Performance of an electrochemical COD (chemical oxygen demand) sensor with an electrode-surface grinding unit

An electrochemical COD (chemical oxygen demand) sensor using an electrode-surface grinding unit was investigated. The electrolyzing (oxidizing) action of copper on an organic species was used as the basis of the COD measuring sensor. Using a simple three-electrode cell and a surface grinding unit, the organic species is activated by the catalytic action of copper and oxidized at a working electrode, poised at a positive potential. When synthetic wastewater was fed into the system, the measured Coulombic yields were found to be dependent on the COD of the synthetic wastewater. A linear correlation between the Coulombic yields and the COD of the synthetic wastewater was established (10-1000 mg L(-1)) when the electrode-surface grinding procedure was activated briefly at 8 h intervals. When various kinds of wastewater samples obtained from various sewage treatment plants were measured, linear correlations (r(2)> or = 0.92) between the measured EOD (electrochemical oxygen demand) value and COD of the samples were observed. At a practical wastewater treatment plant, the measurement system was successfully operated with high accuracy and good stability over 3 months. These experimental results show that the application of the measurement system would be a rapid and practical method for the determination of COD in water industries.     

Formation and emission status of PCDDs/PCDFs in municipal solid waste incinerators in Korea

This study was carried out to examine the formation and the emission status of polychlorinated dibenzo-p-dioxins/polychlorinated dibenzofurans (PCDDs/PCDFs) in the flue gases of commercial-scale municipal solid waste (MSW) incinerators, and thus to provide the engineering data for the reduction of PCDDs/PCDFs emitted from MSW incinerators. The formation concentrations of the PCDDs/PCDFs generated at the outlet of waste heat boilers (WHB) were in the range of 1.18-29.61 ng-TEQ/N m3 (average 5.75 ng-TEQ/N m3), while the emission concentrations at the stacks were in the range of 0.026-4.548 ng-TEQ/N m3 (average 0.924 ng-TEQ/N m3). Two major 2,3,7,8-substituted congeners were 2,3,4,7,8-PeCDF and 2,3,4,6,7,8-HxCDF, and their concentrations were up to 50% and 64% of total TEQ values at the outlet of WHB and the stack, respectively. From the results of multi-regression analysis, the formation concentration of PCDDs/PCDFs could be predicted as follows with the correlation factor of r2 = 0.962: PCDDs/PCDFs (ng-TEQ/N m3) = 3.036 (Cl) + 0.094 (T1) - 0.472 (Combustibles) + 0.059 (CO) - 0.039 (THC) - 3.366 (H) + 22.157, where T1 (degrees C) is the temperature at the outlet of the WHB. Cl, Combustibles and H are given as percentages and the others are in parts per million.     

The mixing and segregation characteristics of rice straw in a cylindrical bubbling fluidized bed

In the present study, an experiment was performed to investigate the mixing and segregation characteristics of standard sand and rice straw particles in a cylindrical bubbling fluidized bed. The mass ratio (rice straw/standard sand = 0.5–1.25 %) of two particles and superficial gas velocity (0.13–0.18 m/s) were changed as experimental variables. The pressure drop curve and Kramer’s equation were used to determine the minimum fluidization velocity and mixing index, respectively. In all cases, the mixing index was the lowest at U/U _mf = 1.15. Based on the point of U/U _mf = 1.15, the segregation region and mixing region were observed. In the segregation region, mass ratio of 0.75 % showed the lowest mixing index. At the U/U _mf = 1.23 which was selected as the starting of fast pyrolysis considering residence time and the previous fast pyrolysis experiment, mass ratio of 1.25 % showed the highest mixing index which was 0.90.     

Optical and microphysical properties of severe haze and smoke aerosol measured by integrated remote sensing techniques in Gwangju,Korea

Aerosol optical and microphysical parameters from severe haze events observed in October 2005 at Gwangju, Korea (35.10°N, 126.53°E) were determined from the ground using a multi-wavelength Raman lidar, a sunphotometer, and a real-time carbon particle analyzer and from space using satellite retrievals. Two different aerosol types were identified based on the variability of optical characteristics for different air mass conditions. Retrievals of microphysical properties of the haze from the Raman lidar indicated distinct light-absorbing characteristics for different haze aerosols originating from eastern and northern China (haze) and eastern Siberia (forest-fire smoke). The haze transported from the west showed moderately higher absorbing characteristics (SSA = 0.90 ± 0.03, 532 nm) than from the northern direction (SSA = 0.96 ± 0.02). The organic/elemental carbon (OC/EC) ratio varied between 2.5 ± 0.4 and 4.1 ± 0.7.     

Aging estimation of reactor pressure vessel in the field using magnetic properties

Many researchers have been interested in the nondestructive measurement methods for estimating components damage in order to assure the safe service of steel structures. It is recognized that the evaluating techniques based on magnetic measurement can offer a great potential because of high susceptibility to the change of several metallurgical factors. Magnetic property such as coercive force was measured. The coercive force at room temperature monotonously increased with the increase of frequency. The correlation between the magnetic properties of used material and that of un-used material was studied. The coercive force gradient at room temperature increased with the increase of aging. Hence the estimating method using magnetic properties allows one to evaluate the extent of material aging for reactor pressure vessel.     

Implication of the cluster analysis using greenhouse gas emissions of Asian countries to climate change mitigation

Climate change caused by excessive emission of greenhouse gases (GHGs) into the atmosphere has gained serious attention from the global community for a long time. More and more countries have decided to propose their goals such as Paris agreements, to reduce emitting these heat trapping compounds for sustainability. The Asian region houses dramatic changes with diverse religions and cultures, large populations as well as a rapidly changing socio-economic situations all of which are contributing to generating a mammoth amount of GHGs; hence, they require calls for related studies on climate change strategies. After pre-filtering of GHG emission information, 24 Asian countries have been selected as primary target countries. Hierarchical cluster analysis method using complete linkage technique was successfully applied for appropriate grouping. Six groups were categorized through GHG emission properties with major and minor emission sectors based on the GHG inventory covering energy, industrial processes, agriculture, waste, land use change, and forestry and bunker fuels. Assigning six groups using cluster analysis finally implied that the approach to establish GHG emission boundaries was meaningful to develop further mitigation strategies. Following the outcome of this study, calculating amount of reduction potential in suitable sectors as well as determining best practice, technology, and regulatory framework can be improved by policy makers, environmental scientists, and planners at the different levels. Therefore, this work on reviewing a wide range of GHG emission history and establishing boundaries of emission characteristics would provide further direction of effective climate change mitigation for sustainability and resilience in Asia.     

Correction to: Biosolids application affects the competitive sorption and lability of cadmium,copper, nickel,lead, and zinc in fluvial and calcareous soils

Environmental Geochemistry and Health - Unfortunately, in the original publication of the article, Prof. Yong Sik Ok’s affiliation was incorrectly published.     

Degradation of ammonium dinitramide (ADN) in digested sewage sludge under strict anaerobic conditions

The biodegradation of one popular nitramine energetics, ammonium dinitramide (ADN) by mixture of denitrifying bacterial species was investigated. ADN was observed to be effectively mineralized in the anaerobic mixed culture. The initial ADN concentration of 250 mg/L was reduced to non‐detectable levels (> 99% removal efficiency) in 5 days of incubation under anaerobic conditions. Final products generated from anaerobic degradation of nitramine energetics by anaerobic metabolism were NH₄ ⁺, CH₄, and CO₂ that were released to the environment with the denitrifiers’ growth. In addition, it was found that the activity of denitrifiers was inhibited by high concentration of ammonia generated through the degradation reactions of energetic nitrites.