Feasibility of composting combinations of sewage sludge,olive mill waste and winery waste in a rotary drum reactor

Representative samples of the following biowastes typically generated in Castilla La Mancha (Spain) were composted using a pilot-scale closed rotary drum composting reactor provided with adequate control systems: waste from the olive oil industry (olive mill waste; OMW), winery–distillery waste containing basically grape stalk and exhausted grape marc (WDW), and domestic sewage sludge. Composting these biowastes was only successful when using a bulking agent or if sufficient porosity was supported. OMW waste composting was not possible, probably because of its negligible porosity, which likely caused anaerobic conditions. WDW was successfully composted using a mixture of solid wastes generated from the same winery. SS was also successfully composted, although its higher heavy metal content was a limitation. Co-composting was an adequate strategy because the improved mixture characteristics helped to maintain optimal operating conditions. By co-composting, the duration of the thermophilic period increased, the final maturity level improved and OMW was successfully composted. Using the proposed reactor, composting could be accelerated compared to classical outdoor techniques, enabling easy control of the process. Moisture could be easily controlled by wet air feeding and leachate recirculation. Inline outlet gas analysis helped to control aerobic conditions without excessive aeration. The temperature reached high values in a few days, and sufficient thermal requirements for pathogen removal were met. The correct combination of biowastes along with appropriate reactor design would allow composting as a management option for such abundant biowastes in this part of Spain.     

Spiking solvent, humidity and their impact on 2,4-D and 2,4-DCP extractability from high humic matter content soils

The 2,4-dichlorophenoxyacetic acid (2,4-D) is a hormone-like herbicide widely used in agriculture. Although its half life in soil is approximately two weeks, the thousands of tons introduced in the environment every year represent a risk for human health and the environment. Considering the toxic properties of this compound and its degradation products, it is important to assess and monitor the 2,4-D residues in agricultural soils. Furthermore, experiments of phyto/bioremediation are carried out to find economic and environmental friendly tools to restore the polluted soils. Accordingly, it is essential to accurately measure the amount of 2,4-D and its metabolites in soils. There is evidence that 2,4-D extraction from soil samples seriously depends on the physical and chemical properties of the soil, especially in those soils with high content of humic acids. The aim of this work was to assess the variables that influence the recovery and subsequent analysis of 2,4-D and its main metabolite (2,4-dichlorophenol) from those soils samples. The results showed that the recovery efficiency depends on the solvent and method used for the extraction, the amount and kind of solvent used for dissolving the herbicide and the soil water content at the moment of spiking. An optimized protocol for the extraction and quantification of 2,4-D and its main metabolite from soil samples is presented.     

Distribution of metals and trace elements in adult and juvenile penguins from the Antarctic Peninsula area

The presence of metals in the Antarctic environment is principally a natural phenomenon caused by geochemical characteristics of the region, although some anthropogenic activities can increase these natural levels. Antarctic penguins present several of the characteristics of useful sentinels of pollution in Antarctica such as they are long-lived species situated at the top of food web. The concentrations of Al, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Cd, and Pb were determined by inductively coupled plasma–mass spectrometry in samples of liver, kidney, muscle, bone, feather, and stomach contents of gentoo, chinstrap, and Adélie penguin (12 adults, five juveniles) from carcasses of naturally dead individuals collected opportunistically in the Antarctic Peninsula area. The obtained results showed that accumulation and magnification of several elements can be occurring, so that Cd and Se reached levels potentially toxic in some specimens. The presence of human activities seems to be increasing the presence of toxic metals such as Mn, Cr, Ni, or Pb in penguins.     

Environmental fate of glyphosate and aminomethylphosphonic acid in surface waters and soil of agricultural basins

Argentinian agricultural production is fundamentally based on a technological package that combines no-till and glyphosate in the cultivation of transgenic crops. Transgenic crops (soybean, maize and cotton) occupy 23 million hectares. This means that glyphosate is the most employed herbicide in the country, where 180–200 million liters are applied every year.     

Quantifying Reductions of Mass‐Failure Frequency and Sediment Loadings From Streambanks Using Toe Protection and Other Means: Lake Tahoe,United States1

Abstract: Streambank erosion by mass‐failure processes represents an important form of channel adjustment and a significant source of sediment in disturbed streams. Mass failures regularly occur by a combination of hydraulic processes that undercut bank toes and geotechnical processes that cause bank collapse by gravity. Little if any quantitative information is available on the effectiveness of bank treatments on reducing erosion. To evaluate potential reduction in sediment loadings emanating from streambanks, the hydraulic and geotechnical processes responsible for mass failure were simulated under existing and mitigated conditions using a Bank‐Stability and Toe‐Erosion Model (BSTEM). Two critical erosion sites were selected from each of the three watersheds known to contribute the greatest amounts of fine sediment by streambank processes in the Lake Tahoe Basin. A typical high‐flow annual hydrograph was selected for analysis. Bank‐material strength data were collected for each layer as were species‐specific root‐reinforcement values. The effects of the first flow event on bank‐toe erosion were simulated using an excess shear‐stress approach. The resulting geometry was then exported into the bank‐stability submodel to test for the relative stability of the bank under peak flow and drawdown conditions. In this way, BSTEM was used iteratively for all flow events for both existing and mitigated conditions. On average, 13.6% of the material was eroded by hydraulic shear, the remainder by mass failures, which occurred about five times over the simulation period. Simulations with 1.0 m‐high rock‐toe protection showed a dramatic reduction in streambank erosion (69‐100%). Failure frequency for the simulation period was reduced in most cases to a single episode. Thus, an almost 90% reduction in streambank loadings was achieved by virtually eliminating the erosion of only 14% of the material that was entrained by hydraulic forces. Consequently, simulations show average load reductions of about an order of magnitude. Results stress the critical importance of protecting the bank toe‐region from steepening by hydraulic forces that would otherwise entrain previously failed and in situ bank materials, thereby allowing the upper bank to flatten (by failure) to a stable slope.     

Environmental Indicators of Biofuel Sustainability: What About Context?

Indicators of the environmental sustainability of biofuel production, distribution, and use should be selected, measured, and interpreted with respect to the context in which they are used. The context of a sustainability assessment includes the purpose, the particular biofuel production and distribution system, policy conditions, stakeholder values, location, temporal influences, spatial scale, baselines, and reference scenarios. We recommend that biofuel sustainability questions be formulated with respect to the context, that appropriate indicators of environmental sustainability be developed or selected from more generic suites, and that decision makers consider context in ascribing meaning to indicators. In addition, considerations such as technical objectives, varying values and perspectives of stakeholder groups, indicator cost, and availability and reliability of data need to be understood and considered. Sustainability indicators for biofuels are most useful if adequate historical data are available, information can be collected at appropriate spatial and temporal scales, organizations are committed to use indicator information in the decision-making process, and indicators can effectively guide behavior toward more sustainable practices.     

Reducing the negative impact of ceftriaxone and doxycycline in aqueous solutions using ferrihydrite/plant-based composites: mechanism pathway

Environmental Science and Pollution Research - The adsorption of ceftriaxone (CET) and doxycycline (DOX) from aqueous solution using ferrihydrite/plant-based composites (silica rice husk) to reduce...     

Estimating net benefits of recreation under conditions of excess demand

The public provision of outdoor recreation necessitates the development of nonmarket measures of the value of resources in recreational use. Such values can be used as surrogates for market values in the decision-making process. Another aspect of recreation as a publicly provided good is the absence of a mechanism to eliminate automatically excess demand. The absence of such a mechanism has resulted in conditions of excess demand at many recreation sites.This paper deduces the implications of excess demand for the travel cost method of benefit estimation. We show that when excess demand results in rationing at a particular site, the travel cost method will underestimate the true benefits of the site. The results are important because they help identify the direction of bias of one measure of the benefits from the use of a natural resource.