Protective effect of overlying geosynthetic on geomembrane liner observed from landfill field tests and inclined board laboratory experiments.

Geosynthetic liner systems are generally installed in landfill sites to prevent toxic leachate from escaping into the adjoining environment by utilizing their impervious characteristics. Therefore, it is important to protect the geomembrane from being damaged or destroyed during all phases of landfilling, namely landfill construction, waste tipping and landfill closure. This paper presents firstly the observed performance of a geomembrane liner from a landfill site where the geomembrane liner was installed on the slopes of a Korean landfill; and secondly the results of an inclined board laboratory test. Two types of experiments were conducted to identify the protecting effect of the overlaying geosynthetic on the geomembrane liners. At a testing landfill site, the slope consisted of three different sub-inclines and two 2-m-wide intermediate levels. The sub-inclines were each 8 m in vertical height and their angle of inclination was 1: 1.5 (vertical: horizontal). The reported observations were made for a time period of approximately 1 year, until the landfill was filled with wastes to the top of the uppermost slope. In addition, inclined board laboratory tests were carried out. During the inclined board test, a base table is inclined slowly and steadily until the block located on the base table starts to slide, when the tension and displacements of two geosynthetics, namely the geomembrane liner and protecting geotextile, are measured. In conclusion, test results showed that the down-drag force generated by waste accumulation and sliding of upper material was to a large extent dissipated through the elongation of the protecting geosynthetic overlying the geomembrane and thus was not transferred to the geomembrane. Unless the protecting geosynthetic undergoes structural failure, this stress relaxation phenomenon continues to occur so that the magnitude of tensile force to be applied on the geomembrane remains marginal.     

Human Enteric Viruses in Groundwater

Waterborne outbreaks of enteric viruses are a major public health concern. The present study has been carried out to assess the presence of enteric viruses responsible for human acute gastroenteritis (AGE) in groundwater intended for drinking and produce washing. In total, 62 samples from groundwater for drinking and produce washing collected from Dec 2007 to Dec 2008 in Seoul were tested for enteric viruses using conventional RT–PCR, ELISA, and real-time RT–PCR. Our results showed that enteric viruses were detected in 7 (8.8%) groundwater samples. Rotaviruses were detected in 3 (4.8%) of the samples by ELISA; human adenoviruses were detected in 2 (3.2%) of the samples by ELISA; and nested RT–PCR detected noroviruses in 2 (3.2%) of the samples. In one of the groundwater sample, the norovirus RNA was detected by conventional RT–PCR which was confirmed positive by real-time RT–PCR. Additionally, real-time RT–PCR successfully detected norovirus RNA in five out of 62 water samples (8.1%). The data demonstrate that real-time RT–PCR will be useful as a rapid and sensitive method for detecting norovirus in water samples. Phylogenetic analysis revealed that the noroviruses detected in two of the groundwater samples belonged to GII-4. These studies can provide important information for the prevalence of enteric viruses in Korean groundwater.     

Mercury emission trend influenced by stringent air pollutants regulation for coal-fired power plants in Korea

Regulatory control of mercury emission from anthropogenic sources has become a global concern in the recent past. Coal-fired power plants are one of the largest sources of anthropogenic mercury emission into the atmosphere. This paper summarizes the current reducing trend of mercury emission as co-beneficial effect by more stringent regulation changes to control primary air pollutants with introducing test results from the commercial coal-fired facilities and suggesting a guideline for future regulatory development in Korea. On average, mercury emission concentrations ranged 16.3–2.7 μg Sm^?3, 2.4–1.1 μg Sm^?3, 3.1–0.7 μg Sm^?3 from anthracite coal-fired power plants equipped with electrostatic precipitator (ESP), bituminous coal-fired power plants with ESP + flue gas desulphurization (FGD) and bituminous coal-fired power plants with selective catalytic reactor (SCR) + cold side (CS) ? ESP + wet FGD, respectively. Among the existing air pollution control devices, the best configuration for mercury removal in coal-fired power plants was SCR + CS ? ESP + wet FGD, which were installed due to the stringent regulation changes to control primary air pollutants emission such as SO₂, NOx and dust. It was estimated that uncontrolled and controlled mercury emission from coal-fired power plants as 10.3 ton yr^?1 and 3.2 ton yr^?1 respectively. After the installation of ESP, FGD and SCR system, following the enforcement of the stringent regulation, 7.1 ton yr^?1 of mercury emission has been reduced (nearly 69%) from coal-fired power plants as a co-benefit control. Based on the overall study, a sample guideline including emission limits were suggested which will be applied to develop a countermeasure for controlling mercury emission from coal-fired power plants.     

The toxic effects of neem extract and azadirachtin on the brown planthopper, Nilaparvata lugens (Stål) (BPH) (Homoptera: Delphacidae)

Extracts of neem (Azadirachta indica A. Juss) are used in the developing world for many purposes including management of agricultural insect pests. The effects of different neem extracts (aqueous (NSKEaq), ethanol (NSKEeth) and hexane (NSKEhex)) on mortality, survival and weight of the brown planthopper, Nilaparvata lugens (St?l) (BPH) (Homoptera: Delphacidae) third and fourth nymphal instars were investigated. When fed rice plants treated with neem derivatives in bioassays, the survival of BPH nymphs is affected. Comparisons were made with the pure neem limonoid, azadirachtin (AZA) to ascertain its role as a compound responsible for these effects. AZA was most potent in all experiments and produced almost 100% nymphal mortality at 0.5 ppm and higher concentrations. When higher concentrations were applied, the effects appeared shortly after treatment and mortality was higher. Many insects died after remaining inactive for several days or during prolonged moulting. At lower concentrations, if moulting was achieved, disturbed growth and abnormalities were then likely to occur in the moulting process. Nymphs that were chronically exposed to neem extract showed a reduction in weight (45-60%). The results clearly indicate the simple NSKE (aqueous, ethanolic or both), containing low concentrations of AZA, can be used effectively to inhibit the growth and survival of BPH.     

The monitoring of biofilm formation in a mulch biowall barrier and its effect on performance

Lab scale mulch biofilm biowall barriers were constructed and tested to monitor the effect of biofilm formation on the performance of the biobarrier. Naphthalene, a two-ring polycyclic aromatic hydrocarbon (PAH), was used as the model compound. With column reactors, the amounts of viable naphthalene degraders and biofilm formation were monitored, as was the performance of the biobarrier. The sorption capacity of the mulch, the increase in biomass and the extracellular polymeric substance (EPS) content of the biofilm created a strong affinity for naphthalene and induced an increase in the number of slowly growing hydrocarbon degraders, resulting in a higher degradation rate and more stable PAH removal. Concentration profiles of pore water naphthalene and electron acceptors indicated that dissolved oxygen (DO) was preferentially used as the electron acceptor, and the greatest removal occurred at the inlet to the column reactor where DO was highest. However, when using nitrate as an alternative electron acceptor, both biofilm formation and continual degradation of naphthalene also occurred. Microprofiles of DO in the biofilm revealed that oxygen transport in the biofilm was limited, and there might be sequential utilization of nitrate for naphthalene removal in the anoxic zones of the biofilm. These results provide insight into the distribution of viable biomass and biofilm EPS production in engineered permeable reactive mulch biobarriers.     

An Estimation of Construction and Demolition Debris in Seoul,Korea: Waste Amount,Type, and Estimating Model

ABSTRACT

Construction and demolition (C&D) debris is generated at the site of various construction activities. However, the amount of the debris is usually so large that it is necessary to estimate the amount of C&D debris as accurately as possible for effective waste management and control in urban areas. In this paper, an effective estimation method using a statistical model was proposed. The estimation process was composed of five steps: estimation of the life span of buildings; estimation of the floor area of buildings to be constructed and demolished; calculation of individual intensity units of C&D debris; and estimation of the future C&D debris production. This method was also applied in the city of Seoul as an actual case, and the estimated amount of C&D debris in Seoul in 2021 was approximately 24 million tons. Of this total amount, 98% was generated by demolition, and the main components of debris were concrete and brick.     

Factors dominating stratification cycle and seasonal water quality variation in a Korean estuarine reservoir

A comprehensive monitoring program was conducted during 2005-2007 to investigate seasonal variations of hydrologic stability and water quality in the Yeongsan Reservoir (YSR), located at the downstream end of the Yeongsan River, Korea. A principal component analysis (PCA) was performed to identify factors dominating the seasonal water quality variation from a large suite of measured data--11 physico-chemical parameters from 48 sampling sites. The results showed that three principal components explained approximately 62% of spatio-seasonal water quality variation, which are related to stratifications, pollutant loadings and resultant eutrophication, and the advective mixing process during the episodic rainfall-runoff events. A comparison was then made between YSR and an upstream freshwater reservoir (Damyang Reservoir, DYR) in the same river basin during an autumn season. It was found that the saline stratification and pollutant input from the upstream contributed to greater concentrations of nutrients and organic matter in YSR compared to DYR. In YSR, saline stratification in combination with thermal stratification was a dominant cause of the longer period (for two consecutive seasons) of hypoxic conditions at the reservoir bottom. The results presented here will help better understand the season- and geography-dependent characteristics of reservoir water quality in Asian Monsoon climate regions such as Korea.     

Characteristics of gas and residues produced from electric arc pyrolysis of waste lubricating oil

An attempted has been made to recover high-calorific fuel gas and useful carbonaceous residue by the electric arc pyrolysis of waste lubricating oil. The characteristics of gas and residues produced from electric arc pyrolysis of waste lubricating oil were investigated in this study. The produced gas was mainly composed of hydrogen (35–40%), acetylene (13–20%), ethylene (3–4%) and other hydrocarbons, whereas the concentration of CO was very low. Calorific values of gas ranged from 11,000 to 13,000 kcal kg^?1 and the concentrations of toxic gases, such as NO_x, HCl and HF, were below the regulatory emissions limit. Gas chromatography–mass spectrometry (GC/MS) analysis of liquid-phase residues showed that high molecular-weight hydrocarbons in waste lubricating oil were pyrolyzed into low molecular-weight hydrocarbons and hydrogen. Dehydrogenation was found to be the main pyrolysis mechanism due to the high reaction temperature induced by electric arc. The average particle size of soot as carbonaceous residue was about 10 μm. The carbon content and heavy metals in soot were above 60% and below 0.01 ppm, respectively. The utilization of soot as industrial material resources such as carbon black seems to be feasible after refining and grinding.