Determination of selenium by GFAAS in slurries of fish feces to estimate the bioavailability of this micronutrient in feed used in pisciculture

This paper presents a simple, fast and sensitive method to determine selenium in samples of feces and of fish feed by graphite furnace atomic absorption spectrometry (GFAAS) through the direct introduction of slurries of the samples into the spectrometer's graphite tube. The limits of detection (LOD) and quantification (LOQ) calculated for 20 readings of the blank of the standard slurries (0.50% m/v of feces or feed devoid of selenium) were 0.31 microg l(-1) and 1.03 microg l(-1), respectively, for the standard feces slurries and 0.35 microg l(-1) and 1.16 microg l(-1), respectively, for the standard feed slurries. The proposed method was applied in studies of bioavailability of selenium in different fish feeds and the results proved consistent with that obtained from samples mineralized by acid digestion using the microwave oven.     

Photochemical processing of aldrin and dieldrin in frozen aqueous solutions under arctic field conditions

Organochlorine (OC) contaminants are transported to the Polar Regions, where they have the potential to bioaccumulate, presenting a threat to the health of wildlife and indigenous communities. They deposit onto snowpack during winter, and accumulate until spring, when they experience prolonged solar irradiation until snowmelt occurs. Photochemical degradation rates for aldrin and dieldrin, in frozen aqueous solution made from MilliQ water, 500 μM hydrogen peroxide solution or locally-collected melted snow were measured in a field campaign near Barrow, AK, during spring-summer 2008. Significant photoprocessing of both pesticides occurs; the reactions depend on temperature, depth within the snowpack and whether the predominant phase is ice or liquid water. The effect of species present in natural snowpack is comparable to 500 μM hydrogen peroxide, pointing to the potential significance of snowpack-mediated reactions. Aldrin samples frozen at near 0 °C were more reactive than comparable liquid samples, implying that the microenvironments experienced on frozen ice surfaces are an important consideration.     

Isolation of mesotrione-degrading bacteria from aquatic environments in Brazil

Mesotrione is a benzoylcyclohexane-1,3-dione herbicide that inhibits 4-hydroxyphenyl pyruvate dioxygenase in target plants. Although it has been used since 2000, only a limited number of degrading microorganisms have been reported. Mesotrione-degrading bacteria were selected among strains isolated from Brazilian aquatic environments, located near corn fields treated with this herbicide. Pantoea ananatis was found to rapidly and completely degrade mesotrione. Mesotrione did not serve as a sole C, N, or S source for growth of P. ananatis, and mesotrione catabolism required glucose supplementation to minimal media. LC-MS/MS analyses indicated that mesotrione degradation produced intermediates other than 2-amino-4-methylsulfonyl benzoic acid or 4-methylsulfonyl-2-nitrobenzoic acid, two metabolites previously identified in a mesotrione-degrading Bacillus strain. Since P. ananatis rapidly degraded mesotrione, this strain might be useful for bioremediation purposes.     

In situ assays with tropical cladocerans to evaluate edge-of-field pesticide runoff toxicity

Tropical regions’ economy is usually based on agriculture, which involves an intensive use, and even frequent overuse, of pesticides. Nevertheless, not much research has been done on the impact of pesticides on tropical aquatic ecosystems, which are often contaminated by runoff-related pesticide inputs due to unpredictable and torrential rainfalls. This study aimed to: (i) adapt and evaluate a short-term sublethal in situ assay using post-exposure feeding as an endpoint, to the tropical cladoceran species Diaphanosoma brachyurum (collected at the Pedra do Cavalo dam in the Paraguaçu River basin, Bahia, Brazil), and, (ii) assess the role of the standard species Daphnia magna as an adequate laboratory surrogate. Lethal and sublethal (post-exposure feeding) responses were assessed for the two species. To evaluate these responses under environmentally realistic exposure conditions, a runoff event was simulated in an agricultural area previously contaminated with different deltamethrin concentrations. The resultant runoff water was used to set up microcosms with different dilutions, simulating the entrance of runoff water in an adjacent lentic system. An in situ assay with D. brachyurum was performed inside the microcosms, allowing to discriminate the effects due to deltamethrin from those due to other potential stressors associated with the experimental design (e.g. organism handling, load of suspended particles, microcosm design). Water samples were collected from microcosms to conduct a laboratory assay with D. magna. The in situ methodologies revealed to be suitable to conduct assays with D. brachyurum under tropical conditions, since all exposed organisms were successfully retrieved from the chambers. Furthermore, none of the potential stressors associated with the experimental design influenced the daphnids’ performance. The tropical cladoceran species, exposed under more realistic conditions, revealed to be more sensitive than the laboratory standard species: lethal effects were only observed for D. brachyurum and sublethal effects were noticed at a lower deltamethrin concentration for this species than for D. magna.     

Traffic and catalytic converter - related atmospheric contamination in the metropolitan region of the city of Rio de Janeiro, Brazil

In this work, 24-h PM10 samples were collected in Rio de Janeiro, Brazil, and analysed for trace elements (Cd, Ce, Cu, La, Mo, Ni, Pb, Pd, Rh, Sb and Sn). The sampling was carried out at five locations (Bonsucesso; Centro, downtown city; Copacabana; Nova Igua?u and Sumaré) with different traffic densities and anthropogenic activities. An analytical method based on the EPA method for the determination of trace elements in airborne particulate matter (PM), using ultrasonic-assisted extraction and inductively coupled plasma mass spectrometry (ICP-MS) was applied. Our results suggest that vehicular traffic is the most important source of environmental pollution at the studied sites. The presence of Mo, Pd and Rh in the analysed filters reflects an additional source of pollution caused by the erosion and deterioration of automotive catalytic converters.     

Sustainable tourism development in remote regions? Questions arising from research in the North Kimberley,Australia

This paper is concerned with the sustainable development of a self-drive tourist destination in the remote region in Northern Australia. It first compares officially used data on visitor profiles to the information collected in the survey. Differences between data collected and available secondary data imply that tourism planning should include collection of region-specific tourism information to guide and mitigate potential environmental changes. Natural landscape features are the key attraction for visitors to the region. Visitor satisfaction levels with the current state of the destination are high. However, local residents reported perceived negative impacts of tourism, in particular on amenities and the ecology of the landscape. Visitors also reported behavior that might contribute to environmental impacts. Implications of the findings, in the context of future destination planning, are discussed.     

Heavy metals in untreated/treated urban effluent and sludge from a biological wastewater treatment plant

Background, Aim and Scope

The presence of heavy metals in wastewater is one of the main causes of water and soil pollution. The aim of the present study was to investigate the removal of Cd, Cu, Pb, Hg, Mn, Cr and Zn in urban effluent by a biological wastewater treatment, as well as to quantify the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Ni, Pb, Sn, Tl, V and Zn in dewatering sludge from the Biological Wastewater Treatment Plant to Ribeirão Preto (RP-BWTP), Brazil.

Materials and Methods

Concentrations of Cd, Cr, Cu, Mn and Pb in wastewater and those of Ni in sludge were determined by atomic absorption spectrophotometry with graphite furnace atomization. Mercury concentrations in wastewater were measured by hydride generation atomic spectrophotometry, and Zn levels were determined by atomic absorption spectrophotometry using acetylene flame. In sludge, the levels of As, Be, Cd, Cr, Cu, Fe, Hg, Mn, Pb, Sn, Tl, V and Zn were determined by inductively coupled plasma-mass spectrometry.

Results

The percentages of removal efficiency (RE) were the following: Hg 61.5%, Cd 60.0%, Zn 44.9%, Cu 44.2%, PB 39.7%, Cr 16,5% and Mn 10.4%. In turn, the mean concentrations (mg/kg) of metals in dewatering sludge followed this increasing order: Tl (<0.03), Hg (0.31), Be (0.43), As (1.14), Cd (1.34), V (59.2), Pb (132.1), Sn (166.1), Cr (195.0), Mn (208.1), Ni (239.4), Cu (391.7), Zn (864.4) and Fe (20537).

Discussion

The relationship between metal levels in untreated wastewater, as well as the removal efficiency are in agreement with previous data from various investigators, It is important to note that metal removal efficiency is not only affected by metal ion species and concentration, but also by other conditions such as operating parameters, physical, chemical, and biological factors.

Conclusions

Metal values recorded for treated wastewater and sludge were within the maximum permitted levels established by the Environmental Sanitation Company (CETESB), São Paulo, Brazil.

Recommendations

There is an urgent need for the authorities who are responsible for legislation on sludge uses in agriculture of establishing safety levels for As, Be, Hg, Sn, Tl and V.

Perspectives

According to the current metal levels, RP-BWTP sludge might be used for agriculture purposes. However, for an environmentally safe use of sewage sludge, further studies including systematic monitoring are recommended. Annual metal concentrations and predicted variations of those elements in the sludge should be monitored.