Stand-alone PV-hydrogen energy system in Taleghan-Iran using HOMER software: optimization and techno-economic analysis

One of the most attractive features of hydrogen as an energy carrier is that it can be produced from water. Hydrogen has the highest energy content per unit mass as compared to chemical fuel and can be substituted. Its burning process is non-polluting, and it can be used in the fuel cells to produce both electricity and useful heat. Photovoltaic arrays can be used in supplying the water electrolysis systems by their energy requirements. During the daylight hours, the sunlight on the photovoltaic array converts into electrical energy which can be used for electrolyzer. The hydrogen produced by the electrolyzer is compressed and stored in hydrogen vessel and provides energy for the fuel cell to meet the load when the solar energy is insufficient. This study investigates a stand-alone power system that consists of PV array as power supply and electrolyzer. They have been integrated and worked at the Taleghan renewable energies’ site in Iran. The National Renewable Energy Laboratory’s Hybrid Optimization Model for Electric Renewables simulation software has been used to carry out the optimal design and techno-economic viability of the energy system. The simulation results demonstrate that energy system is composed of 10-kW PV array, 3.5-kW electrolyzer, 0.4-kW proton exchange membrane fuel cell, 2.5-kW inverter, and 60 batteries (100 Ah and 12 V). The total initial capital cost, net present cost, and cost of electricity produced from this energy system are 193,563 US$, 237,509 US$, and 3.35 US$/kWh, respectively.     

Cold plasma can alleviate cadmium stress by optimizing growth and yield of wheat (Triticum aestivum L.) through changes in physio-biochemical properties and fatty acid profile

Environmental Science and Pollution Research - Cold plasma (CP) application has increasing interest due to its environmental-friendly, high efficient, and low cost aspects to mitigate deletion...     

Integrated multitrophic aquaculture (IMTA) as an environmentally friendly system for sustainable aquaculture: functionality,species, and application of biofloc technology (BFT)

Environmental Science and Pollution Research - Aquaculture is one of the fastest-growing industries in the world, and its prominent role has been proven in supplying food for the growing world...     

Design and optimization of new La1−xCexNi1−yFeyO3 (x,y = 0–0.4) nano catalysts in dry reforming of methane

The paper reports the production of syngas from dry reforming of methane (DRM) over La_1?xCe_xNi_1?yFe_yO₃ (x, y = 0–0.4) perovskites. A series of La_1?xCe_xNi_1?yFe_yO₃ were designed by central composite design (CCD) and synthesized by a sol–gel auto combustion method. Artificial neural network (ANN) approach was used to determine the relationship between preparation and operational parameters on the performance of the catalysts in the DRM process. Nickel mole fraction, lanthanum mole fraction, calcination temperature, and reaction temperature were considered as input variables, and conversion of methane was considered as the output variable. An ANN model with nine neurons in the hidden layer was the suitable in predicting conversion of methane. The genetic algorithm (GA) was subsequently used to determine the optimal preparation condition for enhancing the conversion of methane. La_0.6Ce_0.4Ni_0.99Fe_0.01O₃ catalyst, calcined at 756°C was obtained to be the most active catalyst owing to the optimal composition of nickel and lanthanum in the catalyst formulation.     

Abundance,spatial distribution,and physical characteristics of microplastics in stormwater detention ponds

Despite extensive research on microplastics (MP) in marine environments, little is known about MP abundance and transport in terrestrial systems. There is, therefore, still little understanding of the main mechanisms driving the substantial transport of MP across different environmental compartments. Storm events can transport MP beyond boundaries, such as from the land to groundwater or the ocean, as has already been discovered for organic carbon transport. Urban stormwater detention ponds are suitable environments to study the impact of stormwater on the environmental fate and transport of MP. Herein, we investigate the longitudinal and vertical distribution of MP within two detention ponds with different physical characteristics. Soil samples were collected at various locations and from multiple depths (surface and subsurface layers) for measuring MP concentrations using fluorescence microscopy. Our findings show that MP are retained more near the inlet of the ponds, and MP of larger sizes were found more abundantly near inlets than outlets. We also found that MP mass and sizes decrease from surface soil to subsurface soil. In the pond, where vegetation (grass root network) was more considerable, MP were found more evenly distributed along the depth. In terms of shape, the fragments were the most abundant MP shape.     

Simple Arrhenius-type function accurately predicts dissolved oxygen saturation concentrations in aquatic systems

A sufficient supply of dissolved oxygen (DO) is vital for life in higher organisms. In aquatic systems, oxygen regulates respiratory metabolism, mediates biogeochemical cycles, and is an integral component of water quality. In this work, a simple predictive tool for dissolved oxygen saturation concentrations in aquatic systems as a function of chloride concentration and temperature using a novel Arrhenius-type asymptotic exponential function has been formulated. The proposed method predicts the amount of dissolved oxygen saturation concentrations for temperatures up to 50 °C and chloride concentrations up to 25 g/l. Estimations are found to be in excellent agreement with the reliable data in the literature with average absolute deviation being 3%. The tool developed in this study can be of immense practical value for the engineers and scientists to have a quick check on the oxygen saturation concentrations in aquatic systems at various conditions without opting for any experimental measurements. In particular, environmental science experts would find the proposed approach to be user-friendly with transparent calculations involving no complex expressions.     

Biological nutrient recovery from culturing of pearl gourami (Trichogaster leerii ) by cherry tomato (Solanum lycopersicum) in aquaponic system

Environmental Science and Pollution Research - The possibility of using different densities of cherry tomato as a bio-filter in a simple media-based aquaponic system to recycle nutrients from pearl...     

Life cycle energy use,costs, and greenhouse gas emission of broiler farms in different production systems in Iran—a case study of Alborz province

In order to achieve sustainable development in agriculture, it is necessary to quantify and compare the energy, economic, and environmental aspects of products. This paper studied the energy, economic, and greenhouse gas (GHG) emission patterns in broiler chicken farms in the Alborz province of Iran. We studied the effect of the broiler farm size as different production systems on the energy, economic, and environmental indices. Energy use efficiency (EUE) and benefit-cost ratio (BCR) were 0.16 and 1.11, respectively. Diesel fuel and feed contributed the most in total energy inputs, while feed and chicks were the most important inputs in economic analysis. GHG emission calculations showed that production of 1000 birds produces 19.13 t CO_2-eq and feed had the highest share in total GHG emission. Total GHG emissions based on different functional units were 8.5 t CO_2-eq per t of carcass and 6.83 kg CO_2-eq per kg live weight. Results of farm size effect on EUE revealed that large farms had better energy management. For BCR, there was no significant difference between farms. Lower total GHG emissions were reported for large farms, caused by better management of inputs and fewer bird losses. Large farms with more investment had more efficient equipment, resulting in a decrease of the input consumption. In view of our study, it is recommended to support the small-scale broiler industry by providing subsidies to promote the use of high-efficiency equipment. To decrease the amount of energy usage and GHG emissions, replacing heaters (which use diesel fuel) with natural gas heaters can be considered. In addition to the above recommendations, the use of energy saving light bulbs may reduce broiler farm electricity consumption.