新型环糊精聚合物对Zn2+的吸附研究

以β-环糊精(β-CD)和聚酰胺-胺(PAMAM)为原料,合成了新型环糊精聚合物(PAMAM-CD),并用元素分析、扫描电镜(SEM)和傅里叶红外光谱(FT-IR)对其进行了表征.提出了PAMAM-CD与Zn2+最可能的5种配位方式,研究了PAMAM-CD对Zn2+的吸附动力学及等温吸附特性.结果表明:吸附平衡时间为300min,最佳pH值为5~6.5,吸附量达0.78mmol/g.吸附过程符合伪二级动力学模型,速率控制步骤为粒内扩散控制,吸附等温线符合Freundlich模型.在288,298,303,308K时,ΔG分别为-2.139,-2.417,-2.188和-2.218 kJ/mol,表明PAMAM-CD对Zn2+的吸附是一个自发过程.     

SHMP分散配制用于环境风险模拟研究的纳米ZnO颗粒溶胶

选择SHMP(六偏磷酸钠)作分散剂,研究超声时间与静置时间对商购纳米ZnO的优化分散效果,以配制出用于环境风险模拟研究中的分散粒径小、效果稳定且浓度较高的纳米ZnO颗粒溶胶. 结果表明,相同条件下加分散剂的体系分散效果好于不加分散剂体系. 最佳优化分散方法:在100 mL超纯水中先加入45 mg SHMP作分散剂,再加入0.5 g的商购纳米ZnO,超声60 min后静置6 d,最终得到的颗粒溶胶平均粒径为(176.5±15)nm (纳米粒度-Zeta电位仪),TEM表征粒径为60～90 nm,Zeta电位为(-64.7±5.64)mV,实测分散浓度为(95.87±4.37)mg/L,其稳定性基本可以维持5 d.      

三峡水库香溪河库湾冬季甲藻水华生消机理初探

2010年1—2月在香溪河库湾上、中、下游各选取1个监测点对水体环境因子及藻类进行监测,对水温、营养盐含量等进行分析,探讨香溪河库湾冬季甲藻水华的生消机理. 结果表明:2010年冬季,香溪河库湾末端暴发了甲藻水华,持续44 d,优势藻种为拟多甲藻(Peridiniopsis sp.),最高细胞密度达到11.8×106 L-1;适宜的水温、充足的营养盐以及良好的光照、弱分层水体是香溪河库湾冬季甲藻水华暴发的主要原因;Zmix/Zeu〔Zmix(混合层深度)与Zeu(真光层深度)之比〕在2~3之间时有利于甲藻生长;库湾中下游因水体掺混强烈而在冬季未暴发水华;后期水体分层状态的加强及Zmix/Zeu的减小是甲藻水华消失的主要原因.      

气浮/UASB/水解酸化/接触氧化处理增塑剂废水工程实例

以宁波爱敬化工有限公司增塑剂生产废水处理工程为例,基于其水质特征,构建气浮/UASB/水解酸化/接触氧化处理工艺,介绍该废水处理工程的工艺参数和调试及运行效果。运行结果表明:气浮/UASB/水解酸化/接触氧化处理工艺对增塑剂废水处理效果显著,在日平均进水量180 t/d,ρ(COD)=7 000 mg/L的情况下,出水可稳定达GB 8978—1996《污水综合排放标准》一级排放标准。     

山地城市排水管网特细颗粒物特性及变化规律

对山地城市排水管网中特细颗粒物的粒径分布特征及变化规律、Zeta电位分布特征及变化规律和ρ(SS)的变化规律进行研究,同时对相关水化学参数(如电导率、pH)的变化规律进行了分析.结果表明:特细颗粒物的平均粒径、Zeta电位、ρ(SS)和电导率分别为21.04～73.53μm、-20.83～-11.15 mV、106～492 mg/L和973～2 445μS/cm,其统计平均值分别为(43.74±14.12)μm、(-17.95±1.88)mV、(233±90)mg/L和(1 343±331)μS/cm;pH为7.25～7.63.工业废水的排入对排水管网特细颗粒物的粒径分布特征、Zeta电位分布特征以及电导率有显著的影响并呈现出一定的规律性;传统沉砂池对进水中特细颗粒物的去除能力相当有限,特细颗粒物会直接进入生物处理系统.      

Mercury bioaccumulation in arthropods from typical community habitats in a zinc-smelting area

This study assessed the enrichment of mercury in the food web from the different community habitats in a zinc-smelting area of China. We used a nitrogen stable isotope technique to analyze trophic level relationships among arthropods and found that the first trophic level consisted of plants in the different community habitats, the second trophic level consisted of herbivores such as locusts and grasshoppers (primary consumers), and the third trophic level included spiders and mantes (secondary consumers). Mercury enrichment in the primary consumers was not evident, but enrichment in arthropods of the third trophic level was significant. The average of enrichment coefficients in spiders and mantes was greater than 1. The δ¹⁵N values indicated that mercury concentrations accumulated from primary producers to top carnivorous arthropods increased. In this zinc-smelting area, the biological amplification of mercury in the food web is significant. It is reasonable to assume that humans, located at the top of the food chain, are exposed to biomagnified levels of mercury.     

Efficiency of mercapto flavor compounds in removing acrylamide under high temperature and low humidity conditions

Acrylamide (AA) is a potential human carcinogen, genotoxicant, and neurotoxicant. Thus, the aim of this study was to examine the ability of mercapto flavor compounds to remove AA released from consumer packaging into food products. Four mercapto flavor compounds including 1,2-ethanedithiol, 1-butanethiol, 2-methyl-3-furanthiol, and 2-furanmethanethiol were employed to extract AA in model system using high temperature and low humidity. Our study showed that mercaptans were effective in eliminating AA in our model system. In order to remove 0.2 μmol AA, the optimal conditions in the reaction system were mercaptan flavor chemicals at 5 μmol, temperature 180 °C, and reaction time 25 min. In the presence of a higher pH, the greater was the amount of AA eliminated. Evidence indicates that employment of mercapto flavor chemicals under certain temperature and pH conditions is a reliable method to remove any unwanted AA from food products.     

Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

Species diversity variation of Cupressus funebris secondary forest in landslide site after 5.12 Wenchuan Earthquake北大核心CSCD

The characteristics of species diversity in Cupressus funebris secondary forest under the effect of geological hazard were explored by selecting the typical landslide surface of Fenghuang Mountain, Leigu Town, Beichuan County, which was derived from the 5.12 Wenchuan earthquake. The results showed that 93 species belonged to 42 families, and 78 genera were found in the landslide area, where the main families were Compositae, Leguminosae, and Gramineae-based. Further, 97 species in the transition area belonged to 39 families and 80 genera, and the main families were Compositae, Gramineae, and Rosaceae-based. In all, 108 species were recorded in the non-landslide area, which belonged to 59 families and 92 genera, the main families of which were Compositae, Rosaceae, and Gramineae-based. Compositae and Gramineae played important roles in the landslide recovery process after earthquake. The Pielou index (JSW) was the highest in the non-landslide area of the herb layer, whereas the richness index (D) was the lowest; the Shannon-Wiener index (H) and Simpson index (H') showed medium values. In the non-landslide area, the D, H, and H' were the highest in the shrub layer, whereas the JSW was the lowest. Further, the species diversity index of the transitional area was higher than that of the landslide area. In the tree layer, the D and H were both the highest and lowest in the landslide area and transition area, respectively. In contrast, the H' and JSW were the highest in the transition area and the lowest in the non-landslide area. The distribution of vegetation was generally consistent with the distribution of soil nutrients in the spatial distribution of surface soil nutrients. The succession of trees in the landslide area was relatively slow and at the initial stage, and the pioneer species were Coriaria nepalensis, Leptopus chinensis, and Arthraxon lanceolatus in this area. Taken together, the findings suggested that the stability of a plant community can be increased by improving the soil and stabilizing the slope. © 2018 Science Press. All rights reserved.     

High zinc removal from water and soil using struvite-supported diatomite obtained by nitrogen and phosphate recovery from wastewater

Zinc is known as an essential element of human life. However, excessive zinc discharge into water and soil causes water pollution, leading to serious health issues such as septicemia, meningitis and iron-deficiency anemia. Here, a novel material made of struvite-supported diatomite was obtained from eutrophic water treated by mesoporous MgO-modified diatomite. This material was applied for zinc remediation in aqueous solutions and contaminated soils to test the reuse of P-containing products. Struvite-supported diatomite was characterized by field emission scanning electron microscopy and X-ray diffraction. Results show that the maximum removal efficiency of Zn(II) from wastewater streams reached 90.54% at an initial pH of 5 and struvite-supported diatomite dosage of 0.3 g/L. Moreover, the X-ray diffraction patterns of precipitates after Zn(II) sorption show that the combination between zinc and the phosphate group played a key role for zinc removal in solution. For Zn-contaminated soils amended with 10% struvite-supported diatomite, available Zn decreased by 65.38% and acid soluble Zn decreased by 56.9% after 56 days.