chemically stable in the given range of operating conditions for 189 h on stream.     

An investigation of engine and fuel system performance in a diesel engine operating on waste cooking oil

Waste cooking oil (WCO) was experimentally examined to determine whether it can be used as an alternative fuel in a 3-cylinder, 4-stroke, direct injection, 48 kW power tractor engine. The test engine was operated under full load conditions using diesel fuel and waste vegetable oil from the 2400 to 1100 rpm and performance values were recorded. Tests were performed in two stages to evaluate the effect of the waste oils on the engine life cycle. When the test engine was operated with diesel fuel and waste cooking oil; engine torque decreased between at ratio of 0.09 % and 3% according to the engine speed. While no significant difference occurs in the diesel fuel tests at the end of 100 hours of operation, an important reduction was observed in the engine torque of the WCO engine between 4.21% and 14.48% according to the engine speed, and an increase in average smoke opacity ratio was also observed. In accordance with the results obtained from the studies, it was determined that the engine performance values of waste cooking oil show similar properties with diesel fuel, but in long-term usage, performance losses increased. In the SEM analysis performed on the fuel system, there were dark deposits at the nozzle tip and stem. According to an EDX analysis at the nozzle tips, the detected elements point to engine oil ash in the combustion chamber and show coking products (C and O). The other elements (Na, S, Ca, P, Cl, and K) point to used WCO.     

The Sustainability of Subsistence Hunting in the Neotropics

Hunting is an important component of native subsistence strategies in Amazonia. It is also a serious threat to biodiversity in some areas. We present data on the faunal harvests of two native Neotropical subsistence hunting peoples, Machiguenga bow-hunters and Piro shotgun hunters of Peru. The rate of annual harvest per square kilometer of catchment is estimated and compared to rates of sustainable harvest calculated by Robinson and Redford (1991). We used indicators of prey abundance to test for the depletion of species that hunters killed in numbers greater than what the model predicts to be sustainable. As predicted, we found the strongest evidence for local depletion of the large primates at the Piro site. The woolly monkey ( Lagothrix lagothricha) harvest at the Machiguenga village and the deer ( Mazama americana) and collared peccary (Tayassu tajacu) harvests at both sites were not predicted to be unsustainable and we found no evidence for depletion. Machiguenga bow hunters killed spider monkeys (Ateles paniscus) in quantities that were slightly above what the model predicted to be sustainable, yet we found no evidence for depletion. Differential species vulnerability, catchment size, and consumer population size could be important factors in determining sustainability.     

Linking river, floodplain, and vadose zone hydrology to improve restoration of a coastal river affected by saltwater intrusion

Floodplain forests provide unique ecological structure and function, which are often degraded or lost when watershed hydrology is modified. Restoration of damaged ecosystems requires an understanding of surface water, groundwater, and vadose (unsaturated) zone hydrology in the floodplain. Soil moisture and porewater salinity are of particular importance for seed germination and seedling survival in systems affected by saltwater intrusion but are difficult to monitor and often overlooked. This study contributes to the understanding of floodplain hydrology in one of the last bald cypress [Taxodium distichum (L.) Rich.] floodplain swamps in southeast Florida. We investigated soil moisture and porewater salinity dynamics in the floodplain of the Loxahatchee River, where reduced freshwater flow has led to saltwater intrusion and a transition to salt-tolerant, mangrove-dominated communities. Twenty-four dielectric probes measuring soil moisture and porewater salinity every 30 min were installed along two transects-one in an upstream, freshwater location and one in a downstream tidal area. Complemented by surface water, groundwater, and meteorological data, these unique 4-yr datasets quantified the spatial variability and temporal dynamics of vadose zone hydrology. Results showed that soil moisture can be closely predicted based on river stage and topographic elevation (overall Nash-Sutcliffe coefficient of efficiency = 0.83). Porewater salinity rarely exceeded tolerance thresholds (0.3125 S m(-1)) for bald cypress upstream but did so in some downstream areas. This provided an explanation for observed vegetation changes that both surface water and groundwater salinity failed to explain. The results offer a methodological and analytical framework for floodplain monitoring in locations where restoration success depends on vadose zone hydrology and provide relationships for evaluating proposed restoration and management scenarios for the Loxahatchee River.     

The effects of pH, bromide and nitrite on halonitromethane and trihalomethane formation from amino acids and amino sugars

In this study, the effects of pH, bromide and nitrite on the formation of halonitromethanes (HNMs) and trihalomethanes (THMs) from eight amino acids (glycine, alanine, serine, cysteine, aspartic acid, glutamic acid, lysine and histidine) and four amino sugars (glucosamine, galactosamine, N-acetylglucosamine and N-acetylneuraminic acid) were examined for chlorination and ozonation followed by chlorination. During ozonation-chlorination, two amino acids, glycine and lysine, exhibited distinctly higher HNM formation than the other compounds. The formation of HNMs was higher at pH 8 than 6. Glycine and lysine also produced higher levels of THMs than the other compounds at pH 8. The presence of nitrite resulted in an increase in HNM formation. The presence of bromide increased the HNM formation, especially brominated HNM species. Bromine incorporation factors of trihalogenated HNMs were higher than those of THMs. For chlorination alone, HNM levels were about the detection limit (4 nM or 0.7 μg L⁻¹) at pH 6 and 8, and in the presence of bromide or nitrite. Amino acids and amino sugars tested, except glycine and lysine, showed relatively low levels of THM (∼15 μg L⁻¹) formation.