Quantifying changes to historic fish habitat extent on north coast NSW floodplains,Australia

Global degradation of coastal ecosystems is influencing the provision of ecosystem services, including fisheries maintenance services. Degradation of the Australian coastal zone and its resources following European occupation has been recognised for some time. This includes the loss of ecologically important coastal wetlands, which have strong trophic and habitat links to fisheries. In NSW, structural flood mitigation works are a principle driver of the decline of coastal wetlands; however, little action has been taken to quantify the extent of decline due to limited information of the pre-European settlement extent of coastal wetlands. We use spatial data sets in GIS to quantify prime fish habitat and calculate the loss of fish habitat for the large coastal floodplains of northern NSW, which are significant contributors to the commercial and recreational fisheries of NSW. The technique is validated by comparison with early maps of wetland distribution. We identified pre-European distribution of available fish habitat of approximately 477,000 ha, of which 87,000 ha was identified as prime fish habitat. Approximately 62,000 ha of prime fish habitat was impacted by drainage of the coastal floodplains in association with flood mitigation works which intensified in the mid-1950s and were largely completed by 1971, equating to a loss of approximately 72 % of prime fish habitat. The declining value of the ecosystem services provided by prime fish habitat following drainage is likely to be substantial. Some actions have taken place to restore the functions of this habitat although significant opportunities remain to reverse this decline through management actions that restore natural drainage and reinstate tidal exchange. These actions become even more important as pressures on coastal wetlands increase with climate change and associated sea-level rise.     

Farmers’ nutrient management practices in indigenous cropping systems in southern Cameroon

With increasing population densities, food production needs to be increased. A common response of farmers is to shorten fallow periods, which can lead to a decline in crop yields, due to incomplete nutrient replenishment. However, whether farmers change their management of soil and nutrients according to the fallow length is not known. A survey was carried out in southern Cameroon in 1995 to establish factors determining farmers’ nutrient management practices (NMPs). Three classes of indigenous NMPs were identified: crop placement, mulching, and the use of inputs. Crop placement comprised intentional cultivation of certain crops in ash patches or near to tree trunks and stumps. Mulching was done with weeds and crop residues, on the soil surface next to crops or in planting holes. Crop placement was found in 88.8% of fields and mulching in 57.4%, while inputs were used in only 1.7%. Nutrient management seemed to be restricted to an optimal allocation of crops to nutrient sources in the field.Relationships were weak between the frequency of crop placement or mulching and indices of land or labor availability. Fallow length seems to be negatively correlated to crop placement at rotten trunks or stumps or in ash patches and positively to placement near recently felled trees. Crop placement and mulching of crop residues were used less often in simplified crop associations than in traditional intercrops. Nutrient inputs were mainly given to monocrops. Application of purchased inputs concentrated on commercial crops.Most respondents knew the advantages and risks of currently practiced methods, but often lacked information on the use of locally available internal inputs (refuse, kitchen ash, manure). Application of internal inputs was considered too labor demanding. The use of purchased inputs was limited by high prices. Soil fertility was in most cases not regarded as a problem.     

Landesweite immissionsbezogene Flechtenkartierung in Bayern

In 1996 within a country-wide research project, the epiphytic lichen vegetation throughout Bavaria was mapped according to Guideline VDI 3799, Part I (1995). The data providing information about air quality was collected in 190 sites. Most of the sites demonstrated little to moderate pollution, while both very high and very low levels of air pollution could be found locally. The methods outlined in Guideline VDI 3799 were slightly modified and adapted to the situation in Bavaria. Comparison of the lichen vegetation on different species of trees showed that a rigid classification of tree species as proposed in the guideline is not necessary in Bavaria. The use of several species of trees per site has proven to be favourable. The influence of the natural heterogeneity of the air-quality index in the investigated area was examined. Here, the geology turned out not to be a crucial factor. With respect to climate, it is especially the alpine region with its high levels of precipitation that stands out against the other parts of Bavaria. The results from that area may not be freely compared to those from the remaining sites. It could be shown that the Guideline VDI 3799 is applicable for large-area lichen mapping in Bavaria.     

Emission of biocides from treated materials test procedures for water and air

Methods for the determination of biocide emissions from treated materials into water and air were developed and tested in order to support a comparative ecological assessment of biocidal products. Leaching tests, experiments with simulated rain, extraction cleaning of carpets and emission chamber tests were performed with a series of treated materials. The experiments focused on the effect of changes in the procedure as well as characteristics of the specimens and demonstrate the suitability of the proposed methods for biocides of different product types. It was demonstrated that emissions of biocides into water can be compared on the basis of leaching tests in which the emission kinetics of the active ingredients are recorded. However, the water volume per surface area and the timetable for water changes have to be defined in such tests. Functions of flux rates related to time can be well described for inorganic compounds, whereas modelling of the data is more complicated for organic substances. Emission chamber tests using 20-litre and 23-litre glass exsiccators, originally developed to study volatile organic compounds, were successfully adapted for the investigation of the emission of biocides from treated materials which are usually semi volatile organic compounds. However test parameters and the method of analysis have to be adapted to the substances to be determined. Generally, it was found that the emission curves for the semi volatile organic compounds investigated differ from those of volatile organic compounds.     

Linking abundance and diversity of sponge-associated microbial communities to metabolic differences in host sponges

Many sponge species contain large and diverse communities of microorganisms. Some of these microbes are suggested to be in a mutualistic interaction with their host sponges, but there is little evidence to support these hypotheses. Stable nitrogen isotope ratios of sponges in the Key Largo, Florida (USA) area grouped sponges into species with relatively low δ¹⁵N ratios and species with relatively high δ¹⁵N ratios. Using samples collected in June 2002 from Three Sisters Reef and Conch Reef in the Key Largo, Florida area, transmission electron microscopy (TEM) and denaturing gradient gel electrophoresis were performed on tissues of the sponges Ircinia felix and Aplysina cauliformis, which are in the low δ¹⁵N group, and on tissue of the sponge Niphates erecta, which is in the high δ¹⁵N group. Results showed that I. felix and A. cauliformis have large and diverse microbial communities, while N. erecta has a low biomass of one bacterial strain. As the low δ¹⁵N ratios indicated a microbial input of nitrogen, these results suggested that I. felix and A. cauliformis were receiving nitrogen from their associated microbial community, while N. erecta was obtaining nitrogen solely from external sources. Sequence analysis of the microbial communities showed a diversity of metabolic capabilities among the microbes of the low δ¹⁵N group, which are lacking in the high δ¹⁵N group, further supporting metabolic differences between the two groups. This research provides support for hypotheses of mutualisms between sponges and their associated microbial communities.     

Untersuchung von Abfällen mit biologischen Testverfahren zur Bewertung der Wassergefährdung

Wastes from three different types of waste treatment facilities were examined with bioassays to determine their hazard potential to waters (→Part I). All examined wastes showed toxic effects and have to be classified as hazardous to waters according to section 19g of the German Federal Water Management Act. The toxicity is probably caused by heavy metals in the leachates, especially copper. An evaluation pattern to classify wastes in the German system of Water Hazard Classes is presented. According to this proposal, a classification of the examined wastes into Water Hazard Class 1 seems to be appropriate. This classification does not describe the hazards resulting from the regular disposal on a landfill or from the utilisation of the treated wastes.     

The influence of metabolically engineered glucosinolates profiles in Arabidopsis thaliana on Plutella xylostella preference and performance

The oviposition preference and larval performance of the diamondback moth (DBM), Plutella xylostella, was studied using Arabidopsis thaliana plants with modified glucosinolate (GS) profiles containing novel GSs as a result of the introduction of individual CYP79 genes. The insect parameters were determined in a series of bioassays. The GS content of the plants as well as the number of trichomes were measured. Multivariate analysis was used to determine the possible relationships among insect and plant variables. The novel GSs in the tested lines did not appear to have any unequivocal effect on the DBM. Instead, the plant characteristics that affected larval performance and larval preference did not influence oviposition preference. Trichomes did not affect oviposition, but influenced larval parameters negatively. Although the tested A. thaliana lines had earlier been shown to influence disease resistance, in this study no clear results were found for P. xylostella.     

Chromium Analysis at a Ferrochrome Smelter,a Chemical Plant and a Refractory Brick Plant

Techniques were developed to sample and analyze the Cr content of participate samples with emphasis on determining the concentration of the carcinogen Cr⁺⁶. Cr⁺⁶ is extracted to alkaline solution and analyzed colorimetrically. Residual particles are extracted with acid solution to remove soluble Cr⁺³, which is determined by atomic absorption spectrometry. This methodology was tested on samples from three diverse types of sources: a ferrochrome smelter, a chemical plant, and a refractory brick plant. Identical quadruplicate samples were collected to determine accuracy and precision of the collection and analysis procedures, and extraction of Cr⁺⁶ and Cr⁺³. A statistical analysis revealed that the precision of Cr⁺⁶ analysis is comparable to that of the particulate mass determination. The stability of Cr⁺⁶ In particulate form and in solution was determined. Size resolved particulate samples were collected to determine the particle size versus the Cr⁺⁶ content. At the ferrochrome smelter and the chemical plant the majority of the Cr⁺⁶ was contained in the respirable particles. The accuracy and completeness of the chemical methods employed were verified by neutron activation analysis, x-ray photoelectron spectroscopy, and scanning electron microscopyenergy dispersive x-ray analysis.