城市污染河湖的综合整治技术及应用研究

分析了城市污染河流和湖泊污染的原因,将污染河流和湖泊治理的方法分为＂物理法、化学法、生物法、生态法＂共四大类,介绍了常用技术方法的原理和特点。根据河流和湖泊的污染现状和治理目标,提出了城市污染河湖的综合整治分为＂治理＂与＂生态修复＂两个阶段,探讨了采用＂截污、清淤、曝气、生物载体、水生植物＂等综合应用技术治理河湖的必要性和迫切性,并结合近年来国内河湖综合整治的典型案例,总结了河湖整治过程的＂基础措施＂和＂关键措施＂。     

汶川地区龙门山系滑坡稳定性分析与评价

近年来,随着高速公路的快速发展,大型重点工程项目的日益增多,滑坡治理问题开始凸显,特别是滑坡治理工程也显得越来越重要。针对汶川地区大型滑坡体的特点,取龙门山系的一处大型滑坡为例,结合前期勘察的资料及工程地质条件,对该大型滑坡的成因机制和形成条件进行了分析,查明了滑坡的发育条件及其分布特征,同时对滑坡的破坏模式进行了分析,结合天然工况、暴雨工况和地震工况开展了滑坡稳定性系数和推力计算,对滑坡进行了稳定性分析与评价。结果表明,滑坡总体稳定,局部有失稳的可能。在未来持续暴雨的作用下,可能出现局部变形加剧,稳定系数进一步降低,考虑到G213线对汶川经济和社会稳定的重要性,对其进行一定的工程治理措施是必要的,最后结合滑坡的特点为其治理提出了建议。     

锦州市典型畜禽养殖场周边土壤污染状况调查分析

采用综合污染指数法对锦州市农村两家畜禽养殖场区周边土壤监测数据进行评估,分析了畜禽粪便对畜禽养殖场周边土壤中重金属污染的影响。     

鞍钢钢绳厂生产污水处理的工艺设计及运行效果

本文介绍了鞍钢钢绳厂生产废水处理工艺,包括沉淀系统、气浮系统、砂滤罐过滤系统。通过试验确定p H为11时,沉淀系统对Zn2+的去除率达到98.4%。通过正交试验确定当PAC用量为20 mg/L、PAM用量为2 mg/L、p H 7.5、气浮压力为1.2 Mpa时气浮系统对钢绳厂废水中SS、石油类、COD的去除率分别达到90%、70%、70%。经过砂滤罐过滤系统后废水中的SS为20 mg/L、石油类为2 mg/L、COD为48 mg/L,其去除率分别达到94%、78%、80%。     

喷射时刻对柴油甲醇组合燃烧发动机颗粒物排放的影响

为了进一步减少甲醇掺烧后的柴油机颗粒物排放,在一台由增压中冷的高压共轨柴油机改造成的柴油甲醇组合燃烧(DMCC—diesel/methanol compound combustion)发动机上详细研究了柴油喷射时刻对两种燃料共燃时的颗粒物生成及其排放的影响.试验工况选择重型柴油机常用的A50工况.试验结果表明,当柴油在上止点后喷射时,颗粒物排放的数量浓度随着甲醇替代率的增加而减少,当上止点前喷射时,颗粒物的数量浓度先减少后增加.随着喷射时刻的提前,颗粒中超细颗粒所占比例增大.随着喷射时刻的推迟,甲醇替代率降低颗粒物质量浓度的作用增强,同时甲醇替代率降低颗粒物几何平均直径的作用减弱.     

Technological Progress, Structural Change and China＇s Energy Efficiency

China has witnessed rapid economic development since 1978, and during the time, energy production and consumption developed at a tremendous speed as well. Energy efficiency which can be measured by energy consumption per unit of GDP, however, experienced continuous decrease. Theoretically, the change of energy efficiency can be attributed to industry structural change and technological change. In order to explain the transformation of Chinese energy efficiency, we adopt logarithmic mean Divisia index techniques to decompose changes in energy intensity in the period of 1994-2005. We find that technological change is the dominant contributor in the decline of energy intensity, but the contribution has declined since 2001. The change in industry structure has decreased the energy intensity before 1998, but raised the intensity after 1998. Decomposed technological effects for all sectors indicate that technological progresses in high energy consuming industries such as raw chemical materials and chemical products, smelting and pressing of ferrous metals, manufacture of non-metallic mineral products and household contribute are the principal drivers of China＇s declining energy intensity.     

CO_2 Emission Induced by Urban Household Consumption in China

Household consumption is one of the important factors that induce COL emission. Based on input-output model, this article calculated the intensity of CO2 emission of different income groups and seven provinces in China, and then estimated total CO2 emission induced by urban household consumption from 1995 to 2004 in China based on statistic data of household living expenditure. The results show that CO2 emission per capita induced by household consumption had increased from 1583 to 2498 kg CO2 during 1995-2004. The ratio of consumption-induced CO2 emission to total CO2 emission had risen from 19% to 30% in the past decade. Indirect CO2 emission accounted for an important part of the consumption-induced emission, the ratio of indirect emission to consumption-induced emission had risen from 69% to 79% during the same period. A significant difference in consumption-induced CO2 emission across different income groups and different regions has been observed. COs emission per capita of higher income groups and developed regions increased faster than that of lower income groups and developing regions. Changing lifestyle has driven significant increase in CO2 emission. Especially, increases in private transport expenditure （for example, vehicle expenditure） and house building expenditure are key driving factors of growth in consumption-induced COL emission. There are big differences in the amount of CO2 emission induced by change in lifestyle across different income groups and provinces. It can be expected that lower income households and developing regions will increase consumption to improve their livings with income growth in the future, which may induce much more CO2 emission. A reasonable level of CO2 emission is necessary to satisfy human needs and to improve living standard, but a noticeable fact is that CO2 emission per capita induced by household consumption in developed areas of China had reached a quite high level. Adjustment in lifestyle towards a low-carbon society is in urgent need.     

“地震安全示范小区”的建设

地震是自然灾害之首，仅“5·12”汶川特大地震瞬间就夺去了近9万同胞的生命，伤亡总数近40万人，直接经济损失达1万多亿元人民币。     

Penicillin fermentation residue biochar as a high-performance electrode for membrane capacitive deionization

● We have provided an activated method to remove the toxicity of antibiotic residue. ● PFRB can greatly improve the salt adsorption capacity of MCDI. ● The hierarchical porous and abundant O/N-doped played the key role for the high-capacity desalination. ● A new field of reuse of penicillin fermentation residue has been developed. Membrane capacitive deionization (MCDI) is an efficient desalination technology for brine. Penicillin fermentation residue biochar (PFRB) possesses a hierarchical porous and O/N-doped structure which could serve as a high-capacity desalination electrode in the MCDI system. Under optimal conditions (electrode weight, voltage, and concentration) and a carbonization temperature of 700 °C, the maximum salt adsorption capacity of the electrode can reach 26.4 mg/g, which is higher than that of most carbon electrodes. Furthermore, the electrochemical properties of the PFRB electrode were characterized through cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) with a maximum specific capacitance of 212.18 F/g. Finally, biotoxicity tests have showed that PFRB was non-biotoxin against luminescent bacteria and the MCDI system with the PFRB electrode remained stable even after 27 adsorption–desorption cycles. This study provides a novel way to recycle penicillin residue and an electrode that can achieve excellent desalination.