Assessment of popular techniques for co-processing municipal solid waste in Chinese cement kilns

• Municipal solid waste (MSW) was fermented, screened, gasified, then co-processed. • Co-processing MSW in cement kilns could cause excessive pollutant emissions. • Bypass flue gas can be disposed of through the main flue system. • Popular MSW co-processing methods do not affect cement quality. Cement kiln co-processing techniques have been developed in the past 20 years in China, and more than 60 factories now use fermentation, screening, and gasification pre-treatment techniques to co-process municipal solid waste (MSW). There three complete MSW pre-treatment techniques, co-processing procedures, and environmental risk assessments have been described in few publications. In this study, we assessed the effectiveness of each technique. The results suggested that the pollutant content released by each pre-treatment technology was lower than the emission standard. To reveal the mechanisms of pollutant migration and enrichment, the substances in the kiln and kiln products are investigated. The input of co-processing materials (Co-M) produced by fermentation caused formation of polychlorinated dibenzo-p-dioxins and dibenzofuran (PCDD/Fs) in the bypass flue gas (By-gas) in excess of the regulatory standard. The Co-M input produced by the screening and gasifier technologies caused the total organic carbon (TOC) concentration to exceed the standard. In addition, the NO_x, TOC, and PCDD/Fs in the By-gas exceeded the regulatory standard. Raw meal was the primary chlorine and heavy metals input stream, and clinker (CK) and cement kiln dust (CKD) accounted for>90% of the total chlorine output stream. Flue gas and CKD were the primary volatile heavy metal (Hg) output streams. Greater than 70% of the semi-volatile heavy metals (Cd, Pb, Tl and Se) distributed in hot raw meal and bypass cement kiln dust. The low-volatility heavy metals were concentrated in the CK. These results indicated that co-processing techniques used in China still require improvement.     

中国西部能源及矿业开发与环境保护协调发展研究

中国西部地区自然环境脆弱且恶劣,但能源及矿产资源分布相对集中,能源及矿业开发已经成为其经济社会发展的支柱产业.本文力图从西部能源及矿业开发与环境保护协调发展、促进资源开发与生态保护的视角,综合辨析出西部地区能源及矿业开发引发的地质环境及生态环境恶化问题,主要包括土壤污染与土地破坏、水资源污染与短缺、矿区大气污染、噪声污染以及采矿诱发的各类地质灾害和生态环境破坏等.文章认为:西部地区矿产资源和能源开发等人为因素引发的地质环境及生态环境恶化问题日益突出,增强西部地区可持续发展能力,确保资源开发与环境保护的协调发展是西部地区提高能源资源保障能力的现实选择,也是转变发展方式、建设“两型”社会的必然要求.为此,本文对西部地区能矿资源开发与环境保护的协调发展提出了相关建议,主要包括:大力推行绿色发展,极开发绿色新能源;加强资源管理与污染控制,建立、健全矿产资源开发环境保护相关法律法规和体系,健全生态补偿机制;通过市场准入制度设立绿色门槛,继续整合小矿山;加强西部资源型城市与沿海地区的区域融合,减少资源开发的负外部性,破除“资源诅咒”;借鉴国际上“责任矿产开发倡议”,提高能源及矿产资源开发利益相关者的参与能力;统筹协调资源税费、地方发展基金,明确资源税的调节作用,健全利益分配机制,设立绿色发展基金;加强能矿资源开发全过程的第三方独立监管,在能源及矿产资源开发过程中实行有效透明的监管等.     

环境空气自动监测质量管理探讨

以云南省城市空气自动监测站质控考核为依据,对考核中发现的问题进行了详细分析,探讨如何做好空气自动监测质量管理。     

重庆市煤矸山周边农产品镉健康风险评价及土壤环境基准值推导

以重庆市煤矸山周边农用地土壤和农产品（玉米和水稻）为研究对象,测定土壤和农产品（玉米和水稻）中Cd含量,评估摄入农产品（玉米和水稻）对人体的潜在健康风险,并基于物种敏感性分布法（SSD）推导土壤环境基准值.结果表明,重庆煤矸山周边旱地土壤Cd含量超风险筛选值的点位占55.8%,水田土壤Cd含量超风险筛选值的点位占31.6%,土壤Cd以较高生态危害和高生态危害为主,分别占47.4%和36.8%.玉米Cd含量超标点位占4.4%,水稻Cd含量均未超标.健康风险评价表明因食用玉米和水稻摄入Cd的非致癌健康风险可忽略,食用玉米摄入Cd存在可耐受致癌健康风险,食用水稻摄入Cd存在不可耐受致癌健康风险,且玉米和水稻Cd含量敏感度最高.SSD推导出煤矸山周边旱地土壤在pH≤5.5、5.57.5时Cd的环境基准值分别为0.491、0.382、0.376和0.588 mg ·kg^-1,水田土壤Cd的环境基准值为0.807 mg ·kg^-1.水田土壤和旱地土壤pH≤7.5时,现行土壤标准（GB 15618-2018）相对偏严;旱地土壤pH>7.5时,现行土壤标准（GB 15618-2018）相对偏宽松.应加强煤矸山周边土壤Cd污染防治和农产品安全利用研究,并对土壤Cd环境基准值进行适当调整.     

Spatial and temporal distribution of polycyclic aromatic hydrocarbons (PAHs) in sediments of the Nansi Lake, China

Polycyclic aromatic hydrocarbons (PAHs) were measured in surface sediments and dated core sediments from the Nansi Lake of China to investigate the spatial and temporal distribution characteristics. The concentrations of 16 kinds priority PAH compounds were determined by GC-MS method. And ²¹⁰Pb isotope dating method was used to determine the chronological age of the sediment as well as the deposition rate. The results indicated that the total PAHs concentration ranges in surface and core sediment samples were 160 ~32,600 and 137 ~ 693 ng/g (dry wt.), respectively. The sediment rate and the average mass sedimentation were calculated to be 0.330 cm·year^???1 and 0.237 g·cm^???2·yr^???1 and the sediment time of the collected core sample ranged from 1899 to 2000. The peak of PAH concentrations came at recent years. The source analysis showed PAHs mainly came from the contamination of low temperature pyrogenic processes, such as coal combustion. The PAHs concentrations were lower than ERL and LEL values for most collected samples. However, in several surface sediment samples especially in estuary sites, the PAHs concentrations were not only higher than ERL and LEL values, but also higher than ERM values.     

液相化学发光分析在环境监测中的应用

介绍液相化学发光分析法的原理和特点以及十年来在我国环境监测中的应用。收录1983年～1991年国内的应用论文50余篇,作了较为系统全面的评述。     

改良型AO法组合工艺中有机物的三维荧光分析

采用三维荧光(EEM)光谱技术,对上海竹园第二污水处理厂改良型AO法组合工艺运行过程中的各种溶解性有机物(DOM)进行分析,并对比研究传统好氧活性污泥法曝气池出水和A/O脱氮工艺硝化池出水DOM的EEM光谱的迁移变化特性.结果表明,各种DOM中主要的荧光物质有类蛋白质(荧光峰A和B)及类腐殖质(荧光峰C),经改良型AO法组合工艺处理后,荧光峰的强度降低了14％～60％,同时类蛋白质和腐殖质的结构也发生了变化;腐殖酸溯源表明DOM中的腐殖酸以微生物代谢产生的带有荧光基团的腐殖酸类为主.     

水专项"十三五"时期辽河流域水环境管理研究思路初探

以水专项在辽河流域实施的阶段性成果及辽河流域水环境管理现状为基础,分析"十三五"时期辽河流域水环境管理的需求,提出构建成套流域水环境管理技术体系和管理大平台、全面建设并优化水生态环境监测网络、实行水环境管理的动态调节机制和建立健全流域水环境管理长效机制的水环境管理研究思路,并指出研究应密切结合地方管理,充分发挥地方环境管理的责任主体地位,为水专项第三阶段"综合调控"战略目标的实现提供有力支撑.     

采用固定化技术处理土壤中菲、芘污染物

采用动胶杆菌(Zoogloea sp.)固定化技术包埋来降解土壤中菲、芘污染物,在不同接种量、不同系列浓度下,对降解效果进行了测定.结果表明:5%的接种量最为合理,在168h时,固定化细菌对菲、芘的降解率达84.89%和76.94%;而在相同条件下土著菌降解仅达到27.85%和19.65%,因此动胶杆菌(Zoogloea sp.)具有更好的降解能力.另外,还用电镜观察研究了动胶杆菌在载体中的分布形态,表明了固定化细菌降解土壤中菲、芘具有较高的优势.