Nitrogen oxides emission control options for coal-fired electric utility boilers

Recent regulations have required reductions in emissions of nitrogen oxides (NOx) from electric utility boilers. To comply with these regulatory requirements, it is increasingly important to implement state-of-the-art NOx control technologies on coal-fired utility boilers. This paper reviews NOx control options for these boilers. It discusses the established commercial primary and secondary control technologies and examines what is being done to use them more effectively. Furthermore, the paper discusses recent developments in NOx controls. The popular primary control technologies in use in the United States are low-NOx burners and overfire air. Data reflect that average NOx reductions for specific primary controls have ranged from 35% to 63% from 1995 emissions levels. The secondary NOx control technologies applied on U.S. coal-fired utility boilers include reburning, selective noncatalytic reduction (SNCR), and selective catalytic reduction (SCR). Thirty-six U.S. coal-fired utility boilers have installed SNCR, and reported NOx reductions achieved at these applications ranged from 15% to 66%. Recently, SCR has been installed at >150 U.S. coal-fired utility boilers. Data on the performance of 20 SCR systems operating in the United States with low-NOx emissions reflect that in 2003, these units achieved NOx emission rates between 0.04 and 0.07 lb/10(6) Btu.     

Emissions of sulfur trioxide from coal-fired power plants

Emissions of sulfur trioxide (SO3) are a key component of plume opacity and acid deposition. Consequently, these emissions need to be low enough to not cause opacity violations and acid deposition. Generally, a small fraction of sulfur (S) in coal is converted to SO3 in coal-fired combustion devices such as electric utility boilers. The emissions of SO3 from such a boiler depend on coal S content, combustion conditions, flue gas characteristics, and air pollution devices being used. It is well known that the catalyst used in the selective catalytic reduction (SCR) technology for nitrogen oxides control oxidizes a small fraction of sulfur dioxide in the flue gas to SO3. The extent of this oxidation depends on the catalyst formulation and SCR operating conditions. Gas-phase SO3 and sulfuric acid, on being quenched in plant equipment (e.g., air preheater and wet scrubber), result in fine acidic mist, which can cause increased plume opacity and undesirable emissions. Recently, such effects have been observed at plants firing high-S coal and equipped with SCR systems and wet scrubbers. This paper investigates the factors that affect acidic mist production in coal-fired electric utility boilers and discusses approaches for mitigating emission of this mist.     

Thiotepa - a potential chemosterilant for spotted boll worm Eariasfabia Stoll (Lepidoptera: Noctuidae) III — Effect on eggs

Thiotepa induced inhibition of nucleic acids, protein and free amino acids during early embryogenesis of $\text{E}$. $\text{fabia}$ is reported. Same level of inhibition was found in DNA, RNA and protein in different crosses. In T♂ X T♀ there was significant weight loss of the eggs also. The inhibition and weight loss has been attributed to the mitotic failure of the developing embryos due to genetic imbalance.     

Statistical evaluation of the influence of flow conditions and sampling techniques on water quality data.

The purpose of this study is to statistically evaluate the influence of various sampling methodologies and flow conditions on the quality and comparability of total phosphorus concentration data collected over the course of 27 months at the South Florida Water Management District (SFWMD) S-65E structure. The data was obtained from the following sampling methodologies: U.S. Geological Survey (USGS) (Reston, Virginia) equal width increment spatially composite grab samples, USGS replicate samples, SFWMD grab samples, and SFWMD autosampler samples. Both significant and insignificant differences were reported from these comparisons. Parametric and nonparametric standard statistical tests for significance were carried out to evaluate the differences between the data. To avoid invalid conclusions of insignificant differences, we conducted tests for equivalence of the means and variances. The results from the data analysis revealed that both flow conditions and sampling methodology affected the water quality data.     

Reactive solute transport in macroscopically homogeneous porous media: analytical solutions for the temporal moments

In this work, we investigate one-dimensional solute transport affected by rate-limited sorption, first-order mass transfer, and first-order transformation. Analytical expressions are obtained for the temporal moments of the solute in the solution phase. The effect of various rate coefficients on the temporal moments is examined. It was found that, in the presence of transformation reactions, the mean arrival time, and the spread and skewness of the breakthrough curves, are not monotonic functions of the rate coefficients. These solutions will be useful as a preliminary analysis tool for ascertaining the relative importance of various processes under given conditions. They may also be used to analyze the accuracy of various numerical techniques used for simulation of reactive transport.     

Biochemical alterations in Bubalusbubalis after repeated exposures to quinalphos

Oral administration of 0.7 mg/kg/day of quinalphos to mals buffalo calves for 28 consecutive days produced marked inhibition of erythrocyte acetylcholinesterase and elevation in serum levels of aminotransferases and phosphatases without inducing apparent toxicity. The enzymic alterations were more pronounced following 1.4 and 2.1 mg/kg/day doses of quinalphos, which were lethal within 4–17 days.     

Study of Aging Characteristics of Ternary Blends of Polyethylenes—II

Six film samples of low-density polypropylene (LDPE)/linear LDPE (LLDPE)/high-density polypropylene (HDPE) with varying ratios of LDPE (20–45 ... wt%) and LLDPE (25–50 wt%) having a fixed amount of HDPE at 30 wt% were prepared by blown film extrusion technique. The samples were aged at four different temperatures, 55°, 70°, 85°, and 100°C, for four different time periods in the interval of between 150 hours and up to 600 hours. The change in the structure of various constituents and the formation of various oxygenated (peroxy and hydroperoxy) and unsaturated groups during thermo-oxidative degradation was discussed by infrared spectroscopy. The visiosity-average molecular weight was found to have decreased slowly in the initial aging hours and temperatures, whereas it decreased by 10% with its previous value tensile strength that is, 100°C when aged for 600 hours. The tensile strength of the sample first increased by 67% at 55°C and 89% at 70°C up to 450 hours, whereas the values increased by 52.5% at 85°C and 33.9% at 100°C when aged for 150 hours and then decreased. The percentage elongation at break increased by 2.7% at 55°C and 10.7% at 70°C for 150 and 300 hours of aging, respectively, whereas the percentage decreased when aged at 85°C and 100°C for up to 600 hours of aging. The values of gel content (percent) increased and initial degradation temperature decreased with aging time and temperature.     

Uptake and translocation of selenium by maize (Zea mays) from its environmentaly important forms

Pot culture studies were conducted to examine the effect of selenite (SeO3(2-)) and selenate (SeO4(2-)) on the uptake and translocation of root absorbed selenium in maize Zea mays plants grown in sand and soil culture. Increasing selenium supplementation (0.5-6.00 microg/ml), increased the selenium retention in roots, but there was little transfer of selenium from shoot to grains. The study indicates that selenite species (less mobile) also accumulates in maize plants when supplied in solution form. Selenium does not cause any adverse effect on the maize plants (dry matter yield vs concentration, no significant correlation, p>0.05).