Atmospheric mercury emissions from waste combustions measured by continuous monitoring devices

Atmospheric mercury emissions have attracted great attention owing to adverse impact of mercury on human health and the ecosystem. Although waste combustion is one of major anthropogenic sources, estimated emission might have large uncertainty due to great heterogeneity of wastes. This study investigated atmospheric emissions of speciated mercury from the combustions of municipal solid wastes (MSW), sewage treatment sludge (STS), STS with waste plastics, industrial waste mixtures (IWM), waste plastics from construction demolition, and woody wastes using continuous monitoring devices. Reactive gaseous mercury was the major form at the inlet side of air pollution control devices in all combustion cases. Its concentration was 2.0-70.6 times larger than elemental mercury concentration. In particular, MSW, STS, and IWM combustions emitted higher concentration of reactive gaseous mercury. Concentrations of both gaseous mercury species varied greatly for all waste combustions excluding woody waste. Variation coefficients of measured data were nearly equal to or more than 1.0. Emission factors of gaseous elemental mercury, reactive gaseous mercury, and total mercury were calculated using continuous monitoring data. Total mercury emission factors are 0.30 g-Hg/Mg for MSW combustion, 0.21 g-Hg/Mg for STS combustion, 0.077 g-Hg/Mg for STS with waste plastics, 0.724 g-Hg/Mg for industrial waste mixtures, 0.028 g-Hg/Mg for waste plastic combustion, and 0.0026 g-Hg/Mg for woody waste combustion. All emission factors evaluated in this study were comparable or lower than other reported data. Emission inventory using old emission factors likely causes an overestimation.     

A numerical study on the seasonal variability of polychlorinated biphenyls from the atmosphere in the East China Sea

A three-dimensional/high-resolution transport model for persistent organic pollutants (POPs) has been developed for the East China Sea (ECS). The POPs model has four compartments (gaseous, dissolved, phytoplankton-bound, and detritus-bound phases) and includes processes for diffusive air-water exchange, phytoplankton uptake/depuration to POPs, decomposition of dissolved phase, vertical sinking of phytoplankton, detritus production by phytoplankton mortality, and vertical sinking and decomposition of detritus. The POPs model is coupled with an ocean circulation model that can reproduce the seasonal variation in physical variables to represent the advection and diffusion of POPs. We applied the POPs model to the polychlorinated biphenyl congener 153 (PCB 153) from the atmosphere and examined the behavior of PCB 153 in the ocean. The model showed a remarkable seasonal variability of PCB 153. Concentrations in the dissolved and particulate phases are high in winter (January-March) and low in summer (July-September). In coastal regions, where chlorophyll a concentration is high, horizontal and vertical distributions in the dissolved and particulate PCB 153 concentrations are strongly affected by phytoplankton uptake. The sensitivity experiments on the dynamics of PCB 153 suggested that a change of Henry’s law constant associated with water temperature is the major factor controlling the seasonal variability of PCB 153. The model-based yearly mass balance of PCB 153 in the ECS indicated that most of the atmospheric input (35.5 kg year⁻¹) is removed by the horizontal advection outside the ECS (19.0 kg year⁻¹) and accumulates to the sea bottom by vertical sinking (15.7 kg year⁻¹). For comparison with PCB 153, we also conducted simulations for PCB 52, 101, and 180. The seasonal variations are similar to that of PCB 153. The mass balance of PCB 52 that has short half-life time and less hydrophobic property shows the different results compared with PCB 101, 153, and 180.     

Seasonal variations of water column nutrients in the inner area of Ariake Bay, Japan: the role of muddy sediments

To investigate seasonal variations of nutrient distribution in the mudflat–shallow water system, we conducted field surveys once a month from August 2007 to July 2008 in the inner area of Ariake Bay (IAB), Japan. The NH₄ ⁺–N concentration of the water column increased in autumn because of the high NH₄ ⁺ release from the sediments, ranging from 850 to 3,001 μmol?m^?2?day^?1. The NO₃ ^?–N concentration was maximal in January, which was thought to be caused by NO₃ ^? release from the oxic sediments and by NO₃ ^? regeneration due to water column nitrification. The PO₄ ^3?–P concentration of the water column was high in summer–autumn due to the high PO₄ ^3? release from the reduced sediments, ranging from 22 to 164 μmol?m^?2?day^?1. We estimated the total amounts of DIN and PO₄ ^3?–P release (R _DIN and $ {R_{{\mathrm{P}{{\mathrm{O}}_4}}}} $ , respectively) from the muddy sediment area of the IAB. In summer–autumn, R _DIN and $ {R_{{\mathrm{P}{{\mathrm{O}}_4}}}} $ corresponded to about 47.7 % of DIN input and about 116.6 % of PO₄ ^3?–P input from the river, respectively. Thus, we concluded that the muddy sediments were an important source of nutrients for the water column of the IAB during summer–autumn. In addition, we found that phosphorus necessary for the growth of Porphyra (Porphyra yezoensis, Rhodophyceae) would be insufficient in the water column when phosphorus during the Porphyra aquaculture period is supplied only from the river. Therefore, the phosphorus release from the muddy sediments was thought to play an important role in the sustainable production of Porphyra in Ariake Bay.     

Development of a dynamic transfer model of (14)C from the atmosphere to rice plants

A dynamic compartment model was investigated to describe ¹⁴C accumulation in rice plants exposed to atmospheric ¹⁴C with temporally changing concentrations. In the model, rice plants were regarded to consist of three compartments: the ear and the mobile and immobile carbon pools of the shoot. Photosynthetically fixed carbon moves into the ear and the mobile carbon pool, and these two compartments release a part of this carbon into the atmosphere by respiration. Carbon accumulated in the mobile carbon pool is redistributed to the ear, while carbon transferred into the immobile carbon pool from the mobile one is accumulated there until harvest. The model was examined by cultivation experiments using the stable isotope, ¹³C, in which the ratios of carbon photosynthetically fixed at nine times during plant growth to the total carbon at the time of harvest were determined. The model estimates of the ratios were in relatively good agreement with the experimental observations, which implies that the newly developed compartment model is applicable to estimate properly the radiation dose to the neighboring population due to an accidental release of ¹⁴C from nuclear facilities.     

Adsorptive reduction of water hardness by a highly porous and regenerative geopolymer fabricated from coal fly ash waste with low-temperature calcination

Environmental Science and Pollution Research - In this research paper, potassium-activated geopolymer cubes (GeoC) fabricated from waste coal fly ash with low-temperature calcination were...     

固相萃取/气相色谱质谱法测定灰尘中的氯代多环芳烃

建立了固相萃取(SPE)/气相色谱质谱(GC/MS)联用检测灰尘中氯代多环芳烃(ClPAHs)的方法.以正己烷和二氯甲烷混合液为提取溶剂,索氏提取灰尘样品中的20种ClPAHs,活性硅胶层析柱与活性炭混合硅胶SPE柱协同净化.净化后的提取液采用GC/MS测定,SIM模式扫描,并用质谱特征离子定量分析.结果表明,填充量为0.2 g(W(活性炭)∶W(硅胶)=1∶40)的活性炭混合硅胶SPE小柱能有效地将ClPAHs分离出来,载样后采用反向溶剂洗脱,既提高了回收率又减少了洗脱剂甲苯的用量,净化效果好.处理灰尘样品后检测分析,20种ClPAHs的平均回收率稳定在60.4%—120.1%,相关系数>0.99,检出限为0.04—0.17 ng.g-1,相对标准偏差为1.6%—10.2%.本方法前处理简单,定性、定量准确可靠,可广泛应用于环境介质中氯代多环芳烃的检测.     

Characterization of chlorine and heavy metals for the potential recycling of bottom ash from municipal solid waste incinerators as cement additives

Bottom ash is an inevitable by-product from municipal solid waste (MSW) incineration plants. Recycling it as additives for cement production is a promising disposal method. However, the heavy metals and chlorine are the main limiting factors because of the potential environmental risks and corrosion of cement kilns. Therefore, investigating heavy metal and chlorine characteristics of bottom ash is the significant prerequisite of its reuse in cement industries. In this study, a correlative analysis was conducted to evaluate the effect of the MSW components and collection mode on the heavy metal and chlorine characteristics in bottom ash. The chemical speciation of insoluble chlorine was also investigated by synchrotron X-ray diffraction analysis. The results showed that industrial waste was the main source of heavy metals, especially Cr and Pb, in bottom ash. The higher contents of plastics and kitchen waste lead to the higher chlorine level (0.6 wt.%–0.7 wt.%) of the bottom ash. The insoluble chlorine in the MSW incineration bottom ash existed primarily as AlOCl, which was produced under the high temperature (1250°C) in incinerators.

Open image in new window

     

Organochlorine and organotin compounds in Caspian seals (Phoca caspica) collected during an unusual mortality event in the Caspian Sea in 2000

Polychlorinated biphenyls (PCBs), organochlorine pesticides and organotin compounds were determined in the blubber and liver of Caspian seals (Phoca caspica) found stranded on the coast of the Caspian Sea during an outbreak of canine distemper virus (CDV) in 2000. Among organochlorines analyzed, DDTs were the most dominant contaminants with concentrations ranging from 6.3 to 470 microg/g on a lipid-weight basis. Caspian seals collected in 2000 during the epizootic had higher concentrations of organochlorines than healthy individuals sampled in 1998. However, the blubber layer was generally thinner in the seals collected in 2000 than those in the previous surveys. Although compositions of organochlorine pesticides in seals suggested that the contamination status in the Caspian Sea is improving, the levels found in Caspian seals in 2000 were comparable to those in other marine mammals that have suffered from epizootics. This implies that the present status of contamination found in Caspian seals poses a risk of immunosuppression. Concentrations of butyltin compounds in livers of seals ranged from 0.49 to 17 ng/g on a wet-weight basis and octyltin compounds were below limit of detection in all the samples analyzed, suggesting less contamination by organotin compounds in the Caspian Sea.     

Electrolytic aminated carbon materials for the electrocatalytic redox reactions of inorganic and organic compounds

Some kinds of amine groups can be introduced to the glassy carbon surface by the electrode oxidation of the carbon electrode surface in ammonium carbamate solution, and this amine groups modified electrode is named as an aminated glassy carbon electrode. The existences of not only primary amine but also secondary and tertially amines were confirmed by X ray photoelectron spectroscopy. The applications of the aminated carbon material for the electrocatalytic reductions of oxygen, hydrogen peroxide, and organic compounds such as quinones were carried out, and the effects of amination on the formation of electrocatalytic sites for many species were revealed. The electrocatalyzed cyclic voltammograms of metal ions and metal chelate compounds obtained by aminated glassy carbon electrodes are also discussed. Moreover, we intend to describe that the aminated carbon electrode can exhibit the large reduction waves of inorganic oxoacids such as N0₂? or bromide ion. The introduced functional groups containing nitrogen atom can change the distribution of the electron densities of the graphite carbon surface, and this specific electron distribution environment may generate the various electrocatalytic activities.