The invasion of water hyacinth (Eichhornia crassipes) has resulted in enormous ecological and economic consequences worldwide. Although the spread of this weed in Africa, Australia,
and North America has been well documented, its invasion in China is yet to be fully documented. Here we report that since
its introduction about seven decades ago, water hyacinth has infested many water bodies across almost half of China’s territory,
causing a decline of native biodiversity, alteration of ecosystem services, deterioration of aquatic environments, and spread
of diseases affecting human health. Water hyacinth infestations have also led to enormous economic losses in China by impeding
water flows, paralyzing navigation, and damaging irrigation and hydroelectricity facilities. To effectively control the rampage
of water hyacinth in China, we propose a sustainability science-based management framework that explicitly incorporates principles
from landscape ecology and Integrated Pest Management. This framework emphasizes multiple-scale long-term monitoring and research,
integration among different control techniques, combination of control with utilization, and landscape-level adaptive management.
Sustainability science represents a new, transdisciplinary paradigm that integrates scientific research, technological innovation,
and socioeconomic development of particular regions. Our proposed management framework is aimed to broaden the currently dominant
biological control-centered view in China and to illustrate how sustainability science can be used to guide the research and
management of water hyacinth. 相似文献
The Models-3 Community Multiscale Air Quality (CMAQ) Modeling System and the Particulate Matter Comprehensive Air Quality Model with extensions (PMCAMx) were applied to simulate the period June 29-July 10, 1999, of the Southern Oxidants Study episode with two nested horizontal grid sizes: a coarse resolution of 32 km and a fine resolution of 8 km. The predicted spatial variations of ozone (O3), particulate matter with an aerodynamic diameter less than or equal to 2.5 microm (PM2.5), and particulate matter with an aerodynamic diameter less than or equal to 10 microm (PM10) by both models are similar in rural areas but differ from one another significantly over some urban/suburban areas in the eastern and southern United States, where PMCAMx tends to predict higher values of O3 and PM than CMAQ. Both models tend to predict O3 values that are higher than those observed. For observed O3 values above 60 ppb, O3 performance meets the U.S. Environmental Protection Agency's criteria for CMAQ with both grids and for PMCAMx with the fine grid only. It becomes unsatisfactory for PMCAMx and marginally satisfactory for CMAQ for observed O3 values above 40 ppb. Both models predict similar amounts of sulfate (SO4(2-)) and organic matter, and both predict SO4(2-) to be the largest contributor to PM2.5. PMCAMx generally predicts higher amounts of ammonium (NH4+), nitrate (NO3-), and black carbon (BC) than does CMAQ. PM performance for CMAQ is generally consistent with that of other PM models, whereas PMCAMx predicts higher concentrations of NO3-, NH4+, and BC than observed, which degrades its performance. For PM10 and PM2.5 predictions over the southeastern U.S. domain, the ranges of mean normalized gross errors (MNGEs) and mean normalized bias are 37-43% and -33-4% for CMAQ and 50-59% and 7-30% for PMCAMx. Both models predict the largest MNGEs for NO3- (98-104% for CMAQ 138-338% for PMCAMx). The inaccurate NO3- predictions by both models may be caused by the inaccuracies in the ammonia emission inventory and the uncertainties in the gas/particle partitioning under some conditions. In addition to these uncertainties, the significant PM overpredictions by PMCAMx may be attributed to the lack of wet removal for PM and a likely underprediction in the vertical mixing during the daytime. 相似文献
A glasshouse pot experiment was conducted to investigate Cd concentrations in the aboveground parts of two consecutive crops of rice and Cd availability in three different soils (loam, silt loam, and sandy loam) after application of pig manure with added Cd. Soil pH tended to increase with increasing application rate of pig manure from 1 to 3% (w/w, oven dry basis). Soil diethylene triamine pentaacetic acid (DTPA) extractable Cd showed a clear positive correlation with soil total Cd content and increased with increasing Cd amendment of the manure but showed no difference between the two manure application rates. Cd concentrations in the grain, husk, and straw were significantly and positively correlated with soil DTPA-extractable Cd (p < 0.001). Within each level of manure Cd, the higher rate (3%) of manure produced lower Cd concentrations in the grain, husk, and straw on all three soils than did the lower rate (1%) after the first crop, but this no longer occurred after the growth of the second crop. Grain Cd concentrations exceeded the Chinese National Food Quality Standard (0.2 mg kg(-1)) most often on the loam, with intermediate frequency on the silt loam, and least often on the sandy loam, the soil with the highest pH and lowest organic carbon content and cation exchange capacity. 相似文献
Environmental Science and Pollution Research - Continuously improving freshwater aquaculture efficiency will promote the sustainable development of freshwater aquaculture, which is crucial to... 相似文献
Environmental Science and Pollution Research - As the major energy consumers, energy-intensive industries are the key players in achieving carbon emission reduction targets. The paper builds a... 相似文献
Environmental Science and Pollution Research - Many parts of the vehicle cabin generate volatile organic compounds (VOCs), and some are hazardous and/or odorous to humans. In this study, VOCs in... 相似文献
Environmental Science and Pollution Research - Under the background that China puts forth the goals of “Emission Peak” and “Carbon Neutrality”, heavily polluting... 相似文献
Environmental Science and Pollution Research - To better understand the cardiopulmonary alterations associated with personal exposed PM2.5-bound heavy meals, we conducted a cross-sectional study in... 相似文献
The content of fine sand (< 200 μm) in primary sludge is relatively high in Chongqing sewage treatment plant owing to the part of rainwater will be mixed with sand and discharged into the municipal pipe network. Due to the insufficient separation of the sand, different obstacles to subsequent treatment processes may increase equipment wear, reduce effective volume of the tank, or shorten the cleaning cycle. There is a common use of grit chamber for the separation. Nevertheless, the use of hydrocyclone shows an outstanding performance in cost effectiveness and ease operation. The primary sludge in a sewage plant in Chongqing was monitored, and the average concentration of total suspend solids (TSS), total sand content, and volatile suspended solid (VSS) were 40.25 g/L, 17.51 g/L, and 13.41 g/L, respectively. The size of sand in the sludge was small, and the sand below 30 μm accounted for about 70% of the total sand. It formed flocs with organic matter and was removed in subsequent process units. While the size between 30–200 μm, called fine sand, was the main separation object, accounted for about 28.5%. According to XRF and XRD analysis, the sludge composition was mainly composed of quartz (SiO2), plagioclase (Na(AlSi3O8)), and calcite (CaCO3), which were similar to the main mineral composition of surface sediments and mountain rocks in the main urban area of Chongqing. A single-factor experiment on two types (FX100 and FX50) of hydrocylones was conducted to determine their abilities concerning the separation of fine sand and enrichment of organic matters from primary sludge. FX100 and FX50 showed best performance in the case of P = 0.17 Mpa, underflow diameter (Du) = 18 mm and P = 0.20 Mpa, Du = 6 mm, respectively. The removal efficiency of fine sand by hydrocyclone FX50 was 71.39%. While, it had poor performance on organic matter enrichment and the removal efficiency of which was 17.38%. By contrast, the removal rate by FX100 reached 61.89% for fine sand and only 6.89% for organic matters detached. The superimposition effect did not appear in the serial experiments on hydrocylone FX100 and FX50, but the power is 3.5 times of that of single-stage hydrocylone FX100. Comprehensive consideration of the processing capacity per unit time and operating power, the hydrocylone FX100 was more suitable for actual operation.