Synthesis and characterization of agricultural controllable humic acid superabsorbent

Humic acid superabsorbent polymer (P(AA/AM-HA)) and superabsorbent polymer (P(AA/AM)) were synthesized by aqueous solution polymerization method using acrylic acid (AA), acrylamide (AM) and humic acid (HA) as raw material. The effects of N,N'-methylenebisacrylamide (MBA) crosslinking agent, potassium peroxydisulfate (KPS) initiator, reaction temperature, HA content, ratio of AA to AM, concentration of monomer and neutralization of AA on water absorption were investigated. Absorption and desorption ratios of nitrogen fertilizer and phosphate fertilizer were also investigated by determination of absorption and desorption ratio of NH₄⁺, PO₄^3- on P(AA/AM-HA) and P(AA/AM). The P(AA/AM-HA) and P(AA/AM) were characterized by Fourier translation infrared spectroscopy, biological photomicroscope and scanning electron microscopy (SEM). The optimal conditions obtained were as follows: the weight ratio of MBA to AA and AM was 0.003; the weight ratio of KPS to AA and AM was 0.008; the weight ratio of HA to AA was 0.1; the mole ratio of AM to AA is 0.1; the mole ratio of NaOH to AA is 0.9; the reaction temperature was 60℃. P(AA/AMHA) synthesized under optimal conditions, has a good saline tolerance, its water absorbency in distilled water and 0.9 wt.% saline solution is 1180 g/g and 110 g/g, respectively. P(AA/AM-HA) achieves half saturation in 6.5 min. P(AA/AM-HA) is superior to P(AA/AM) on absorption of NH₄⁺, PO₄^3-. The SEM micrograph of P(AA/AM-HA) shows a fine alveolate structure. The biological optical microscope micrograph of P(AA/AM-HA) shows a network structure. Graft polymerization between P(AA/AM) and HA was demonstrated by infrared spectrum. The P(AA/AM-HA) superabsorbent has better absorbing ability of water and fertilizer, electrolytic tolerance and fewer cost than P(AA/AM) superabsorbent.     

Characterization of typical taste and odor compounds formed by Microcystis aeruginosa

Production and characteristics of typical taste and odor (T&O) compounds by Microcystis aeruginosa were investigated. A few terpenoid chemicals, including 2-MIB, β-cyclocitral, and β-ionone, and a few sulfur compounds, such as dimethyl sulfide and dimethyl trisulfide, were detected. β-Cyclocitral and β-carotene concentrations were observed to be relevant to the growth phases of Microcystis. During the stable growth phase, 41-865 fg/cell of β-cyclocitral were found in the laboratory culture. β-Cyclocitral concentrations correlated closely with β-carotene concentrations, with the correlation coefficient R2 = 0.96, as it is formed from the cleavage reaction of β-carotene. For dead cell cases, a high concentration of dimethyl trisulfide was detected at 3.48-6.37 fg/cell. Four T&O compounds, including β-cyclocitral, β-ionone, heptanal and dimethyl trisulfide, were tested and found to be able to inhibit and damage Microcystis cells to varying degrees. Among these chemicals, β-cyclocitral has the strongest ability to quickly rupture cells.     

Formation of THMs and HANs during bromination of Microcystis aeruginosa

Bromine-contained disinfectants and biocides are widely used in swimming pools, recreational waters and cooling towers. The objective of this study was to evaluate the formation of thrihalomethanes (THMs) and haloacetonitriles (HANs) and their cytotoxicity in algae solutions during free bromine disinfection. Disinfection by-products formation potential experiments were conducted using model solutions containing 7 mg/L (as total organic carbon) Microcystis aeruginosa cells. Effects of free bromine dosage, pH and ammonia were investigated. The results showed that brominated disinfection by-products were the major products when free bromine was applied. The total THMs formed during bromination was much as that formed during chlorination, whereas HANs were elevated by using bromination instead of chlorination. Dibromoacetonitrice (C2H2NBr2 ) and bromoform (CHBr3 ) were the only detected species during free bromine disinfection. The production of C2H2NBr2 and CHBr 3 increased with disinfectant dosage but decreased with dosing ammonia. CHBr3 increased with the pH changing from 5 to 9. However, C2H2NBr2 achieved the highest production at neutral pH, which was due to a joint effect of variation in hydrolysis rate and free bromine reactivity. The hydrolysis of C2H2NBr2 was base-catalytic and nearly unaffected by disinfectant. Finally, estimation of cytotoxicity of the disinfected algae solutions showed that HANs formation was responsible for the majority of toxicity. Considering its highest toxicity among the measured disinfection by-products, the elevated C2H2NBr2 should be considered when using bromine-related algaecide.     

城市新区污水收集系统的建设和管理

城市新区开发的过程中,污水收集系统往往是容易被忽视的部分,因此会带来新的水体污染问题。本文针对城市新区开发中污水收集系统容易出现的问题,从规划、建设和管理三方面进行了研究和分析,并对城市新区污水收集系统建设和管理提出了建议。     

模糊综合评判在崩塌预测中的应用

本文用模糊数学理论建立了崩塌易发性预测模型,模型中通过对崩塌影响因素的分析,选取8种因素作为预测因子,4个等级作为评价集,并引入k次抛物型模糊分布作为隶属函数。之后采用层次分析法求出权重,使用matlab软件检验权重的一致性并计算结果向量,从而实现对崩塌发育影响因素严重性等级综合评判。实例表明:模糊综合评价方法可操作性强、效果较好,可在一般崩塌发育影响因素分析评价中广泛应用。     

润滑油新加坡项目HSE管理探索

以润滑油新加坡项目HSE管理为研究对象,分析了新加坡HSE管理和国内HSE管理的不同点,确定了润滑油新加坡项目HSE管理存在难题,按照全过程、全方位、系统控制理论,提出了润滑油新加坡项目HSE管理具体措施。     

祁东经济开发区生态化建设规划研究

工业园生态化建设是发展循环经济走新型工业化道路的重要途径,生态工业园是我国继经济技术开发区、高新技术开发区之后第三代工业园区发展的必然趋势。本文从祁东经济开发区的内部资源和外部环境出发,对其发展生态工业园具备的优势与劣势、面临的机遇与威胁进行了系统分析,并对其建设生态工业园的模式和实施层次进行了探讨,同时提出了相应的保障措施,以利于祁东经开区的可持续发展。     

自由基对工业化纤废水氧化处理的研究

通过芬顿试剂氧化、次氯酸钠氧化、过氧化氢和光催化氧化方法对化纤废水进行了处理,并通过COD检测、紫外可见光光度计等方法对氧化效果进行分析。结果显示自由基氧化对化纤废水的色度减小非常明显,能使其色度从800多倍减少到10倍以下,COD值从3 550 mg/L降解到100 mg/L以下,透光率的变化率达到98.59%。化学处理工艺的探讨发现在pH值4～6,搅拌速度为1 500 r/min,处理30 min就能使废水的COD去除率达到95.67%;pH为4时过氧化氢的氧化效果最佳。利用过氧化氢和次氯酸钠的氧化获得了自由基氧化处理此类废水的基本原理,即自由基氧化和链式反应的持续发生造成了有机物的降解,少量自由基的生成某种程度上刺激了高级氧化反应的深入,同时极少量自由基的交联可能会湮灭氧化反应,不同类自由基之间形成竞争,可能影响其氧化性能的发挥,因此需要通过控制反应物的种类、用量和有效分离反应中间产物,可以达到高级氧化反应处理此种废水的最佳效果。     

河南省产业结构演化及其生态环境效应分析

文章分析了河南省产业发展轨迹以及不同产业发展对生态环境的影响,利用不同产业的生态环境影响指数计算了1980年以来该省产业结构演化的生态环境效应,得出河南省产业转型轨迹与产业转型引起的生态环境效应轨迹在变化趋势上存在着一致性、产业转型对生态环境的影响滞后于产业转型等结论,并提出一些基于生态环境保护的河南省经济持续发展的长效产业政策。     

高锰酸钾强化PAC混凝处理温瑞塘河黑臭水体试验研究

以浙江省温州市温瑞塘河某河段黑臭地表水为研究对象,考察高锰酸钾强化PAC混凝工艺的除污效能,获得处理温瑞塘河黑臭水体的最佳工艺条件,为恢复河流水体生态自净功能提供基础。试验结果表明,高锰酸钾的最优投加方式为在混凝剂PAC前投加,最佳预氧化时间5 min,最佳投加量1.5 mg/L。将本实验得出的最优混凝处理条件应用于温瑞塘河实际黑臭水体的处理时发现,处理后水质明显改善,此表明高锰酸钾强化混凝应急处理温瑞塘河黑臭水体是切实可行的,可为实际的应急处理工艺提供了理论依据和技术指导。