Do you only have yourself to blame? A meta-analytic test of the victim precipitation model

The current meta-analysis sought to evaluate the empirical evidence for the victim precipitation model, which has become an increasingly popular yet controversial theory in the organizational sciences. We did so by testing the prediction that some victim dispositional traits contribute to or provoke experiences of mistreatment. We additionally provided preliminary examinations of two distinct conceptual explanations underlying the empirical relationships between victim personality and mistreatment. Finally, we examined the support for the situational antecedents of experienced mistreatment to compare the relative evidence for each of these dominant theoretical explanations. Results for the tests of the victim precipitation model showed that only victim negative affectivity was consistently related to experienced mistreatment. Examinations of the explanations for the relationships between victim personality and victimization showed relatively weak support for the notion that certain employees are more likely to perceive mistreatment and for the proposition that certain employees are mistreated because they are also more likely to engage in mistreatment. Finally, the situational predictors of mistreatment were all supported, and a test of relative importance revealed that the situational antecedents accounted for more variance in mistreatment than the victim dispositional traits. Implications for the theoretical understanding of the origins of mistreatment are discussed.     

Scientific Gear as a Vector for Non-Native Species at Deep-Sea Hydrothermal Vents

The fauna of deep-sea hydrothermal vents are among the most isolated and inaccessible biological communities on Earth. Most vent sites can only be visited by subsea vehicles, which can and do move freely among these communities. Researchers assume individuals of the regionally homogeneous vent fauna are killed by the change in hydrostatic pressure the animals experience when the subsea vehicles, which collected them, rise to the surface. After an Alvin dive, we found 38 apparently healthy individuals of a vent limpet in a sample from a hydrothermally inactive area. Prompted by our identification of these specimens as Lepetodrilus gordensis, a species restricted to vents 635 km to the south of our dive site, we tested whether they were from a novel population or were contaminants from the dive made 36 h earlier. The 16S gene sequences, morphology, sex ratio, bacterial colonies, and stable isotopes uniformly indicated the specimens came from the previous dive. We cleaned the sampler, but assumed pressure changes would kill any organisms we did not remove and that the faunas of the 2 areas were nearly identical and disease-free. Our failure to completely clean the gear on the subsea vehicle meant we could have introduced the species and any diseases it carried to a novel location. Our findings suggest that the nearly inaccessible biological communities at deep-sea vents may be vulnerable to anthropogenic alteration, despite their extreme physical conditions.     

Emission profile of 18 carbonyl compounds,CO, CO2, and NOx emitted by a diesel engine fuelled with diesel and ternary blends containing diesel,ethanol and biodiesel or vegetable oils

The impact of vehicular emissions on air depends, among other factors, on the composition of fuel and the technology used to build the engines. The reduction of vehicular emissions requires changes in the fuel composition, and improving the technologies used in the manufacturing of engines and for the after-treatment of gases. In general, improvements to diesel engines have targeted not only emission reductions, but also reductions in fuel consumption. However, changes in the fuel composition have been shown to be a more rapid and effective alternative to reduce pollution. Some factors should been taken into consideration when searching for an alternative fuel to be used in diesel engines, such as emissions, fuel stability, availability and its distribution, as well as its effects on the engine durability. In this work, 45 fuel blends were prepared and their stability was evaluated. The following mixtures (v/v/v) were stable for the 90-day period and were used in the emission study: diesel/ethanol – 90/10%, diesel/ethanol/soybean biodiesel – 80/15/5%, diesel/ethanol/castor biodiesel – 80/15/5%, diesel/ethanol/residual biodiesel – 80/15/5%, diesel/ethanol/soybean oil – 90/7/3%, and diesel/ethanol/castor oil – 90/7/3%. The diesel/ethanol fuel showed higher reduction of NO_x emission at a lower load (2 kW) when compared with pure diesel. The other fuels showed a decrease of NO_x emissions in the ranges of 6.9–75% and 4–85% at 1800 rpm and 2000 rpm, respectively. The combustion efficiencies of the diesel can be enhanced by the addition of the oxygenate fuels, like ethanol and biodiesel/vegetable oil, resulting in a more complete combustion in terms of NO_x emission. In the case of CO₂ the decreases were in the ranges of 5–24% and 4–6% at 1800 rpm and 2000 rpm, respectively. Meanwhile, no differences were observed in CO emission. The carbonyl compounds (CC) studied were formaldehyde, acetaldehyde, propionaldehyde, acrolein, acetone, crotonaldehyde, butyraldehyde, butanone, benzaldehyde, isovaleraldehyde, valeraldehyde, o-toluenaldehyde, m-toluenaldehyde, p-toluenaldehyde, hexaldehyde, octaldehyde, 2,5-dimethylbenzaldehyde, and decaldehyde. Among them, formaldehyde, acetaldehyde, acetone, and propionaldehyde showed the highest emission concentrations. When ternary blend contains vegetable oil, there is a strong tendency to increase the emissions of the high weight CC and decrease the emissions of the low weight CC. The highest concentration of acrolein was observed when the fuel contains diesel, ethanol and biodiesel. With the exception of NO_x, the use of ternary blended fuels resulted on the increase in the emission rates of the studied compounds.     

Characteristics of bicycle crashes among children and the effect of bicycle helmets

Abstract

Objective: Focusing on children (0–17?years), this study aimed to investigate injury and accident characteristics for bicyclists and to evaluate the use and protective effect of bicycle helmets.

Method: This nationwide Swedish study included children who had visited an emergency care center due to injuries from a bicycle crash. In order to investigate the causes of bicycle crashes, data from 2014 to 2016 were analyzed thoroughly (n?=?7967). The causes of the crashes were analyzed and categorized, focusing on 3 subgroups: children 0–6, 7–12, and 13–17?years of age. To assess helmet effectiveness, the induced exposure approach was applied using data from 2006 to 2016 (n?=?24,623). In order to control for crash severity, only bicyclists who had sustained at least one Abbreviated Injury Scale (AIS) 2+ injury (moderate injury or more severe) in body regions other than the head were included.

Results: In 82% of the cases the children were injured in a single-bicycle crash, and the proportion decreased with age (0–6: 91%, 7–12: 84%, 13–17: 77%). Of AIS 2+ injuries, 8% were head injuries and 85% were injuries to the extremities (73% upper extremities and 13% lower extremities). Helmet use was relatively high up to the age of 10 (90%), after which it dropped. Helmets were much less frequently used by teenagers (14%), especially girls. Consistently, the share of head injuries increased as the children got older. Bicycle helmets were found to reduce all head injuries by 61% (95% confidence interval [CI], 10: +/? 10%) and AIS 2+ head injuries by 68% (95% CI, 12: +/? 12%). The effectiveness in reducing face injuries was lower (45% CI +/? 10% for all injuries and 54% CI +/? 32% for AIS2+ injuries).

Conclusions: This study indicated that bicycle helmets effectively reduce injuries to the head and face. The results thus point to the need for actions aimed at increasing helmet use, especially among teenagers. Protective measures are necessary to further reduce injuries, especially to the upper extremities.     

Back-extrapolation of estimates of exposure from current land-use regression models

Land use regression has been used in epidemiologic studies to estimate long-term exposure to air pollution within cities. The models are often developed toward the end of the study using recent air pollution data. Given that there may be spatially-dependent temporal trends in urban air pollution and that there is interest for epidemiologists in assessing period-specific exposures, especially early-life exposure, methods are required to extrapolate these models back in time. We present herein three new methods to back-extrapolate land use regression models. During three two-week periods in 2005–2006, we monitored nitrogen dioxide (NO₂) at about 130 locations in Montreal, Quebec, and then developed a land-use regression (LUR) model. Our three extrapolation methods entailed multiplying the predicted concentrations of NO₂ by the ratio of past estimates of concentrations from fixed-site monitors, such that they reflected the change in the spatial structure of NO₂ from measurements at fixed-site monitors. The specific methods depended on the availability of land use and traffic-related data, and we back-extrapolated the LUR model to 10 and 20 years into the past. We then applied these estimates to residential information from subjects enrolled in a case–control study of postmenopausal breast cancer that was conducted in 1996.Observed and predicted concentrations of NO₂ in Montreal decreased and were correlated in time. The estimated concentrations using the three extrapolation methods had similar distributions, except that one method yielded slightly lower values. The spatial distributions varied slightly between methods. In the analysis of the breast cancer study, the odds ratios were insensitive to the method but varied with time: for a 5 ppb increase in NO₂ using the 2006 LUR the odds ratio (OR) was about 1.4 and the ORs in predicted past concentrations of NO₂ varied (OR～1.2 for 1985 and OR～1.3–1.5 for 1996). Thus, the ORs per unit exposure increased with time as the range and variance of the spatial distributions decreased, and this is due partly to the regression coefficient being approximately inversely proportional to the variance of exposure. Changing spatial variability complicates interpretation and this may have important implications for the management of risk. Further studies are needed to estimate the accuracy of the different methods.     

On the Curing of ESO/MTHPA/DEH 35 and ESO/MTHPA/DEH 35/TIN

Journal of Polymers and the Environment - Epoxidized soybean oil (ESO) compounds were cured with methyl tetrahydrophthalic anhydride (MTHPA) as hardener and 2,4,6-tris (dimethylaminomethyl) phenol...     

Individual and combined effects of Ca/Mg ratio and water on trait expression in Mimulus guttatus

Low Ca/Mg ratios (a defining component of serpentine soils) and low water environmental conditions often co-occur in nature and are thought to exert strong selection pressures on natural populations. However, few studies test the individual and combined effects of these environmental factors. We investigated the effects of low Ca/Mg ratio and low water availability on plant leaf, stem, stolon, and floral traits of Mimulus guttatus, a bodenvag species, i.e., a species that occurs in serpentine and non-serpentine areas. We quantified genetic variation and genetic variation for plasticity for these leaf, stem, stolon, and floral traits at three hierarchical levels: field-habitat type, population, and family, and we evaluated the relative importance of local adaptation and plasticity. We chose two populations and 10 families per population from four distinct field "habitat types" in northern California: high Ca/Mg ratio (non-serpentine) and season-long water availability, high Ca/Mg ratio and seasonally drying, low Ca/Mg ratio (serpentine) and season-long water availability, and low Ca/Mg ratio and seasonally drying. Seedlings were planted into greenhouse treatments that mimicked the four field conditions. We only detected genetic variation for stem diameter and length of longest leaf at the field-habitat level, but we detected genetic variation at the family level for nearly all traits. Soil chemistry and water availability had strong phenotypic effects, alone and in combination. Our hypothesis of an association between responses to low water levels and low Ca/Mg ratio was upheld for length of longest leaf, stem diameter, corolla width, and total number of reproductive units, whereas for other traits, responses to Ca/Mg ratio and low water were clearly independent. Our results suggest that traits may evolve independently from Ca/Mg ratios and water availability and that our focal traits were not simple alternative measures of vigor. We found genetic variation for plasticity both at the field-habitat type and family levels for half of the traits studied. Phenotypic plasticity and genetic variation for plasticity appear to be more important than local adaptation in the success of these M. guttatus populations found across a heterogeneous landscape in northern California. Phenotypic plasticity is an important mechanism maintaining the broad ecological breadth of native populations of M. guttatus.     

Preliminary evaluation of septic-system absorption-field architecture types in a profile-limited soil

Managing household wastewater is an issue that affects hundreds of thousands of people in rural communities nationwide, many of whom rely on septic systems as their primary means of household wastewater disposal. Septic system absorption field products with architectures quite different from traditional pipe-and-gravel systems are being installed in many states with variances from initial design specifications. The objective of this study was to evaluate the performance, as measured by the in-product height of stored solution, of four differing absorption-field product architecture types in a profile-limited soil that was loaded at the maximum allowable rate based on soil morphology. Five chamber, two gravel-less pipe, two polystyrene aggregate, and four pipe-and-gravel systems were installed in a profile-limited, Captina silt loam soil (fine-silty, siliceous, active, mesic Typic Fragiudult) and dosed with raw effluent at rates determined by current State of Arkansas regulations via individual peristaltic pumps. Free-solution monitoring ports were installed within each product, where the depth to free solution was measured periodically and used to evaluate product performance. Data collected from January through August 2009 indicated that preliminary system performance was unaffected by product architecture type. All products performed similarly under dry soil conditions. However, differences among individual products were observed during periods of hydrologic stress (i.e., wet soil conditions). Surfacing of effluent was not observed atop any product, indicating that the current loading rate design method is functioning properly. Preliminary results indicate that some alternative absorption-field products perform similarly to the traditional pipe-and-gravel system, thus providing flexibility and options for homeowners.