Detection of antibiotics in chicken eggs obtained from supermarkets in Ho Chi Minh City,Vietnam

The residual levels of antibiotics in Vietnamese eggs were monitored from 2014 to 2015. A total of 111 egg packages, distributed by 11 different companies, were collected from supermarkets in Ho Chi Minh City and the levels of 28 antibiotics were analyzed using liquid chromatography-tandem mass spectrometry (LC-MS/MS) screening method. Sixteen samples tested positive for antibiotics; a total of eight compounds (enrofloxacin, ciprofloxacin, norfloxacin, sulfadimethoxine, sulfamethazine, sulfamonomethoxine, tilmicosin and trimethoprim) were detected. Enrofloxacin was detected in eight samples, with two samples exhibiting concentrations exceeding 1,000 µg kg^?1. Tilmicosin was detected in three samples at a range of 49–568 µg kg^?1. We observed that two of the 11 companies frequently sold antibiotic-contaminated eggs (detection rates of 56 and 60%), suggesting that a number of companies do not regulate the use of antibiotics in egg-laying hens. Our findings indicate that livestock farmers require instruction regarding antibiotic use and that continual antibiotic monitoring is essential in Vietnam.     

Middle-thermophilic sulfur-oxidizing bacteria Thiomonas sp. RAN5 strain for hydrogen sulfide removal

Hydrogen sulfide (H2S) is one of the most toxic and offensively odorous gases and is generated in anaerobic bioreactors. A middle-thermophilic sulfur-oxidizing bacterium (SOB), Thiomonas sp. strain RAN5, was isolated and applied for H2S removal from both artificial and anaerobically digested gas. When a bioreactor containing medium inoculated with RAN5 was aerated continuously with artificial gas (containing 100 ppm H2S) at 45 degrees C for 156 hr, the H2S concentration in the vented gas was reduced by 99%. This was not affected by the presence of other microbes in the bioreactor The H2S removal efficiency of the RAN5 bioreactor for anaerobically digested gas was greater than 99% at influent H2S concentrations ranging from 2 to 1800 ppm; the efficiency decreased to 90% at influent H2S concentrations greater than 2000 ppm. Thiomonas sp. strain RAN5 cannot survive at room temperature, and thus its leakage from a wastewater treatment plant would not damage sewage systems. These data suggest that Thiomonas sp. strain RAN5 may be a useful microorganism for H2S removal.     

Evaluation of entanglement properties of crushed automobile shredded residue and detachment of entrapped particles

Automobile shredded residue is a potential solid fuel when its metal and chlorine-containing parts have been removed. The authors have investigated physical separation of automobile shredded residue to obtain the components that may be used in solid fuel and found that agglomerates of entangling fiber-like components are formed during crushing, making removal of metals and chlorine-containing parts difficult. In this paper, a reattachment ratio, entrapment ratio, and disentanglement ratio are proposed to evaluate the entanglement properties of crushed automobile shredded residue. It is found that products smaller than 16 mm were not reattached easily in the sieving process, and an index based on entanglement properties proposed here is useful to predict suitable crushing conditions. Wet detachment of entrapped particles from agglomerates of entangling materials was also applied to separate particulate matter from crushed ASR.     

The possibility of sustainable pest management by introducing bio-diversity: simulations of pest mite outbreak and regulation

Since the late 1980s, spider mite pests have caused serious damage to many moso bamboo (Phyllostachys pubescens) forests in China’s Fujian province. The culms of this plant are an essential component of the building and handicraft industries, and the shoots are a prized food item in many Asian countries. Furthermore, bamboo forests play an important soil conservation role in mountainous areas. We examined pest mite outbreaks in several moso bamboo plantations in Fujian, and could show that a change in cultivation style from polyculture (a kind of mixed forest) to monoculture (all plants other than bamboo were removed) was primarily responsible for the local extinction of an important predaceous mite species. This phenomenon is due to the periodic shedding of leaves by the bamboo, which forces the predator mites occurring on bamboo to switch to prey mite species that occur on other plants. We then tried to elucidate the factors that resulted from such a cultivation change. Adopting a computer simulation approach, we could successfully show that at least two plants, moso bamboo and Chinese silvergrass, are necessary to maintain stable predator–prey interactions in moso forests. That is, systems consisting of one common predator and two host-specific pest mites on different host plant species frequently became stable when the pest mites were at low density. This finding indicates clearly that bio-diversity, even when it consists of only two plants and three mite species as in this study, is necessary for the sustainable regulation of large-scale forests, such as moso bamboo plantations.     

Microbial Degradation of the Natural Rubber in Tire Tread Compound by a Strain of Nocardia

Tread compound of truck tires is based primarily on natural rubber or blends of natural rubber (NR) and synthetic polymers in combination with high grade carbon black. When the tread compound is attacked by a strain of Nocardia capable of degrading NR, part of the NR in the compound is mineralized, and part is disintegrated to very small black particles. The small black particles consist of the residual rubber and inorganic fillers. At higher NR content, large and deep cavities are formed on the surface of the pieces of the tread compound after microbial disintegration. At lower content of NR, large but very shallow cavities or very small pits can be seen on the tread surface. During microbial growth on the tread compound, isoprene oligomers with molecular weight of about two thousand are produced. Not only the isoprene oligomers, but also butadiene oligomers are produced during microbial disintegration of the tread compound of NR/synthetic rubber blend.     

Flow and geochemical modeling of drainage from Tomitaka mine, Miyazaki, Japan

The chemistry and flow of water in the abandoned Tomitaka mine of Miyazaki, western Japan were investigated. This mine is located in a non-ferrous metal deposit and acid mine drainage issues from it. The study was undertaken to estimate the quantities of mine drainage that needs to be treated in order to avoid acidification of local rivers, taking into account seasonal variations in rainfall. Numerical models aimed to reproduce observed water levels and fluxes and chemical variations of groundwater and mine drainage. Rock–water interactions that may explain the observed variations in water chemistry are proposed. The results show that: (1) rain water infiltrates into the deeper bedrock through a highly permeable zone formed largely by stopes that are partially filled with spoil from excavations (ore minerals and host rocks); (2) the water becomes acidic (pH from 3 to 4) as dissolved oxygen oxidizes pyrite; (3) along the flow path through the rocks, the redox potential of the water becomes reducing, such that pyrite becomes stable and pH of the mine drainage becomes neutral; and (4) upon leaving the mine, the drainage becomes acidic again due to oxidation of pyrite in the rocks. The present numerical model with considering of the geochemical characteristics can simulate the main variations in groundwater flow and water levels in and around the Tomitaka mine, and apply to the future treatment of the mine drainage.     

Using remote sensing and GIS to detect and monitor land use and land cover change in Dhaka Metropolitan of Bangladesh during 1960–2005

This paper illustrates the result of land use/cover change in Dhaka Metropolitan of Bangladesh using topographic maps and multi-temporal remotely sensed data from 1960 to 2005. The Maximum likelihood supervised classification technique was used to extract information from satellite data, and post-classification change detection method was employed to detect and monitor land use/cover change. Derived land use/cover maps were further validated by using high resolution images such as SPOT, IRS, IKONOS and field data. The overall accuracy of land cover change maps, generated from Landsat and IRS-1D data, ranged from 85% to 90%. The analysis indicated that the urban expansion of Dhaka Metropolitan resulted in the considerable reduction of wetlands, cultivated land, vegetation and water bodies. The maps showed that between 1960 and 2005 built-up areas increased approximately 15,924 ha, while agricultural land decreased 7,614 ha, vegetation decreased 2,336 ha, wetland/lowland decreased 6,385 ha, and water bodies decreased about 864 ha. The amount of urban land increased from 11% (in 1960) to 344% in 2005. Similarly, the growth of landfill/bare soils category was about 256% in the same period. Much of the city's rapid growth in population has been accommodated in informal settlements with little attempt being made to limit the risk of environmental impairments. The study quantified the patterns of land use/cover change for the last 45 years for Dhaka Metropolitan that forms valuable resources for urban planners and decision makers to devise sustainable land use and environmental planning.     

Behavior of dialifor,dimethoate, and methidathion in artificially fortified grape juice processed into wine

Abstract

Dialifor and methidathion were added to diluted “Zinfandel”; grape concentrate at 25 ppm and dimethoate at 1.0 and 25 ppm prior to fermentation with Saccharomyces cerevisiae. The finished wine 56 days later contained 10% (2.5 ppm) of the dialifor, 46% (12 ppm) of the methidathion and 85% (21 and 0.98 ppm) of the dimethoate added to the grape must. Residues in wine stored at 24°C dissipated by hydrolysis; half‐lives in wine were 7 days for dialifor and methidathion and 30 days for dimethoate. Residues were unchanged in wine in frozen storage for one year. Analysis of seven commercial wines for dimethoate indicated less than 0.03 ppm dimethoate was present; identity could not be confirmed by thin‐layer chromatography at this level.