Migration of contaminants through the unsaturated zone overlying the Hesbaye chalky aquifer in Belgium: a field investigation

This paper presents the results of a detailed field investigation that was performed for studying groundwater recharge processes and solute downward migration mechanisms prevailing in the unsaturated zone overlying a chalk aquifer in Belgium. Various laboratory measurements were performed on core samples collected during the drilling of boreholes in the experimental site. In the field, experiments consisted of well logging, infiltration tests in the unsaturated zone, pumping tests in the saturated zone and tracer tests in both the saturated and unsaturated zones. Results show that gravitational flows govern groundwater recharge and solute migration mechanisms in the unsaturated zone. In the variably saturated chalk, the migration and retardation of solutes is strongly influenced by recharge conditions. Under intense injection conditions, solutes migrate at high speed along the partially saturated fissures, downward to the saturated zone. At the same time, they are temporarily retarded in the almost immobile water located in the chalk matrix. Under normal recharge conditions, fissures are inactive and solutes migrate slowly through the chalk matrix. Results also show that concentration dynamics in the saturated zone are related to fluctuations of groundwater levels in the aquifer. A conceptual model is proposed to explain the hydrodispersive behaviour of the variably saturated chalk. Finally, the vulnerability of the chalk to contamination issues occurring at the land surface is discussed.     

Past, current and future fire frequency in the Canadian boreal forest: implications for sustainable forest management

Over the past decades, there has been an increasing interest in the development of forest management approaches that are based on an understanding of historical natural disturbance dynamics. The rationale for such an approach is that management to favor landscape compositions and stand structures similar to those of natural ecosystems should also maintain biological diversity and essential ecological functions. In fire-dominated landscapes, this approach is possible only if current and future fire frequencies are sufficiently low, comparing to pre-industrial fire frequency, that we can substitute fire by forest management. We address this question by comparing current and future fire frequency to historical reconstruction of fire frequency from studies realized in the Canadian boreal forest. Current and simulated future fire frequencies using 2 and 3 x CO2 scenarios are lower than the historical fire frequency for many sites, suggesting that forest management could potentially be used to recreate the forest age structure of fire-controlled pre-industrial landscapes. There are however, important limitations to the current even-age management.     

Displacement and sweep efficiencies in a DNAPL recovery test using micellar and polymer solutions injected in a five-spot pattern

Soil washing with micellar solutions is a promising alternative for the remediation of DNAPL source zones. As with any flushing technology, the success of soil washing with micellar solutions depends in a very large part on the ability of the solution to contact the contaminant (sweep efficiency) and then on the efficiency of contaminant removal once this contact is made (displacement efficiency). We report here on a field test where a micellar solution was used to recover a DNAPL in an open five-spot pattern in which polymer solutions were also injected before and after the washing solution to improve sweep efficiency. The washing solution formulation was optimised in the laboratory prior to the test to obtain good dissolution capacity. For a high-concentration and low-volume soil flushing remediation test such as the one performed (0.8 pore volumes of actual washing solution injected), slug sizing of the washing solution is critical. It was evaluated by an analytical solution. In a five-spot pattern, the displacement efficiency of the washing solution was observed to vary in the porous medium as a function of the radial distance from the injection well because: (1) the volume of the washing solution flowing through a section of the test cell changes (maximum close to the injection well and minimal at the pumping wells); (2) the in situ velocity changes (maximum at the wells and minimum between the wells) and; (3) the contact time of the washing solution with the NAPL changes as a function of the distance from the injection well. The relative importance of the recovery mechanisms, mobilisation and dissolution, was also observed to vary in the test cell. The reduced velocity increased the contact time of the washing solution with the DNAPL enhancing its dissolution, but the decrease of the capillary number caused less mobilisation. The washing process is much more extensive around the injection well. The use of an injection-pumping pattern allowing a complete sweep of the remediated area is essential. Following a comprehensive characterisation, modeling is an efficient tool to design the injection-pumping scheme and to optimise injection and pumping rates providing the best areal sweep. The vertical sweep can be controlled by using a polymer solution (Xanthan gum). The polymer solution also has a positive effect on front stability between the solutions injected. The injection rate of the polymer solution that follows the washing solution must be kept minimal initially to prevent dilution of the washing solution by fingering.     

Influence of insect hormones on the establishment of dominance hierarchies among foundresses of the paper wasp,Polistes gallicus

Summary Laboratory studies on overwintered foundresses of Polistes gallicus show that differences in the endocrine activity are mainly responsible for achieving the dominance rank. Females that became dominant had either larger corpora allata or more developed ovaries than subordinate females. Body size did not contribute to dominance rank. Since a correlation exists between the length of terminal oocytes and the ecdysteroid titre in haemolymph as well as between the volume of corpora allata and the synthesis of juvenile hormone, dominant behaviour is thought to depend upon an elevated hormone titre in haemolymph. Injections of juvenile hormone (JHI) and 20-hydroxyecdysone, separately and simultaneously, significantly increased the probability that the treated female would be the dominant female of a test pair. After a hierarchy has been established, endocrine activity in subordinate foundresses is inhibited by the dominant foundress that then monopolizes reproduction.     

Prenatal diagnosis of congenital my asthenia with arthrogryposis in a myasthenic mother

We studied two children born to a myasthenic mother. The first child, a female, had multiple flexion contractures. She died 1 h after birth. In the second pregnancy, 3 years later, ultra-sonographic examination at 20 weeks showed decreased fetal movements and multiple flexion contractures. The pregnancy was interrupted. Eight other cases of congenital rnyasthenia with arthrogryposis are known; four of them are siblings. The recurrence risk may be as high as 100 per cent. Our second case demonstrates that prenatal diagnosis is possible early enough to allow termination of pregnancy.     

FMEA and consideration of real work situations for safer design of production systems

Production equipment designers must ensure the health and safety of future users; in this regard, they augment requirements for standardizing and controlling operator work. This contrasts with the ergonomic view of the activity, which recommends leaving operators leeway (margins for manoeuvre) in performing their task, while safeguarding their health. Following a brief analysis of design practices in the car industry, we detail how the Failure Modes and Effects Analysis (FMEA) approach is implemented in this sector. We then suggest an adaptation that enables designers to consider real work situations. This new protocol, namely, work situation FMEA, allows experience feedback to be used to defend the health standpoint during designer project reviews, which usually only address quality and performance issues. We subsequently illustrate the advantage of this approach using two examples of work situations at car parts manufacturers: the first from the literature and the second from an in-company industrial project.     

A development in energy flow/barrier analysis

In this paper, the occupational accidents and their effects on people are modeled. The basis of energy flow/barrier analysis is used to define an accident as the impact of a hazardous agent on a target, as a result of failure of control and protective barriers. This definition is enhanced to include serial and parallel barriers and to distinguish energy barriers from target barriers. The barrier attributes are defined and used to create a quantitative scenario-building model. The probability and severity of various accidents are estimated, by studying barrier reliability and efficiency. This approach is used to develop and simulate accident scenarios and to calculate their consequences. This model can be used in complex systems for analyzing the risk and estimating the importance of barriers.     

Effects of long exposure to low temperatures on nitrifying biofilm and biomass in wastewater treatment

Attached growth biological treatment systems are a promising solution to ammonia removal in cold-temperature climates. Environmental scanning electron microscopy (ESEM) and confocal laser scanning microscopy in combination with fluorescent in situ hybridization (FISH) was used to investigate the effects of 4 months of exposure to 4 degrees C on nitrifying biofilm and biomass. These molecular and microscopic methods were modified to minimize loss of mass and distortion of in situ perspectives. Environmental scanning electron microscopy revealed that nitrifying biofilm did not exhibit significant changes in volume with exposure to 4 degrees C. Confocal laser scanning microscopy in combination with FISH showed that the number of ammonia-oxidizing bacteria (AOB) cells present in the biofilm was statistically consistent during exposure to 4 degrees C. The RNA content of AOB cells remained sufficient for FISH enumeration. The number of nitrite-oxidizing bacteria cells remained steady during exposure to 4 degrees C; however, the RNA content of the cells appeared to decrease with exposure to 4 degrees C, thereby preventing their enumeration using FISH.     

Common Pool Resource Appropriation under Costly Cooperation

In addition to the usual fixed costs, we introduce variable costs in a community's effort to cooperate in extracting from a common pool resource. Using a standard supervision mechanism, these variable costs are shown to be an increasing function of individual members' incentives to default. The model explains why we frequently observe communities that all cooperate and have relatively similar resource endowments, and yet achieve very different levels of extraction.