京津冀区域重污染期间PM2.5垂直分布及输送

2016年12月17～19日重污染期间,在天津市武清区高村开展车载系留气球颗粒物浓度垂直观测,并以观测数据为基础,计算了区域内PM_(2.5)传输通量.结果表明重污染过程期间,大气混合层较低,约200 m左右,PM_(2.5)浓度垂直分布特征与混合层高度密切相关,混合层以下,PM_(2.5)浓度较高,垂直变化特征不显著,形成明显的污染层,混合层以上,PM_(2.5)浓度迅速降低并维持在降低水平.观测期间,粒径小于1. 0μm颗粒物浓度较高,粒径大于2. 2μm颗粒物浓度较低,近地层粒径为0. 777μm颗粒物浓度最高.颗粒物浓度粒径谱分布与相对湿度和混合层高度相关,高湿度和低混合层下颗粒物浓度粒径谱分布较宽泛.观测期间,PM_(2.5)在西南方向上的传输通量最高,占总传输通量的63. 3%,其中46～156 m和156～296 m高度之间PM_(2.5)传输通量最高.近地面300 m内PM_(2.5)传输主要以西南方向传输为主,300 m以上传输方向较分散.     

Visible-light-driven photocatalytic inactivation of bacteriophage f2 by Cu-TiO2 nanofibers in the presence of humic acid

Pathogenic viruses in drinking water are great threats to public health. Visible-light-driven photocatalysis is a promising technology for virus inactivation. However, the existing photocatalytic antiviral research studies have mostly been carried out in single-component systems, neglecting the effect of natural organic matter, which exists widely in actual water bodies. In this paper, electrospun Cu-TiO₂ nanofibers were prepared as photocatalysts, and their photocatalytic antiviral performance in the presence of humic acid (HA) was comprehensively studied for the first time. The properties of the reaction mixture were measured during the reaction. In addition, the safety, reliability and stability of photocatalytic disinfection in the mixed system were evaluated. The results showed that the virus removal efficiency decreased with the increase of the HA concentration. The type of reaction solution, such as PBS buffer solution or water, did not affect the removal efficiency noticeably. Under acidic conditions, the electrostatic forces between photocatalysts and viruses were strengthened, leading to higher virus removal efficiency. As the reaction time went on, the pH value in the solution increased first and then tended to be stable, the conductivity remained stable, and the dissolved oxygen increased first and then decreased. The safety test showed that the concentration of Cu ions released into the solution was lower than specified by the international standards. No photoreactivation was observed, and the addition of HA significantly reduced the reutilization efficiency of the photocatalysts.     

植物叶表尘及重金属对城市大气颗粒物污染的指示与评估

城市大气颗粒物污染问题日渐突出,目前主要依靠大气站点的直接观测数据反映污染的即时状况,而植物叶表尘及重金属的监测为评价大气颗粒物阶段性污染状况提供了新的途径.本研究通过分析北京交通带和公园共7个样点的臭椿(Ailanthus altissima)、槐(Sophora japonica)、北京杨(Populus beijingensis)、榆树(Ulmus pumila)、紫叶李(Prunus cerasifera f.atropurpurea)等5种常见绿化树种的叶表尘及重金属Cd、Cr、Cu、Mn、Ni、Pb、Zn含量,并计算尘金属综合累积指数(MAI),进而与邻近站点大气颗粒物观测数据对比并进行统计分析,尝试量化评价植物所处环境的大气颗粒物及尘重金属综合污染状况.结果表明:采用榆树叶表尘可量化评价大气可吸入颗粒物PM10的月均质量浓度,相对误差为1.2%~10.6%;臭椿叶表尘可量化评价大气细颗粒物PM2.5的月均质量浓度和月均空气质量指数(AQI),相对误差分别为0.18%~3.7%和0.26%~5.7%.MAI值可指示大气尘重金属综合污染状况,本研究中京承高速和朝阳公园大气尘重金属综合污染较重,其次为念坛公园、望京公园和玉蜓桥,最轻为岳各庄桥和麋鹿苑.     

生物电耦合对活性炭-超滤工艺处理地表微污染水的影响机理研究

利用生物电化学系统处理地表水时，弱电压不但会刺激电活性菌的呼吸作用，而且会引起氧化胁迫导致胞外聚合物（Extracellular Polymeric Substance，EPS）过量分泌.为确认在地表水处理中弱电压对膜污染和净水效率的影响，本研究设置了外加1.0 V直流电压（记为"BES系统"）和无外加电压（记为"CK系统"）的两组平行对照生物活性炭-超滤系统.经过50 d的运行，BES系统（36.1 kPa）相比CK系统（19.1 kPa）跨膜压差（Trans Membrane Pressure，TMP）增加更为显著，膜污染更严重.电路电流、电极电势和循环伏安（Cyclic Voltammetry，CV）曲线显示，随着装置运行，两系统生物膜逐渐稳定，并且产生具有氧化还原活性的EPS导致阳极电容增加.相比之下，BES系统产生了更多EPS，具有更高的阳极电容.水质指标显示，BES系统中比紫外吸光度（Specific Ultraviolet Absorbance，SUVA）、NH₄⁺-N和PO₄^3--P的去除增强但总有机碳（Total Organic Carbon，TOC）去除减弱；三维荧光光谱（Excitation-Emission-Matrix，EEM）和尺寸排阻色谱（Size Exclusion Chromatography，SEC）分析结果表明，BES系统膜池中产生了更多的生物聚合物，但腐殖质类有机物明显减少.活性炭表面EPS含量和腺嘌呤核苷三磷酸（Adenosine Triphosphate，ATP）含量的测试结果证实，弱电压刺激了生物膜的生长，同时增加了氧化还原活性EPS的含量.对膜表面累积多糖、蛋白质含量的测试分析进一步揭示了多糖类大分子生物聚合物在膜表面的累积是导致严重膜污染的直接原因.研究可为生物电化学系统在微污染水处理的研究和应用提供新的见解.     

Polystyrene nanoplastics affect growth and microcystin production of Microcystis aeruginosa

Nanoplastics are widely distributed in freshwater environments, but few studies have addressed their effects on freshwater algae, especially on harmful algae. In this study, the effects of polystyrene (PS) nanoplastics on Microcystis aeruginosa (M. aeruginosa) growth, as well as microcystin (MC) production and release, were investigated over the whole growth period. The results show that PS nanoplastics caused a dose-dependent inhibitory effect on M. aeruginosa growth and a dose-dependent increase in the aggregation rate peaking at 60.16% and 46.34%, respectively, when the PS nanoplastic concentration was 100 mg/L. This caused significant growth of M. aeruginosa with a specific growth rate up to 0.41 d^?1 (50 mg/L PS nanoplastics). After a brief period of rapid growth, the tested algal cells steadily grew. In addition, the increase in PS nanoplastics concentration promoted the production and release of MC. When the PS nanoplastic concentration was 100 mg/L, the content of the intracellular (intra-) and extracellular (extra-) MC increased to 199.1 and 166.5 μg/L, respectively, on day 26, which was 31.4% and 31.1% higher, respectively, than the control. Our results provide insights into the action mechanism of nanoplastics on harmful algae and the potential risks to freshwater environments.

     

Geochemistry of heavy metal-contaminated sediments from the Four River inlets of Dongting lake,China

Environmental Science and Pollution Research - The concentrations of major and trace elements in the sediments from the Four River inlets of Dongting Lake were analysed. The results show that the...     

Development of highly efficient and reusable magnetic nitrogen-doped carbon nanotubes for chlorophenol removal

Environmental Science and Pollution Research - Nitrogen-doped carbon nanotubes (N-CNTs) were synthesized via a hydrothermal method and further modified with magnetic Co0.5Cu0.5Fe2O4 nanoparticles...     

Polycyclic aromatic hydrocarbon and n-alkane pollution characteristics and structural and functional perturbations to the microbial community: a case-study of historically petroleum-contaminated soil

Characterization of the typical petroleum pollutants, polycyclic aromatic hydrocarbons (PAHs) and n-alkanes, and indigenous microbial community structure and function in historically contaminated soil at petrol stations is critical. Five soil samples were collected from a petrol station in Beijing, China. The concentrations of 16 PAHs and 31 n-alkanes were measured by gas chromatography-mass spectrometry. The total concentrations of PAHs and n-alkanes ranged from 973 ± 55 to 2667 ± 183 μg/kg and 6.40 ± 0.38 to 8.65 ± 0.59 mg/kg (dry weight), respectively, which increased with depth. According to the observed molecular indices, PAHs and n-alkanes originated mostly from petroleum-related sources. The levels of ΣPAHs and the total toxic benzo[a]pyrene equivalent (ranging from 6.41 to 72.54 μg/kg) might exert adverse biological effects. Shotgun metagenomic sequencing was employed to investigate the indigenous microbial community structure and function. The results revealed that Proteobacteria and Actinobacteria were the most abundant phyla, and Nocardioides and Microbacterium were the important genera. Based on COG and KEGG annotations, the highly abundant functional classes were identified, and these functions were involved in allowing microorganisms to adapt to the pressure from contaminants. Five petroleum hydrocarbon degradation-related genes were annotated, revealing the distribution of degrading microorganisms. This work facilitates the understanding of the composition, source, and potential ecological impacts of residual PAHs and n-alkanes in historically contaminated soil.

     

Thermal conversion of rice husks and sawdust to liquid fuel

The paper focuses on studying the conversion of rice husks and sawdust into liquid fuel. Rice husks, sawdust and their mixture are pyrolyzed at temperatures between 420 and 540 degrees C, and the main product of liquid fuel is obtained. The experimental result shows that the yield of liquid fuel depends on various factors such as feedstock and temperature. The maximum yields for rice husks, sawdust and their mixture are 56%, 61% and 60% at 465, 490 and 475 degrees C, respectively. Analyses with GC-MS and other apparatus show that the liquid fuel is a complicated compound with low caloric value and can be directly used as a fuel oil for combustion in a boiler or a furnace without any upgrading. Alternatively, the fuel can be refined to be used by vehicles.     

玻璃纸生产废气中CS2和H2S的治理

阐述了玻璃纸生产中CS2和H2S废气产生的原理,介绍了该废气处理的现状,总结了目前普遍采用的冷凝法、活性炭吸附法、活性碳纤维吸附法、改性活性炭吸附法、螯合铁氧化法、吸收-吸附法等处理方法的特点和效果。介绍了一种先采用螯合铁氧化法、再采用冷凝法、最后采用活性炭吸附法的综合处理工艺,可使废气达标排放。