Levels and trends of PCDD/Fs and PCBs in camel milk (Camelus bactrianus and Camelus dromedarius) from Kazakhstan

To date, despite the fact it represents a very important part of the national dairy production, no data are available concerning the concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), and polychlorinated biphenyls (PCBs) in camel milk from the Republic of Kazakhstan. Selected PCDDs, PCDFs, and PCBs were measured in pools of milk from camels (n=15) located in various places of Kazakhstan (Almaty, Atyrau, Aralsk, Shymkent) and sampled at two different seasons for two different species (Camelus bactrianus and Camelus dromedarius). Non-dioxin-like (NDL-)PCB concentrations (6.3±2.7 ng g(-1) fat, median 5.1 ng g(-1) fat, range 0.6-17.4 ng g(-1) fat) were far below the maximum value of 40 ng g(-1) fat proposed by the EU. Dioxin-like (DL-)PCB concentrations (1.7±0.7 ng g(-1) fat, median 1.5 ng g(-1) fat, range 0.3-4.2 ng g(-1) fat) and the NDL-PCB to DL-PCB ratio (4.3) were similar to what is reported in EU for cow-based dairy products. PCB 52 and PCB 101 appeared to be proportionally more present in Kazakh camel milk samples (>60% of the sum of the 6 indicator NDL-PCBs) than in European cow milk samples (<10% of the sum of the 6 indicator NDL-PCBs), indicating possible differences in the route of exposure to PCBs in Kazakhstan. PCB 105 and PCB 118 appeared to be present at higher concentrations in camel milk (>80% of the sum of the 12 DL-PCBs). PCB 105, PCB 118 and PCB 156 were the major congeners for DL-PCBs, accounting for 92% of the sum of concentrations of DL-PCBs (88% for Belgian cows). In terms of TEQ, PCB 126 and PCB 118 are the major contributors and represent, respectively, 80% and 14% of the DL-PCB TEQWHO05 concentrations. No significant interracial or geographical trends were observed for NDL- and DL-PCB profiles. However, concentrations of all DL-PCBs appeared to be significantly higher for samples collected in Atyrau region. 2,3,7,8-TCDD level (mean 0.08±0.07 pg g(-1) fat, median 0.08 pg g(-1) fat, range 0.00-0.18 pg g(-1) fat, 60%>LOQs) were very low for all samples and 2,3,4,7,8-PeCDF was the major contributor (27%) to the PCDD/F TEQWHO05. Considering the total TEQWHO05 (sum of DL-PCBs and PCDD/Fs), DL-PCB and PCDD/F contributed for 73% and 27%, respectively. A decrease of only 1% of the total TEQ was observed when using the TEFWHO05 scale instead of the TEFWHO98 scale. Two samples collected in the region of Atyrau exceeded the EU maximum level value of 6.00 pg TEQWHO98 g(-1) fat (6.4 pg TEQWHO05 g(-1) fat and 6.9 pg TEQWHO05 g(-1) fat). Both samples exceeded the EU action level for the sum of DL-PCBs. Based on the fact that camel milk is used to prepare popular traditional fermented drinks like shubat, this suggests that the human exposure in the Caspian Sea region of Atyrau should be expected to be higher than in the other regions studied here.     

Effect of topography on nitrous oxide emissions from winter wheat fields in Central France

We assessed nitrous oxide (N₂O) emissions at shoulder and foot-slope positions along three sloping sites (1.6–2.1%) to identify the factors controlling the spatial variations in emissions. The three sites received same amounts of total nitrogen (N) input at 170 kg N ha⁻¹. Results showed that landscape positions had a significant, but not consistent effect on N₂O fluxes with larger emission in the foot-slope at only one of the three sites. The effect of soil inorganic N (NH₄⁺ + NO₃⁻) contents on N₂O fluxes (r² = 0.55, p < 0.001) was influenced by water-filled pore space (WFPS). Soil N₂O fluxes were related to inorganic N at WFPS > 60% (r² = 0.81, p < 0.001), and NH₄⁺ contents at WFPS < 60% (r² = 0.40, p < 0.01), respectively. Differences in WFPS between shoulder and foot-slope correlated linearly with differences in N₂O fluxes (r² = 0.45, p < 0.001). We conclude that spatial variations in N₂O emission were regulated by the influence of hydrological processes on soil aeration intensity.     

Use of the MicroResp™ method to assess pollution-induced community tolerance to metals for lotic biofilms

Understanding the ecological status of aquatic ecosystems and the impact of anthropogenic contamination requires correlating exposure to toxicants with impact on biological communities. Several tools exist for assessing the ecotoxicity of substances, but there is still a need for new tools that are ecologically relevant and easy to use. We have developed a protocol based on the substrate-induced respiration of a river biofilm community, using the MicroResp™ technique, in a pollution-induced community tolerance approach. The results show that MicroResp™ can be used in bioassays to assess the toxicity toward biofilm communities of a wide range of metals (Cu, Zn, Cd, Ag, Ni, Fe, Co, Al and As). Moreover, a community-level physiological profile based on the mineralization of different carbon substrates was established. Finally, the utility of MicroResp™ was confirmed in an in-situ study showing gradient of tolerance to copper correlated to a contamination gradient of this metal in a small river.     

Combining polar organic chemical integrative samplers (POCIS) with toxicity testing to evaluate pesticide mixture effects on natural phototrophic biofilms

Polar organic chemical integrative samplers (POCIS) are valuable tools in passive sampling methods for monitoring polar organic pesticides in freshwaters. Pesticides extracted from the environment using such methods can be used to toxicity tests. This study evaluated the acute effects of POCIS extracts on natural phototrophic biofilm communities. Our results demonstrate an effect of POCIS pesticide mixtures on chlorophyll a fluorescence, photosynthetic efficiency and community structure. Nevertheless, the range of biofilm responses differs according to origin of the biofilms tested, revealing spatial variations in the sensitivity of natural communities in the studied stream. Combining passive sampler extracts with community-level toxicity tests offers promising perspectives for ecological risk assessment.     

Duration of paternal care in pine engraver beetles: why do larger males care less?

Male pine engravers, Ips pini (Coleoptera: Scolytidae), assist their mates during reproduction by removing the debris that accumulates while females excavate oviposition tunnels in the phloem tissue of host tree bark. Although duration of paternal care and male reproductive success are positively correlated, large males leave their mates and brood sooner than small males. We address two hypotheses to explain the earlier departure of larger males from their breeding galleries: (1) females oviposit most rapidly when paired with large males, thereby reducing the length of time that paternal care increases male reproductive success, (2) larger males have better prospects for future reproduction, and thus leave their galleries in search of new breeding opportunities sooner than smaller males. Contrary to the first hypothesis, when females were paired either with large or small males, there was no effect of male size on their rate of oviposition. Consistent with the second hypothesis, males that initiated breeding galleries were larger than males from the general population. In addition, large males flew farther and faster on flight mills than small males, which may indicate that large males have an advantage in locating suitable breeding sites. Thus, we suggest that large male pine engravers leave their galleries earlier than small males because large individuals have better prospects for future reproduction. Received: 30 November 1997 / Accepted after revision: 23 May 1998     

Do tubificid worms influence organic matter processing and fate of pollutants in stormwater sediments deposited at the surface of infiltration systems?

The purpose of this study was to quantify the influences of tubificid worms on the biogeochemical functioning of an infiltration system impacted by a stormwater sediment deposit. Effects of worms with stormwater sediment deposit were compared with effects of worms with two other natural sediment deposits (one low and one rich-particulate organic matter deposits). We measured the effects of invertebrates on sediment reworking, organic matter processing, solute fluxes, microbial characteristics, and pollutant release from stormwater deposit to water. Our results showed that tubificid worms had slight effects on microbial activities in presence of the stormwater deposit whereas they significantly stimulated microbial activities in columns impacted by the other two deposits. High contents of labile organic matter contained in stormwater sediments probably led to very strong microbial activities that could not be easily stimulated by worm activities. In our experimental conditions, no significant influence of tubificid worms on the fate of pollutants (heavy metals and PAHs) contained in the stormwater deposit was measured. In conclusion, our study demonstrated that the organic matter characteristics of the stormwater sediments limited the efficiency of tubificid worms to stimulate organic matter mineralization in infiltration systems.     

Bacteriological safety assessment,hygienic habits and cross-contamination risks in a Nigerian urban sample of household kitchen environment

Urban household kitchen environment was assessed for safety by determining their levels of indicator bacteria, hygienic habits and risk of cross-contamination. Household kitchens (60) were selected in Warri Town, Nigeria, by the multi-stage sampling technique. Contact surfaces, water and indoor kitchen air were analysed for aerobic plate counts, total and faecal coliforms using Nutrient and McConkey media by swab/rinse method, membrane filtration and sedimentation methods, respectively. Hygienic habits and risk of cross-contamination were assessed with structured questionnaire which included socio-demographic variables. On the basis of median counts, the prevalence of high counts (log cfu/cm²/m³/100 mL) of aerobic plate counts (>3.0), total coliforms (>1.0) and faecal coliforms (>0) on contact surfaces and air was high (58.0–92.0%), but low in water (30.0–40.0%). Pots, plates and cutleries were the contact surfaces with low counts. Prevalence of poor hygienic habits and high risk of cross-contamination was 38.6 and 67.5%, respectively. Education, occupation and kitchen type were associated with cross-contamination risk (P = 0.002–0.022), while only education was associated with hygienic habits (P = 0.03). Cross-contamination risk was related (P = 0.01–0.05) to aerobic plate counts (OR 2.30; CL 1.30–3.17), total coliforms (OR 5.63; CL 2.76–8.25) and faecal coliforms (OR 4.24; CL 2.87–6.24), while hygienic habit was not. It can be concluded that urban household kitchens in the Nigerian setting are vulnerable to pathogens likely to cause food-borne infections.     

Marine dredged sediments as new materials resource for road construction

Large volumes of sediments are dredged each year in Europe in order to maintain harbour activities. With the new European Union directives, harbour managers are encouraged to find environmentally sound solutions for these materials. This paper investigates the potential uses of Dunkirk marine dredged sediment as a new material resource for road building. The mineralogical composition of sediments is evaluated using X-ray diffraction and microscopy analysis. Since sediments contain a high amount of water, a dewatering treatment has been used. Different suitable mixtures, checking specific geotechnical criteria as required in French standards, are identified. The mixtures are then optimized for an economical reuse. The mechanical tests conducted on these mixtures are compaction, bearing capacity, compression and tensile tests. The experimental results show the feasibility of the beneficial use of Dunkirk marine dredged sand and sediments as a new material for the construction of foundation and base layers for roads. Further research is now needed to prove the resistance of this new material to various environmental impacts (e.g., frost damage).     

Measurement of transferable chemical residue from nylon carpet using the California roller and a new mega-California roller

Human chemical exposures resulting from transfer of surface deposition on indoor nylon carpets may be estimated by measuring transferable residues (mu g chemical/cm2 carpet). A weighted roller developed at California Department of Food and Agriculture (CDFA) has been extensively used to sample transferable residue for estimates of human exposure in risk characterization. A modified roller has been developed to evaluate the influence of pressure on transferable chemical residue since weight and force (or pressure, kg/m2) may vary person-to-person and activity-to-activity. A 30.5 cm diameter roller was used to apply 60 to 2100 kg/m2 to bracket pressures exerted by humans on a flat nylon-carpeted surface. Measurements of transferable cyfluthrin residues were made after 1, 7, and 21 days. Total Soxhlet extractable cyfluthrin residues were relatively constant during the test period. Residue transferability decreased during the study period. Modest increases in the transferability of surface residues were observed over the broad range of pressures applied by the modified roller.