THERMAL GRADIENTS IN RIVERS AND RESERVOIRS DUE TO HEATED PLANT EFFLUENTS1

ABSTRACT The direction of heated effluents from large thermal power plants into streams and lakes has been a matter of public concern for some time, and the collection of prototype data related to the hydraulic aspects has taken on massive proportions. Unfortunately, most of the data are proprietary and not available for public analysis. The authors have endeavored to collect such data as are available to them for the initiation of steps toward generalization and the discussion of some of the more evident hydraulic considerations. The study is primarily concerned with rivers, including estuaries, with some interest in cooling ponds.     

Effects of head restraint and seat redesign on neck injury risk in rear-end crashes

Automobile insurance claims were examined to determine the rates of neck injuries in rear-end crashes for vehicles with and without redesigned head restraints, redesigned seats, or both. Results indicate that the improved geometric fit of head restraints observed in many newer vehicle models are reducing the risk of whiplash injury substantially among female drivers (about 37% in the Ford Taurus and Mercury Sable), but have very little effect among male drivers. New seat designs, such as active head restraints that move upward and closer to drivers' heads during a rear impact, give added benefit, producing about a 43% reduction in whiplash injury claims (55% reduction among female drivers). Estimated effects of Volvo's Whiplash Injury Prevention System and Toyota's Whiplash Injury Lessening design were based on smaller samples and were not statistically significant.     

The distribution of octachlorostyrene (OCS) in environmental samples from Europe

Although octachlorostyrene (OCS) was never used as a commercial product, it may be produced during incineration and combustion processes involving chlorinated compounds. Its environmental spreading was evaluated through the analysis of several representative samples. OCS could not be measured in soil samples collected from urban and rural areas or sediments, but was present (up to 5.41 ng/g dry weight) in industrial soil collected near chemically polluted areas. For aquatic biota samples, the OCS concentrations in freshwater mussels ranged from <0.01 ng/g wet weight (ww) to 0.18 ng/g ww (mean 0.06 ng/g ww) and similar levels could be measured in 11 freshwater fish species from Belgium and Romania. A higher OCS contamination level was found in shrimps (mean 0.08 ng/g ww) compared to marine fish (mean 0.02 ng/g ww for bib and 0.01 ng/g ww for sole and whiting, respectively). OCS could also be measured in 19 harbour porpoise (Phocoena phocoena) liver samples with a mean value of 1.90 ng/g ww. According to these data, it could be computed that the biomagnification factor for OCS was one order of magnitude lower than that of HCB in the fish-porpoise food chain. The mean OCS concentrations in blue tits (Parus caeruleus) eggs and great tits (Parus major) adipose tissue were 1.24 ng/g ww and 3.24 ng/g ww, respectively. OCS could be measured in different tissues of hedgehog (Erinaceus europaeus), with the highest concentrations found in adipose tissue (mean 0.34 ng/g ww) and liver (mean 0.39 ng/g ww). In contrast, only low concentrations of OCS could be measured in human adipose tissue (up to 0.38 ng/g ww) and liver (up to 0.05 ng/g ww), while it could not be detected in human brain or lung. The relationship between the concentrations of OCS and HCB was also discussed for each species.     

WATER USE AND WATER CONSERVATION BY THE COPPER MINING INDUSTRY1

ABSTRACT: This paper examines the use of water by copper mines for treating low grade ores. The froth flotation process for treating sulphide ore and the heap leaching process for treating oxide ore are described, and ways of reducing the amount of water used in these processes are discussed. Estimates of the costs reducing water consumption are given. Finally, the circumstances in which it would be desirable for a copper mine to reduce its level of water consumption are considered.     

In vitro methane removal by volcanic pumice soil biofilter columns over one year

Soil methane (CH(4)) biofilters, containing CH(4)-oxidizing bacteria (methanotrophs), are a promising technology for mitigating greenhouse gas emissions. However, little is known about long-term biofilter performance. In this study, volcanic pumice topsoils (0-10 cm) and subsoils (10-50 cm) were tested for their ability to oxidize a range of CH(4) fluxes over 1 yr. The soils were sampled from an 8-yr-old and a 2-yr-old grassed landfill cover and from a nearby undisturbed pasture away from the influence of CH(4) generated by the decomposing refuse. Methane was passed through the soils in laboratory chambers with fluxes ranging from 0.5 g to 24 g CH(4) m(-3) h(-1). All topsoils efficiently oxidized CH(4). The undisturbed pasture topsoil exhibited the highest removal efficiency (24 g CH(4) m(-3) h(-1)), indicating rapid activation of the methanotroph population to the high CH(4) fluxes. The subsoils were less efficient at oxidizing CH(4) than the topsoils, achieving a maximum rate oxidation rate of 7 g CH(4) m(-3) h(-1). The topsoils exhibited higher porosities; moisture contents; surface areas; and total C, N, and available-P concentrations than the subsoils, suggesting that these characteristics strongly influence growth and activity of the CH(4)-oxidizing bacteria. Soil pH values and available-P levels gradually declined during the trial, indicating a need to monitor chemical parameters closely so that adjustments can be made when necessary. However, other key soil physicochemical parameters (moisture, total C, total N) increased over the course of the trial. This study showed that the selected topsoils were capable of continually sustaining high CH(4) removal rates over 1 yr, which is encouraging for the development of biofilters as a low-maintenance greenhouse gas mitigation technology.     

Occurrence of alternative flame retardants in indoor dust from New Zealand: indoor sources and human exposure assessment

Due to worldwide restrictions on polybrominated diphenyl ethers (PBDEs), the demand for alternative flame retardants (AFRs), such as organophosphate flame retardants (OPFRs), novel brominated FRs (NBFRs) and hexabromocyclododecanes (HBCDs), has recently increased. Little is known about human exposure to NBFRs and OPFRs and that their levels in dust have been scarcely evaluated worldwide. To increase the knowledge regarding these chemicals, we measured concentrations of five major NBFRs, ten OPFRs and three HBCD isomers in indoor dust from New Zealand homes. Dust samples were taken from living room floors (n=34) and from mattresses of the same houses (n=16). Concentrations (ngg(-1)) of NBFRs were: 1,2-bis(2,4,6-tribromophenoxy)ethane (BTBPE) (<2-175), decabromodiphenyl ethane (DBDPE) (<5-1430), 2-ethylhexyl-2,3,4,5-tetrabromobenzoate (TBB) (<2-2285) and bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (TBPH) (<2-640). For OPFRs, concentrations (ngg(-1)) ranged between: tri-ethyl-phosphate (TEP) (<10-235), tri-n-butyl-phosphate (TnBP) (<20-7545), tris-(2-chloroethyl)-phosphate (TCEP) (<20-7605), tris-(1-chloro-2-propyl) phosphate (TCPP) (20-7615), tri-(2-butoxyethyl)-phosphate (TBEP) (50-27325), tris-(2,3-dichloropropyl)-phosphate (TDCPP) (20-16560), tri-phenyl-phosphate (TPhP) (20-35190), and tri-cresyl-phosphate (TCP) (<50-3760). HBCD concentrations fell in the range <2-4100ngg(-1). BTBPE, DBDPE, TBPH, TBEP, and TnBP showed significant positive correlation (p<0.05) between their concentrations in mattresses and the corresponding floor dust (n=16). These data were used to derive a range of plausible exposure scenarios. Although the estimated exposure is well below the corresponding reference doses (RfDs), caution is needed given the likely future increase in use of these FRs and the currently unknown contribution to human exposure by other pathways such as inhalation and diet.     

CH4/CO2 ratios indicate highly efficient methane oxidation by a pumice landfill cover-soil

Landfills that generate too little biogas for economic energy recovery can potentially offset methane (CH₄) emissions through biological oxidation by methanotrophic bacteria in cover soils. This study reports on the CH₄ oxidation efficiency of a 10-year old landfill cap comprising a volcanic pumice soil. Surface CH₄ and CO₂ fluxes were measured using field chambers during three sampling intervals over winter and summer. Methane fluxes were temporally and spatially variable (?0.36 to 3044 mg CH₄ m^?2 h^?1); but were at least 15 times lower than typical literature CH₄ fluxes reported for older landfills in 45 of the 46 chambers tested. Exposure of soil from this landfill cover to variable CH₄ fluxes in laboratory microcosms revealed a very strong correlation between CH₄ oxidation efficiency and CH₄/CO₂ ratios, confirming the utility of this relationship for approximating CH₄ oxidation efficiency. CH₄/CO₂ ratios were applied to gas concentrations from the surface flux chambers and indicated a mean CH₄ oxidation efficiency of 72%. To examine CH₄ oxidation with soil depth, we collected 10 soil depth profiles at random locations across the landfill. Seven profiles exhibited CH₄ removal rates of 70–100% at depths <60 cm, supporting the high oxidation rates observed in the chambers. Based on a conservative 70% CH₄ oxidation efficiency occurring at the site, this cover soil is clearly offsetting far greater CH₄ quantities than the 10% default value currently adopted by the IPCC.     

Desorption of PCDD/PCDF from municipal solid waste incinerator flyash under post-combustion plant conditions

The influence of temperature on the levels of PCDD and PCDF remaining in, and desorbed from, a municipal solid waste incinerator flyash was investigated by heating the ash to between 200 and 400 degrees C under a simulated flue gas for four days reaction time. Considerable desorption of PCDD/PCDF from the flyash was seen at 275 degrees C and above. Maximum desorption occurred at 350 degrees C, with the equivalent of nearly eight times the total PCDD/PCDF concentration of the original flyash being lost to the vapour phase per unit mass of initial flyash. The I-TEQ value of the desorbed PCDD/PCDF was considerable, being over fourteen times that of the original flyash at 325 degrees C. The results indicate that formation of PCDD/PCDF on flyash deposits in the post-combustion plant of incinerators can result in the release of significant amounts of PCDD/PCDF to the flue gas stream.     

Simplified contaminant source depletion models as analogs of multiphase simulators

Four simplified dense non-aqueous phase liquid (DNAPL) source depletion models recently introduced in the literature are evaluated for the prediction of long-term effects of source depletion under natural gradient flow. These models are simple in form (a power function equation is an example) but are shown here to serve as mathematical analogs to complex multiphase flow and transport simulators. The spill and subsequent dissolution of DNAPLs was simulated in domains having different hydrologic characteristics (variance of the log conductivity field=0.2, 1 and 3) using the multiphase flow and transport simulator UTCHEM. The dissolution profiles were fitted using four analytical models: the equilibrium streamtube model (ESM), the advection dispersion model (ADM), the power law model (PLM) and the Damkohler number model (DaM). All four models, though very different in their conceptualization, include two basic parameters that describe the mean DNAPL mass and the joint variability in the velocity and DNAPL distributions. The variability parameter was observed to be strongly correlated with the variance of the log conductivity field in the ESM and ADM but weakly correlated in the PLM and DaM. The DaM also includes a third parameter that describes the effect of rate-limited dissolution, but here this parameter was held constant as the numerical simulations were found to be insensitive to local-scale mass transfer. All four models were able to emulate the characteristics of the dissolution profiles generated from the complex numerical simulator, but the one-parameter PLM fits were the poorest, especially for the low heterogeneity case.