Treatment of fluoride-contaminated water. A review

Environmental Chemistry Letters - Delivering the right amount of fluoride to drinking water protects the teeth from decay and reduces the risk of cavities. Nonetheless, fluorosis has been...     

Transfer of Graphene CVD to Surface of Low Density Polyethylene (LDPE) and Poly(butylene adipate-co-terephthalate) (PBAT) Films: Effect on Biodegradation Process

Here, the influence of graphene as a coating on the biodegradation process for two different polymers is investigated, poly(butylene adipate-co-terephthalate) (PBAT) (biodegradable) and low-density polyethylene (LDPE) (non-biodegradable). Chemical vapor deposition graphene was transferred to the surface of two types of polymers using the Direct Dry Transfer technique. Polymer films, coated and uncoated with graphene, were buried in a maturated soil for up to 180 days. The films were analyzed before and after exposure to microorganisms in order to obtain information about the integrity of the graphene (Raman Spectroscopy), the biodegradation mechanism of the polymer (molecular weight and loss of weight), and surface changes of the films (atomic force microscopy and contact angle). The results prove that the graphene coating acted as a material to control the biodegradation process the PBAT underwent, while the LDPE covered by graphene only had changes in the surface properties of the film due to the accumulation of solid particles. Polymer films coated with graphene may allow the production of a material that can control the microbiological degradation, opening new possibilities in biodegradable polymer packaging. Regarding the possibility of graphene functionalization, the coating can also be selective for specific microorganisms attached to the surface.     

Synthesis,Characterization and Environmental Applications of a New Bio-Composite Gelatin-Zr(IV) Phosphate

Gelatin-Zr(IV) phosphate composite (GT/ZPC) was synthesized by sol–gel method. Different techniques viz. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA), X-ray powdered diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used for the characterisation of GT/ZPC composite ion exchanger. The ion exchange capacity (IEC) of GT/ZPC was observed to be better (1.04 meq g^?1) than its inorganic counterpart (0.64 meq g^?1). The pH studies revealed the monofunctional nature of GT/ZPC with one inflection point. The distribution studies showed that the GT/ZPC was highly selective for Cd²⁺ as compare to other metal ions. The environmental applicability of ion exchanger has been analysed for binary separations of metal ions using column method. Cd²⁺ was effectively removed from synthetic mixture of metal ions (Zn²⁺, Pb²⁺, Ni²⁺, Co²⁺ and Cu²⁺).     

峡山地不同垂直带土壤层的水文功能及其影响因子

渗透性能和持水能力是土壤重要的水力学性质，是土壤调节径流、保持水土和涵养水源等水文功能的基础。以三峡库首的夷陵-大老岭山地为对象，采集亚高山棕壤针叶林地、中山黄棕壤针阔混交林与茶园地和低山黄壤针叶林地等4个样点剖面的土壤样品，在室内进行土壤饱和导水率、水分特征曲线和理化性质测定，量化了不同样地土壤渗透性能、持水能力和水分库容等水文功能参数，并明确了其主要影响因子。结果表明: 研究区山地土壤饱和导水率在0.06～14.78 mm/min之间，亚高山棕壤和中山黄棕壤林地土壤渗透性能较好，其平均饱和导水率在7.15～14.78 mm/ min之间，低山黄壤次之（1.3 9 mm/min），中山黄棕壤茶园土壤渗透能力最差（1.17 mm/min）。不同类型土壤的饱和含水量、毛管含水量、田间持水量存在较大差异，凋萎含水量差异较小。同一类型土壤的不同发生层内，土壤饱和含水量随土壤深度的增加而递减，毛管持水量和田间持水量随土层深度的增加波动上升。不同样地间土壤水分总库容差异较大，随着海拔的升高，土壤水分总库容增加。土壤水分特征参数与土壤性质的相关分析表明，饱和导水率与土壤总孔隙度呈显著正相关，与容重呈显著负相关；饱和含水量、毛管持水量、田间持水量均与土壤总孔隙度、粘粒含量呈显著性正相关，与容重呈显著负相关；饱和含水量与根系重量呈显著正相关；毛管持水量、田间持水量与砂粒含量呈显著负相关。与中山茶园地和低山黄壤林地相比，亚高山棕壤和中山黄棕壤林地渗透性能较好且持水性更强，具有更好的调蓄径流和涵养水源的水文功能。 关键词： 山地土壤；土壤孔隙度；饱和导水率；持水能力；三峡库区     

Sustainable Use of Coffee Husks For Reinforcing Polyethylene Composites

The utilization of the coffee husk fiber (CHF) from the coffee industry as a reinforcing filler in the preparation of a cost-effective thermoplastic based composite was explored in this study. The chemical composition and thermal properties of the CHF were investigated and compared with those of wood fiber (WF). CHF proved to be mainly composed of cellulose, hemicellulose and lignin, and exhibited similar thermal behavior to WF. High density polyethylene (HDPE) composites with CHF loadings of from 40 to 70% were prepared using melt processing and extrusion. The processing properties, mechanical behavior, water absorption and thermal performance of these composites were investigated. The effect of maleated polyethylene (MAPE) used as a coupling agent on the composite was explored. The experimental results showed that increasing the CHF loading in the HDPE matrix resulted in an increase in the modulus and thermal properties of the composites, but resulted in poor water resistance. The addition of a 4% MAPE significantly improved the interfacial behavior of the hydrophilic lignocellulosic fiber and the hydrophobic polymer matrix.     

隧道与横通道交叉角对火灾烟气蔓延影响机制研究

为探索隧道与横通道交叉角对火灾烟气蔓延的影响机制，采用FDS数值模拟，研究横通道与隧道不同交叉角情况下火灾烟气温度、浓度、烟气层高度等的变化规律，建立开启火源下风向横通道时隧道内烟气最高温度修正公式，提出烟气纵向蔓延恢复长度的概念，并探讨其影响规律。 结果表明:隧道和横通道交叉角越小，隧道内同一位置烟气层高度越高，当交叉角由90°降低到30°时，烟气层高度最大增加32%；烟气纵向蔓延恢复长度与交叉角及通风速率呈正相关，而与火源功率几乎无关。研究结果对隧道通风排烟系统设计及相关标准的制定具有参考意义。     

水体颗粒物以及土壤对有机物吸附常数的测定

本文介绍了用批量平衡测定水体悬浮颗粒物以及土壤对有机物吸附常数的测定方法，并给出实例和方法的注意事项。     

无机陶瓷纳滤膜分离高钠盐废水中的锶

本实验研究表明,仅用截留分子量为1000的无机陶瓷纳滤膜分离高钠盐模拟溶液中的锶,分离效果并不理想.为提高陶瓷纳滤膜对锶的选择分离效果,选择了分子量为3000的聚丙烯酸作为陶瓷纳滤膜分离的强化剂,重点探讨了溶液pH值、聚丙烯酸浓度、温度及离子强度对模拟溶液盐分离效果和膜通量的影响,并得到了适宜的锶钠分离条件.实验结果表明,在适宜条件下,通过聚丙烯酸强化和两级分离,陶瓷纳滤膜可大大提高模拟溶液中锶离子的选择分离效果,锶/钠的分离因子高达205.     

我国10万t／d以下城市污水处理工艺

我国城市污水处理厂的规模绝大多数在10万t／d以下（含10万t／d），由于10万t／d以下的城市污水处理的工艺繁多，且各有利弊，选择何种工艺对城市污水进行处理，是建设项目的业主、设计单位和主管政府部门较难解决但又必须解决的问题。本文从城市污水处理厂的处理工艺入手，根据国家的城市污水处理及污染防治技术政策，对10万t／d以下城市污水处理工艺进行排序和优选，并给出城市污水处理厂建设及运营的主要技术经济指标，供城市污水处理厂建设的相关方参考。     

γ-射线辐照法改善城市污水厂剩余污泥厌氧消化特性的研究

采用γ-射线辐照法对城市污水厂剩余污泥进行预处理，从固体组分、可溶性组分及厌氧产气量等角度来探讨γ-射线辐照法改善城市污水厂剩余污泥厌氧消化特性的可行性。结果表明，经γ-射线辐照处理后，污泥的平均粒径减小，在辐照剂量为6．51-30．75kGy范围内，粒径的减小率达30％-50％；可溶性有机组分随着辐照剂量升高而增加，当辐照剂量为19．4kGy时，SCOD增加率达552．5％；与未辐照相比，污泥经2．48、6．51、11．24kGy辐照处理后，厌氧消化累计产气量分别增加8．89％、19．74％和35．81％。γ-射线辐照法是一种有效的改善污泥厌氧消化特性的方法，11．24kGy左右的剂量可作为污泥预处理的最佳剂量。