Continuous in-line gasification/vitrification process for thermal waste treatment: process technology and current status of projects

The Thermoselect High Temperature Recycling process has been developed in order to make available a thermal waste treatment technology avoiding major problems as known from traditional techniques like landfills or ashes, filter dust and emission producing processes. It combines slow degassing with fixed bed oxygen blown gasification and mineral and metal residue melting in a closed loop system. Municipal, industrial and other kinds of waste are compacted to less than one fifth of their original volume by means of an armored hydraulic press, and then periodically pushed into an indirectly heated degasification channel. As the waste plugs are pushed down the channel in an oxygen-free environment, waste humidity is evaporated and the organic components in the refuse are partially degasified and to a certain extent converted into a carbon-like product as the temperature increases. This flaky product and the enclosed inorganic components such as metals and minerals are continuously fed into a high-temperature reactor (HTR). Pure oxygen is added in controlled quantities and reacts with the material following exothermic oxidisation reactions. Due to overall under-stoichiometric conditions, gasification products form a combustible synthesis gas. The heat of reaction leading to temperatures up to about 2000°C in the core of the lower HTR section acts to also smelt the metal and mineral components of the waste. Chlorinated hydrocarbons such as dioxins and furans are reliably destroyed along with other organic compounds in the gaseous and the liquid phase. Material conversion equilibria are assured due to high temperatures and sufficient residence times. The synthesis gas is purified before use as combustible or primary material. After long term operation of the industrial scale demonstration plant in northern Italy, recent orders of differently sized Thermoselect plants can be announced and are illustrated on the basis of three cases out of five [with Herten 225,000 Mg/a and Berlin 300,000 Mg/a] in Germany: (1) Karlsruhe plant, 3 lines, 225,000 Mg/a, under construction; (2) Ansbach plant, 1 line, 75,000 Mg/a, completely purchased in July 1997; (3) Hanau plant, 2 lines, 90,000 Mg/a, partially purchased in October 1997. The technical concepts of these projects are illustrated with special emphasis on the flexibility of tailor-made energy recovery solutions.     

Pointing accuracy in children is dependent on age, sex and experience

We investigated the influence of age, sex and familiarity on spatial performance assessed with a pointing task in 84 children: 21 kindergartners, 21 first-graders, 21 fifth-graders and 21 sixth-graders. Spatial performance was assessed in the children's natural environment, their respective school or kindergarten. The children had to indicate the direction of prominent landmarks on the school campus while sitting in their classroom, drawing an arrow on a sheet of paper. Since the children had spent different amounts of time at their respective schools, experience with the environment was regarded as a covariate.Data analysis revealed significant effects for age, sex and experience. Fifth-graders aged around 10 years outperformed the younger children. Sex differences revealed male superiority at all ages. Experience with the environment was also shown to play a vital role. Children who had spent a longer time at the school were able to demonstrate better spatial knowledge by pointing more accurately towards unseen landmarks.     

Growth of Lygeum spartum in acid mine tailings: response of plants developed from seedlings, rhizomes and at field conditions

Lygeum spartum is a native species in semiarid Mediterranean areas that grows spontaneously on acid mine tailings. We aimed to study the suitability of this plant for phytostabilization. L. spartum was grown from both seeds and rhizomes in acid mine tailings with various fertilizer and lime treatments. Untreated soils had a solution pH of 2.9 with high concentrations of dissolved salts (Electrical Conductivity 25 dS m(-1)) and Zn (3100 mg L(-1)). Plants grown on untreated soil had high shoot metal concentrations (>4000 mg kg(-1)Zn). Liming increased the solution pH to 5.5 and reduced the dissolved salts by more than 75%, resulting in lower shoot metal accumulation. Plants grown from rhizomes accumulated less metal than those grown from seeds. Plants collected in the field had metal concentrations an order of magnitude less than plants raised in the growth chamber. These differences may be due to the higher moisture content and homogeneous nature of the soils used in the pot experiment.     

Invasion costs,impacts, and human agency: response to Sagoff 2020

Article impact statement: In an era of profound biodiversity crisis, invasion costs, invader impacts, and human agency should not be dismissed.     

Humanarzneimittel im aquatischen Ökosystem

Goal

In the Brandenburg State Office for the Environment an approach to assess the potential risk of drug residues in aquatic ecosystems has been developed based on an investigation of the consumption amounts in 1999 to identify or to exclude a potential environmental risk of important human drugs and further to define priority substances for monitoring programs in Brandenburg in the future.

Method

This assessment approach tested with 60 drug agents is based on an exposure estimation considering the main path for the entry human—waste water—sewage plant—surface water, on a substance specific analysis of effects and on an analysis of the environmental fate as compartment distribution, bioaccumulation and persistence.

Results

In Brandenburg surface waters the drug agent concentration for eight of the considered substances is supposed to be greater than 1 μg/l and for at least 13 of the considered substanoes the PNEC in aquatic ecosystems is assumed to be lower than 1 μg/l. A potential risk for the environment can be seen for the antibiotics Ciprofloxacin-HCl and Clarithromycin, the disinfectants Benzalkonium Chloride, Cocospropylendiaminguaniacetat, Glucoprotamine, Laurylpropylenediamine and Polyvidone-iodine, the sexual hormon Ethinylestradiol, the antidiabetic Metformin-HCl, the antiepileptic Carbamazepine and the lipid regulator Clofibrinic acid on the basis of effects because their PEC:PNEC-relation is about 1 or higher. For further 19 drug agents an environmental risk is to be assumed because of their environmental behaviour without support by ecotoxicological data at present.

Conclusion

Although there is only a small base of valid ecotoxicological data, this risk assessment shows that adverse effects in the aquatic environment by some drug agents cannot be excluded. However, it should be noted that this first assessment gives only a crude orientation. Appropriate test data are necessary to refine the assessment in future.     

Moosmonitoring als Spiegel der Landnutzung?

Goal, Scope and Background

The study was conducted to test the hypothesis that the regional variability of nitrogen (N) and metal accumulations in terrestrial ecosystems are due to historical and recent ways of land use. To this end, in two regions of Central Europe the metal and N accumulations in both regions should be examined by comparative moss analysis. The regions should be of quantitatively specified representativity for selected ecological characteristics of Europe. Within both regions these characteristics should be covered by the sites where the moss samples were collected. The number of samples should allow for geostatistical estimation of the measured nitrogen and metal loads.

Methods

The two regions of investigation were selected according to an ecological land classification of Europe which was computed by classification trees. Within each of both research areas the sampling points were localized according to the areas occupied by the ecologically defined land classes. The sampling and chemical analysis of mosses was conducted in accordance with an appropriate UNECE guideline by means of ICP-MS (metals) and combustion analysis (N). The quality of measurements was assured using certified reference materials. The differences of deposition loads were tested for statistical significance with regard to time and space. Variogram analysis was used to examine and model the spatial autocorrelation function of the measurements. Ordinary kriging was then applied for surface estimations.

Results

By use of the ecological regionalisation of Europe the Weser-Ems Region (WER) and the Euro Region Nissa (ERN) were selected for investigation. The sampling sites represent quite well the natural landscapes and the land use categories of both regions. The measurement values corroborate the decline of metal accumulation observed since the beginning of the European Mosses Monitoring Survey in 1990. The metal loads of the mosses in the ERN exceed those in the WER significantly. The opposite holds true for the N concentrations: those in the WER are significantly higher than those in the ERN.

Discussion

The decrease of heavy metal emissions is correlated with lowered deposition and accumulation rates in terrestrial ecosystems. The accumulation of nitrogen in the biosphere is not following this trend.

Conclusions

The technique of moss analysis is adequate for spatially valid biomonitoring of spatial and temporal trends of metals and nitrogen in terrestrial ecosystems. By this, it enables to prove the efficiency of environmental policies.

Recommendations and Perspectives

The accumulation of N in ecosystems is still a serious environmental problem. Related ecological impacts are the eutrophication of aquatic ecosystems like ground waters, lakes, rivers and oceans as well as the biocoenotic changes in terrestrial ecosystems. Thus, a statistically valid exposure analysis must encompass both, accumulation of metals and N bioaccumulation. Further, the bioaccumulation of persistent organic pollutants should be monitored. Finally, environmental biomonitoring should be conducted in much closer contact with human health aspects.     

An advanced study on the hydrometallurgical processing of waste computer printed circuit boards to extract their valuable content of metals

This study refers to two chemical leaching systems for the base and precious metals extraction from waste printed circuit boards (WPCBs); sulfuric acid with hydrogen peroxide have been used for the first group of metals, meantime thiourea with the ferric ion in sulfuric acid medium were employed for the second one. The cementation process with zinc, copper and iron metal powders was attempted for solutions purification. The effects of hydrogen peroxide volume in rapport with sulfuric acid concentration and temperature were evaluated for oxidative leaching process. 2 M H₂SO₄ (98% w/v), 5% H₂O_2, 25 °C, 1/10 S/L ratio and 200 rpm were founded as optimal conditions for Cu extraction. Thiourea acid leaching process, performed on the solid filtrate obtained after three oxidative leaching steps, was carried out with 20 g/L of CS(NH₂)₂, 6 g/L of Fe³⁺, 0.5 M H₂SO₄, The cross-leaching method was applied by reusing of thiourea liquid suspension and immersing 5 g/L of this reagent for each other experiment material of leaching. This procedure has lead to the doubling and, respectively, tripling, of gold and silver concentrations into solution. These results reveal a very efficient, promising and environmental friendly method for WPCBs processing.     

Distributions and sources of polycyclic aromatic hydrocarbons in surface sediments from the Cross River estuary,S.E. Niger Delta,Nigeria

Polycyclic aromatic hydrocarbon (PAH) analyses of surface sediments from the Cross River estuary by gas chromatography–mass spectrometry indicated natural diagenetically derived PAHs in the upper estuary, with minor and variable amounts of petrogenic and combustion-derived PAHs from human activities (lower estuary). The occurrence of significant amounts of perylene (average 23% of all PAHs) with the diagenetic natural PAHs in the middle estuary bordered by mangrove forests supports its origin from terrestrial organic matter. The natural PAHs represent the highest percentage (average 76%) of the total PAHs in this tropical environment. The traditional geochemical parameters, including the petrogenic PAHs, confirmed trace petroleum contamination in the estuary. Specific PAH ratios such as Fl/Py and Fl/(Fl+Py) also support this source contribution.     

Energy at work: A measurement validation and linkage to unit effectiveness

We introduce the notion that the energy of individuals can manifest as a higher‐level, collective construct. To this end, we conducted four independent studies to investigate the viability and importance of the collective energy construct as assessed by a new survey instrument—the productive energy measure (PEM). Study 1 (n = 2208) included exploratory and confirmatory factor analyses to explore the underlying factor structure of PEM. Study 2 (n = 660) cross‐validated the same factor structure in an independent sample. In study 3, we administered the PEM to more than 5000 employees from 145 departments located in five countries. Results from measurement invariance, statistical aggregation, convergent, and discriminant‐validity assessments offered additional support for the construct validity of PEM. In terms of predictive and incremental validity, the PEM was positively associated with three collective attitudes—units' commitment to goals, the organization, and overall satisfaction. In study 4, we explored the relationship between the productive energy of firms and their overall performance. Using data from 92 firms (n = 5939_employees), we found a positive relationship between the PEM (aggregated to the firm level) and the performance of those firms. Copyright © 2011 John Wiley & Sons, Ltd.