多溴联苯醚降解和分析研究进展

介绍了多溴联苯醚(PBDEs)在环境中的分布情况，综述了近年来国内外对PBDEs测定方法以及化学催化降解、生物降解和热解等PBDEs降解技术的研究进展，并对PBDEs研究的未来发展方向进行了展望。     

Measured reduction of kerbside ultrafine particle number concentrations in Copenhagen

The average particle number concentration kerbside at a busy street in Copenhagen has been reduced by 27% from the period 2002–2004 to the period 2005–2007. The reduction is in the ultrafine particle range (<100 nm). Strong evidence indicates that a significant part of the reduction, especially in the size range <30 nm, is due to the transition to sulphur-free (<10 ppm) diesel fuel and petrol in Denmark at New Year 2005.     

Investigation of the Potential Antimicrobial Efficacy of Sealants Used in HVAC Systems

ABSTRACT

Recent experiments confirm field experience that duct cleaning alone may not provide adequate protection from regrowth of fungal contamination on fiberglass duct liner (FGDL). Current recommendations for remediation of fungally contaminated fiberglass duct materials specify complete removal of the materials. But removal of contaminated materials can be extremely expensive. Therefore, a common practice in the duct-cleaning industry is the postcleaning use of antimicrobial surface coatings with the implication that they may contain or limit regrowth.

Little information is available on the efficacy of these treatments. This paper describes a study to evaluate whether three commercially available antimicrobial coatings, placed on a cleaned surface that 1 year previously had been actively growing microorganisms, would be able to prevent regrowth. The three coatings contained different active antimicrobial compounds. All three of the coatings were designed for use on heating, ventilation, and air conditioning (HVAC) system components or interior surfaces of lined and unlined duct systems. Coating I was a polyacrylate copolymer containing zinc oxide and borates. Coating II was an acrylic coating containing decabromodiphenyl oxide and antimony trioxide. Coating III was an acrylic primer containing a phosphated quaternary amine complex.

The study included field and laboratory assessments. The three treatments were evaluated in an uncontrolled field setting in an actual duct system. The laboratory study broadened the field study to include a range of humidities under controlled conditions. Both static and dynamic chamber laboratory experiments were performed. The results showed that two of the three antimicrobial coatings limited the regrowth of fungal contamination, at least in the short term (the 3-month time span of the study); the third did not. Before use in the field, testing of the efficacy of antimicrobial coatings under realistic use conditions is recommended because antimicrobials have different baseline activities and interact differently with the substrate that contains them and their local environment.     

Effects of natural organic matter type and concentration on the aggregation of citrate-stabilized gold nanoparticles

The aggregation of 12 nm citrate-stabilized gold nanoparticles (cit-AuNPs) in the presence of four different natural organic matter (NOM) isolates and a monovalent electrolyte (KCl) was evaluated using time-resolved dynamic light scattering. All four NOM isolates stabilized the cit-AuNPs with respect to aggregation. However, specific effects varied among the different NOM isolates. At pH = 6 in 80 mM KCl, low concentrations (<0.25 mg C per L) of large molecular weight Suwannee River Humic Acid (SRHA) was required to stabilize cit-AuNPs, while larger concentrations (>2 mg C per L) of smaller Suwannee River Fulvic Acid (SRFA) were necessary at the same ionic strength. Suwannee River NOM (SRNOM) which contains both SRHA and SRFA behaved in a manner intermediate between the two. Pony Lake Fulvic Acid (PLFA), an autochthonous NOM isolate, provided substantial stability at low concentrations, yet aggregation was induced at NOM concentrations > 2 mg C per L, a trend that is hypothesized to be the result of favourable hydrophobic interactions between coated particles induced at increased surface coverage. For all NOM isolates, it appears that NOM adsorption or conformational changes at the AuNP surfaces result in significant increases in the hydrodynamic diameter that aren't attributable to NP-NP aggregation.     

Persistence of repeated triadimefon application and its impact on soil microbial functional diversity

The effects of repeated applications of the fungicide triadimefon in agricultural soil on the microbial functional diversity of the soil and on the persistence of the fungicide in the soil were investigated under laboratory conditions. The degradation half-lives of triadimefon at the recommended dosage, simulated by a first-order kinetic model, were 23.90, 22.95, and 21.52 days for the first, second, and third applications, respectively. Throughout this study, no significant inhibition of the Shannon-Wiener index (H') was observed. However, the Simpson index (1/D) and the McIntosh index (U) were obviously reduced (p ≤ 0.05) during the initial 3 days after the first triadimefon application and thereafter, gradually recovered to or exceeded the level of the control soil. A similar trend in variation but with a faster recovery in the 1/D and U was observed after the second and third triadimefon applications, respectively. Taken together, the above results indicate that the repeated application of triadimefon enhanced the degradation rate of the fungicide and the recovery rate of the soil microbial functional diversity. It is concluded that repeated triadimefon applications in soil have a transient or temporary inhibitory effect on soil microbial communities.     

Bioaccumulation surveillance in Milford Haven Waterway

Biomonitoring of contaminants (metals, organotins, polyaromatic hydrocarbons (PAHs), PCBs) was undertaken in Milford Haven Waterway (MHW) and a reference site in the Tywi Estuary (St Ishmael/Ferryside) during 2007–2008. Bioindicator species encompassed various uptake routes—Fucus vesiculosus (dissolved contaminants); Littorina littorea (grazer); Mytilus edulis and Cerastoderma edule (suspension feeders); and Hediste (=Nereis) diversicolor (sediments). Differences in feeding and habitat preference have subtle implications for bioaccumulation trends though, with few exceptions, contaminant burdens in MHW were higher than the Tywi reference site, reflecting inputs. Elevated metal concentrations were observed at some MHW sites, whilst As and Se (molluscs and seaweed) were consistently at the higher end of the UK range. However, for most metals, distributions in MH biota were not exceptional. Several metal-species combinations indicated increases in bioavailability upstream, which may reflect the influence of geogenic/land-based sources—perhaps enhanced by lower salinity. TBT levels in MH mussels were below OSPAR toxicity thresholds and in the Tywi were close to zero. Phenyltins were not accumulated appreciably in M. edulis, whereas some H. diversicolor populations appear subjected to localized (historical) sources. PAHs in H. diversicolor were distributed evenly across most of MHW, although acenaphthene, fluoranthene, pyrene, benzo(a)anthracene and chrysene were highest at one site near the mouth; naphthalenes in H. diversicolor were enriched in the mid-upper Haven (a pattern seen in M. edulis for most PAHs). Whilst PAH (and PCB) concentrations in MH mussels were mostly above reference and OSPAR backgrounds, they are unlikely to exceed ecotoxicological thresholds. Bivalve Condition indices (CI) were highest at the Tywi reference site and at the seaward end of MH, decreasing upstream—giving rise to several significant (negative) relationships between CI and body burdens. Despite the possible influence of salinity gradient as a complicating factor, multivariate analysis indicated that a combination of contaminants could influence the pattern in condition (and the biomarkers metallothionein and TOSC). Integrating bioaccumulation data with biological and biochemical endpoints is seen as a useful way to discriminate environmental quality of moderately contaminated areas such as MHW and to prioritise cause and effect investigations.     

晚期垃圾渗滤液的部分亚硝化

利用实验室小试SBR在(33±1)℃的条件下,通过动态调控溶氧浓度(DO)(2～7 mg/L)和水力停留时间(2～5 d),经过130 d的运行成功启动了晚期垃圾渗滤液(NH4+-N含量1 227～2 133 mg/L)的部分亚硝化,使出水NO2--N∶NH4+-N稳定维持在1∶1左右,为后续的厌氧氨氧化工艺创造了进水条件。利用实时荧光定量PCR研究启动过程中的特异微生物氨氧化细菌的含量变化表明,氨氧化细菌的含量与NO2--N的生成速率和出水NO2--N稳定性有着显著相关性。     

On-line dechlorination–hydrogenation of chlorinated paraffin mixtures using GC and GC/MS

Chlorinated paraffins (CPs) are straight chain hydrocarbons that are produced as complex mixtures and are used as flame retardants and paint additives. These mixtures are extremely difficult to characterize using conventional chromatographic methods, as conventional gas chromatography results in unresolved complex chromatograms that preclude the identification and quantification of individual congeners or any reasonable assessment of the average carbon chain length. Carbon chain length is an important parameter for assessing physical properties and the toxicity of these materials. We have modified and improved a previously published gas chromatography–flame ionization detector method that uses Pd catalyst held in the gas chromatograph injector to simultaneously dechlorinate the CPs and separate the resulting alkanes. In addition, we have adapted this method to gas chromatography–mass spectrometry. Dehalogenation of other compounds was also studied with this system to investigate potential application to other complex halogenated mixtures.     

Hexabromocyclododecanes in surface sediments and a sediment core from Rivers and Harbor in the northern Chinese city of Tianjin

In the present study, hexabromocyclododecanes (HBCDs) were investigated in the sediment from Haihe River (HR), Dagu Dainage Canal (DDC) and Tianjin Harbor (TH) at Bohai Bay using a total of 51 samples of surface sediments and a sediment core collected from May to September in 2010, and its diastereomer- and enantiomer-specific profiles were analyzed. The concentration of total HBCDs were generally high, with mean value and ranges of 31.0 and 1.35–634 ng g^?1 dw, respectively. The contamination followed the order of TH > DDC > HR. Higher levels (up to 634 ng g^?1 dw) occurred in the lower reach of HR and DDC located in an industrial area of Tianjin. This is the first time to report so high concentration of HBCDs in sediment in Southeast Asia. The γ-diastereomer dominated in most samples (44 out of 51), and this is in agreement with the diastereomer distribution pattern in industrial products, while α-HBCD was the dominant diastereomer in the other seven samples. However, only few samples exhibited γ-diastereomer ratio similar to that (75–89%) in technical products, indicating the inter-transformation and variable degradation of the different isomers. The high ratio of γ-diastereomer could be used as an indicator for fresh contamination input. Enantiomeric factors (EFs) of HBCD isomers in most of the samples were statistically different from technical products (p < 0.05), showing a trend of more easily enrichment of the (?)-HBCD-enantiomer compared to the (+)-HBCD-enantiomer. The δ- and ε-diastereomers were frequently detected but at low level. The HBCDs in the sediment core showed several peaks, and the greatest value occurred in 2005, when a plastic manufacture plant using HBCD was set up nearby.     

Microwave enhanced advanced oxidation process for treating dairy manure at low pH

This study investigated the treatment of dairy manure using the microwave enhanced advanced oxidation process (MW-AOP) at pH 2. An experimental design was developed based on a statistical program using response surface methodology to explore the effects of temperature, hydrogen peroxide dosage and heating time on sugar production, nutrient release and solids destruction. Temperature, hydrogen peroxide dosage and acid concentration were key factors affecting reducing sugar production. The highest reducing sugar yield of 7.4% was obtained at 160°C, 0 mL, 15 min heating time, and no H(2)O(2) addition. Temperature was a dominant factor for an increase of soluble chemical oxygen demand (SCOD) in the treated dairy manure. The important factors for volatile fatty acids (VFA) production were microwave temperature and hydrogen peroxide dosage. Temperature was the most important parameter, and heating time, to a lesser extent affecting orthophosphate release. Heating time, hydrogen peroxide dosage and temperature were significant factors for ammonia release. There was a maximum of 96% and 196% increase in orthophosphate and ammonia concentration, respectively at 160°C, 0.5 mL H(2)O(2) and 15 min heating time. The MW-AOP is an effective method in dairy manure treatment for sugar production, nutrient solubilisation, and solids disintegration.