Pollution characteristics of ambient volatile organic compounds (VOCs) in the southeast coastal cities of China

With the rapid urbanization, the southeast coastal cities of China are facing increasing air pollution in the past decades. Large emissions of VOCs from vehicles and petrochemical factories have contributed greatly to the local air quality deterioration. Investigating the pollution characteristics of VOCs is of great significance to the environmental risk assessment and air quality improvement. Ambient VOC samples were collected simultaneously from nine coastal cities of southeast China using the Tedlar bags, and were subsequently preprocessed and analyzed using a cryogenic preconcentrator and a gas chromatography–mass spectrometry system, respectively. VOC compositions, spatial distributions, seasonal variations and ozone formation potentials (OPFs) were discussed. Results showed that methylene chloride, toluene, isopropyl alcohol and n-hexane were most abundant species, and oxygenated compounds, aromatics and halogenated hydrocarbons were most abundant chemical classes (62.5–95.6 % of TVOCs). Both industrial and vehicular exhausts might contribute greatly to the VOC emissions. The VOC levels in the southeast coastal cities of China were sufficiently high (e.g., 6.5 μg?m^?3 for benzene) to pose a health risk to local people. A more serious pollution state was found in the southern cities of the study region, while higher VOC levels were usually observed in winter. The B/T ratio (0.26?±?0.09) was lower than the typical ratio (ca. 0.6) for roadside samples, while the B/E (1.6–7.6) and T/E (7.2–26.8) ratios were higher than other cities around the world, which indicated a unique emission profile in the study region. Besides, analysis on ozone formation potentials (OFPs) indicated that toluene was the most important species in ozone production with the accountabilities for total OFPs of 22.6 to 59.6 %.     

某钢厂烧结烟气脱硫系统滤袋失效原因分析

分析了聚苯硫醚自身特性,从而了解目前烧结烟气脱硫系统袋式除尘器中选择其作为滤料的原因。并就目前某钢厂烧结烟气脱硫系统实际发生的滤袋失效问题,通过扫描电镜、EDS能谱分析及烧失量实验对滤袋进行分析,发现材料中混入的玻璃纤维是造成其失效的主要原因,为今后实际工程中滤袋的选择提供依据,从而尽量减少不必要的损失,确保烟气脱硫项目的正常运行。     

脉冲电解法预处理酸性染料废水

研究了脉冲电解法预处理酸性偶氮类染料废水的处理效果,考察了不同工艺条件对废水COD去除率、脱色率和可生化性的影响。结果表明,脉冲电源峰值电压12 V,频率600 Hz,占空比50%的条件下电解40 min后,COD去除率可达59%,废水脱色率达91.4%,BOD5/COD由0.09提高至0.34。在相同条件下,脉冲电解法的电流效率是直流电解法的2倍左右。与现行常用的铁/碳反应床相比,脉冲电解法在成本上也具有一定的优势,应用前景较好。     

集中供热工程实施前后大气环境影响对比分析研究

采暖期的大气环境质量与供热方式息息相关,集中供热是提高我国环境空气质量的一种可行办法。以定西市临洮县集中供热项目为例,结合拟建项目的建设特点,利用环评软件——AERMOD预测模式分析实施集中供热工程前后以大气为主的环境影响的差异,用以说明集中供热工程的实施具有巨大的环境效益。分析表明:集中供热减少了SO2、NO X烟尘的排放量,对环境的改善将起到良好的作用。     

A-O工艺污泥疏水比率与污泥活性的关系

通过A-O工艺对印染废水的降解处理,研究了不同污泥活性下微生物疏水比率和COD去除率的变化规律.结果表明,污泥活性指标ATP浓度与微生物疏水性之间存在一定关系,并对COD去除率产生一定的影响.缺氧污泥的活性指标ATP浓度在0.38～0.77 mg/L范围时,污泥微生物的疏水性最好且疏水比率最高值为84％,COD的去除率最高,为70.01％；好氧污泥的活性指标ATP浓度在0.86～2.17 mg/L范围时,污泥微生物的疏水性最好,疏水比率最高值为75％,COD的去除率最高为96.2％.     

Using air quality modeling to study source–receptor relationships between nitrogen oxides emissions and ozone exposures over the United States

Human exposure to ambient ozone (O₃) has been linked to a variety of adverse health effects. The ozone level at a location is contributed by local production, regional transport, and background ozone. This study combines detailed emission inventory, air quality modeling, and census data to investigate the source–receptor relationships between nitrogen oxides (NO_x) emissions and population exposure to ambient O₃ in 48 states over the continental United States. By removing NO_x emissions from each state one at a time, we calculate the change in O₃ exposures by examining the difference between the base and the sensitivity simulations. Based on the 49 simulations, we construct state-level and census region-level source–receptor matrices describing the relationships among these states/regions. We find that, for 43 receptor states, cumulative NO_x emissions from upwind states contribute more to O₃ exposures than the state's own emissions. In-state emissions are responsible for less than 15% of O₃ exposures in 90% of U.S. states. A state's NO_x emissions can influence 2 to 40 downwind states by at least a 0.1 ppbv change in population-averaged O₃ exposure. The results suggest that the U.S. generally needs a regional strategy to effectively reduce O₃ exposures. But the current regional emission control program in the U.S. is a cap-and-trade program that assumes the marginal damage of every ton of NO_x is equal. In this study, the average O₃ exposures caused by one ton of NO_x emissions ranges from ? 2.0 to 2.3 ppm-people-hours depending on the state. The actual damage caused by one ton of NO_x emissions varies considerably over space.     

地下渗滤系统处理农村生活污水的研究

在天津武清区一村落构建了2个并行的地下渗滤系统,考察了其对农村生活污水的处理效果。该系统水力负荷为10 cm/d,处理能力为50 t/d。填充介质选用土壤、陶粒、炉渣和两种自然有机质,按5∶2∶2∶1的比例配置的人工土层。结果表明地下渗滤系统对污水中各种主要污染因子均有一定的去除效果,在进水COD和C/N较低的不利条件下,COD、总磷、氨氮、总氮、悬浮物均得到有效去除,出水中各项污染指标平均浓度均达到《城镇污水处理厂污染物排放标准》中的一级A标准;具体到不同的污染指标,添加了不同有机质的2个并行系统的处理效果也有所不同。总体上看,地下渗滤系统作为农村生活污水的处理设施有很好的应用前景。     

酸化油页岩灰吸附Ni(Ⅱ)的研究

采用质量分数为50%的HNO3制备酸化油页岩灰吸附剂,研究吸附时间、吸附温度、Ni(Ⅱ)初始浓度、溶液pH值、吸附剂投加量和吸附剂粒径对酸化油页岩灰吸附性能的影响.结果表明,一定范围内,酸化油页岩灰吸附剂的吸附量(Qe)随吸附温度、Ni(Ⅱ)初始浓度、溶液pH值、吸附剂投加量的增加而增加,随吸附剂粒径的增加而减小.吸附温度对吸附刺的最大吸附量Q有明显影响.当Ni(Ⅱ)初始质量浓度为100 mg/L,溶液pH值为6.0,吸附剂粒径为53～75μm,吸附剂投加量为16.0 g/L,吸附搅拌速度为400 r/min时,25℃、30℃、35℃下酸化油页岩灰的最大吸附量Q分别为17.0 mg/g、33.2mg/g、42.9mg/g,且吸附主要以离子交换的化学吸附方式为主.酸化油页岩灰吸附剂对Ni(Ⅱ)的吸附符合Languir等温吸附方程,温度为25℃、30℃、35℃,溶液pH值为6.0,油页岩灰吸附剂投加量为16.0 g/L,油页岩灰吸附剂粒径为53～75μm条件下,酸化油页岩灰对Ni(Ⅱ)的最大吸附量Q分别为17.0mg/g、33.2 mg/g、42.9 mg/g.研究表明,油页岩灰经过酸化改性后可作为吸附荆处理含Ni(Ⅱ)废水,具有较好的市场应用前景.     

烟气NO氧化催化剂Cu-V/Ti-PILCs的制备及其硫水稳定性

采用等体积浸渍法制备了以钛交联粘土为载体,Cu与V氧化物为活性组分的烟气NO氧化催化剂(Cu-v/Ti-PILCs),并考察了各种制备条件下催化剂的活性及稳定性.结果显示,当V水/V丙酮 =1∶2,负载4%CuO和2%V2O5,并在500℃煅烧时制得的Cu-V/Ti-PILCs催化剂,在NO浓度为350 mg/m3,O...     

CuCoOx/TiO2催化氧化NO性能研究

采用浸渍法制备了CuCoOx/TiO₂催化剂，考察了焙烧温度、反应温度、氧含量、NO浓度和空间速度对催化剂催化氧化NO性能的影响，并考察了催化剂的抗硫抗水性能。XRD、TPR和BET分析表明，350℃焙烧的催化剂具有CuCo₂O₄尖晶石结构，比表面积大，对NO的氧化效果好。在空速为5 000 h^-1，NO进口浓度500 mg/m³，含氧量10%的条件下，反应温度300℃时NO转化率可达79.5%，250℃时NO转化率接近50%。该催化剂具有良好的单独抗SO₂、抗H₂O毒化性能，H₂O和SO₂同时存在时很快失活。该催化剂可用于不同时含H₂O和SO₂的含NO气体催化氧化后再吸收处理。