红枫湖水库水体富营养化及浮游植物群落结构特征

2008-2009年通过对红枫湖水库浮游植物及环境因子进行采样调查,并运用综合营养状态指数对红枫湖水库营养状态进行评价.研究结果显示,红枫湖水库浮游植物全年以蓝藻、绿藻为主的优势种群落,且在2008-2009年经常性局部发生蓝藻水华:冬、春季节主要是水华束丝藻(Aphanizomenon flos-aquae)的蓝藻水华；夏季主要是微囊藻属(Microcystis)蓝藻水华；秋季浮游植物主要是颗粒直链藻(Melosira)和小环藻属(Cyclotella)为主的硅藻类群,未出现水华现象.通过综合营养状态指数计算得红枫湖水库水体水质处于富营养化状态.     

贵州省煤中挥发性和半挥发性微量元素分布规律的初步研究

研究了贵州省四大煤田不同层位、不同煤种中Hg,As,Se,Pb,Cd,Tl,Zn,Sb等挥发性和半挥发性微量元素的分布规律。贵州省原煤中Hg,As,Se,Pb,Cd,Sb等元素的含量高于地壳克拉克值;Tl,Zn等的含量低于地壳克拉克值;另外,除了Pb,Zn外,贵州省原煤中Hg,As,Se,Cd的含量远远高于东北和内蒙古东部地区。微量元素聚类分析结果表明,Hg,As,Sb可能主要分布于煤的黄铁矿中;Zn和Se可能主要赋存于闪锌矿中;Cd可能部分存在于硫化物中,部分存在于硅酸盐矿物相中;Pb可能主要存在于硅酸盐矿物相中;而Tl在煤中的赋存形式较复杂。     

The study on the dechlorination of OCDD with Pd/C catalyst in ethanol-water solution under mild conditions

Dechlorination of octachlorodibenzo-p-dioxin (OCDD) was carried out in ethanol-water (v/v=1:1) solution of NaOH in the presence of Pd/C catalysts with the use of H(2). The substrate was dechlorinated with Pd/C under mild conditions (atmospheric pressure and <100 degrees C) to give a chlorine-free product, dibenzo-p-dioxin (DD), in high yields. After reaction of 3h at 50 degrees C, 95.9% OCDD was degraded to low dechlorinated congeners and the yield of DD was 77.4%. We have also studied the dechlorination selectivity of chlorine atoms on the different substituted positions and postulated the dechlorination pathway of OCDD. For OCDD, the 2-position has higher reactivity than 1-position, but the difference is very small. From the distribution statistics of the intermediates during the reaction, we postulate that the steric effect plays an important role during the reaction and affect the dechlorination pathway of OCDD.     

银川平原主要湖泊湿地水环境现状调查与分析

为了掌握和了解银川平原主要湖泊湿地的水质环境状况,对宁夏沙湖、鸣翠湖、星海湖、阅海湖、鹤泉湖等湿地开展了水质现状调查和分析研究,结果表明,这些湖泊湿地都受到污染,沙湖、星海湖和鸣翠湖的水质受到轻度污染,水质根据地表水环境质量标准分类为IV类,鹤泉湖和阅海湖的水质受到中度污染,水之类别为V类。该研究为湿地资源保护与合理利用提供科学依据,对宁夏经济协调发展提供科技支撑。     

Heavy metal phytoextraction by Sedum alfredii is affected by continual clipping and phosphorus fertilization amendment

Improving the efficacy of phytoextraction is critical for its successful application in metal contaminated soils. Mineral nutrition affects plant growth and metal absorption and subsequently the accumulation of heavy metal through hyper-accumulator plants. This study assessed the effects of di-hydrogen phosphates (KH₂PO₄, Ca(H₂PO₄)₂, NaH₂PO₄ and NH₄H₂PO₄) application at three levels (22, 88 and 352 mg P/kg soil) on Sedum alfredii growth and metal uptake by three consecutive harvests on aged and Zn/Cd combined contaminated paddy soil. The addition of phosphates (P) significantly increased the amount of Zn taken up by S. alfredii due to increased shoot Zn concentration and dry matter yield (DMY) (P<0.05). The highest phytoextraction of Zn and Cd was observed in KH₂PO₄ and NH₄H₂PO₄ treatment at 352 mg P/kg soil. The amount of Zn removed by phytoextraction increased in the order of 1st clipping<2nd clipping<3rd clipping, and for Cd extraction the order was 2nd clipping<1st clipping<3rd clipping. These results indicate that the application of P fertilizers coupled with multiple cuttings can enhance the removal of Zn and Cd from contaminated soils by S. alfredii, thus shortening the time needed for accomplishing remediation goals.     

微塑料诱导下污泥造粒潜能变化及微生物富集特征

微塑料(MPs)是污水处理厂中普遍检出的新兴污染物之一,目前研究主要集中于传统污水处理系统的污染水平及分布特征,但有关微塑料暴露对污泥颗粒化过程的研究鲜见报道.为探究微塑料对污泥颗粒化的诱导影响,选用环境中广泛检出的聚对苯二甲酸乙二醇酯微塑料(PET-MPs)作为研究对象,通过微塑料暴露试验研究PET-MPs对污泥造粒过程中系统潜能、胞外聚合物(EPS)组成和菌群富集特征的影响.结果表明,PET-MPs暴露显著加快污泥颗粒化进程,同时以蛋白质(PN)为主导的EPS含量上升会增强污泥表面疏水性,造粒速度和EPS分泌量与暴露粒径成正比,微塑料和EPS协同促进颗粒污泥的形成.然而微塑料持续暴露会导致系统除污性能恶化,250μm PET-MPs暴露下亚硝酸盐氮积累的负面影响最严重,浓度高达(5.08±0.24)mg·L^-1.高通量测序结果进一步表明,变形菌门(Proteobacteria)和拟杆菌门(Bacteroidota)是促进颗粒污泥形成的主要优势门;红环菌科(Rhodocyclaceae)、鞘氨醇杆菌科(Sphingomonadaceae)、黄杆菌科(Flavob...     

用“条件”水分平衡法分析湖北省干旱的时空分布规律

从“条件”水分平衡角度和农业生产实际情况出发，提出了一个综合考虑水分盈亏和同期作物需水量的干旱指标，并用此指标分析了湖北省１９６１－１９９０年３０年来的主要干旱类型的时空分布规律及对农业生产的影响。     

报废汽车内饰件塑料浮选技术研究

报废汽车内饰件塑料品种复杂、难以分选,为此,以分离汽车内饰件中4种主体塑料——PP(聚丙烯)、ABS(丙烯腈-丁二烯-苯乙烯)、PC(聚碳酸酯)、PVC(聚氯乙烯)为目标,利用实验室自制浮选设备,考察了浮选液流量、溶气罐压力、润湿液浓度等因素对浮选效果的影响. 结果表明:当溶气罐压力为0.22 MPa、浮选液流量为10 L/min、润湿液中ρ(单宁酸)为15 mg/L时,一级浮选PP、ABS、PC、PVC效果达到最佳,其中PP和ABS为上浮料,二者上浮率分别为100%和98.63%;PC和PVC为下沉料,二者下沉率分别为98.95%和100%. 当溶气罐压力为0 MPa、浮选液流量为6 L/min、润湿液中ρ(单宁酸)为10 mg/L时,二级浮选完全分离PP/ABS;当溶气罐压力为0.24 MPa、浮选液流量为10 L/min、润湿液采用10 mg/L单宁酸和10 mmol/L癸二酸二丁酯时,二级浮选分离PC/PVC效果达到最佳,PC上浮率为92.87%,PVC下沉率为91.41%. 通过二级浮选分离,PP、ABS、PC、PVC的最终分离率分别达到100%、98.63%、92.87%和91.41%,显示出该二级浮选工艺在报废汽车内饰件塑料分选方面具有较为广阔的应用前景.      

Quality assured measurements of animal building emissions: gas concentrations

Comprehensive field studies were initiated in 2002 to measure emissions of ammonia (NH3), hydrogen sulfide (H2S), carbon dioxide (CO2), methane (CH4), nonmethane hydrocarbons (NMHC), particulate matter <10 microm in diameter, and total suspended particulate from swine and poultry production buildings in the United States. This paper focuses on the quasicontinuous gas concentration measurement at multiple locations among paired barns in seven states. Documented principles, used in air pollution monitoring at industrial sources, were applied in developing quality assurance (QA) project plans for these studies. Air was sampled from multiple locations with each gas analyzed with one high quality commercial gas analyzer that was located in an environmentally controlled on-farm instrument shelter. A nominal 4 L/min gas sampling system was designed and constructed with Teflon wetted surfaces, bypass pumping, and sample line flow and pressure sensors. Three-way solenoids were used to automatically switch between multiple gas sampling lines with > or =10 min sampling intervals. Inside and outside gas sampling probes were between 10 and 115 m away from the analyzers. Analyzers used chemiluminescence, fluorescence, photoacoustic infrared, and photoionization detectors for NH3, H2S, CO2, CH4, and NMHC, respectively. Data were collected using personal computer-based data acquisition hardware and software. This paper discusses the methodology of gas concentration measurements and the unique challenges that livestock barns pose for achieving desired accuracy and precision, data representativeness, comparability and completeness, and instrument calibration and maintenance.