Fukushima fallout in Northwest German environmental media

Traces of short- and long-lived fallout isotopes (¹³¹I, ¹³⁴Cs and ¹³⁷Cs) were found in environmental samples collected in Northwest Germany (rain water, river sediment, soil, grass and cow milk) from March to May 2011, following the radioactivity releases after the nuclear accident in Fukushima, Japan. The measured concentrations are consistent with reported concentrations in air, amount of rainfall and expected values applying simple radioecological models. The [¹³⁴Cs]/[¹³⁷Cs] ratio reported for air (about 1) allows for discrimination between “recent” and “old” ¹³⁷Cs. Expected ¹³⁶Cs values fell below the detection limits of the instrumentation, despite large sample masses and long counting times.     

Formation of chlorinated disinfection by-products in viticulture

Background, aim and scope  The use of sodium hypochlorite (HYP) in viticulture results in effluents which are contaminated with halogenated substances. These disinfection by-products (DBPs) can be quantified as group parameter ‘adsorbable organic halogens’ (AOX) and have not been determined in effluents of viticulture yet. The substances that are detected as AOX are unknown. The AOX can be composed of harmless substances, but even toxic contaminants. Thus, it is impossible to assess ecological impacts. The aim of this study is to determine the quantification of AOX and DBPs after the use of HYP. This will be helpful to reduce environmental pollution by AOX. Materials and methods  The potential of HYP to generate AOX was determined in laboratory-scale experiments. Different model solutions were treated with HYP according to disinfection processes in viticulture and conditions of AOX formation in effluents were simulated. AOX were quantified using the flask-shaking method and identified DBPs were investigated by gas chromatography–mass spectrometry. Results  Treatment with HYP resulted in the formation of AOX. The percentage conversion of HYP to AOX was up to 11%. Most important identified DBPs in viticulture are chloroform, dichloroacetic acid and trichloroacetaldehyde. In addition, the formation of carbon tetrachloride (CT), 1,1,1-trichloropropanone, 2,4-dichlorobenzoic acid and 2-chloro-/2,4-dichlorophenylacetic acid was investigated. It was demonstrated that reaction temperature, concentration of HYP and type of organic matter have important influence on the formation of chlorinated DBPs. Discussion  The percentage conversion of HYP to AOX was similar to other published studies. Although a correlation of single compounds and AOX is difficult, chloroform was the predominant AOX. Generation of the volatile chloroform should be avoided due to possible adverse effects. The generation of dichloroacetic acid is of minor importance on account of biodegradation. Trichloroacetaldehyde and 1,1,1-trichloropropanone are weak mutagens and their formation should be avoided. Conclusions  The generation of AOX and chlorinated DBPs can be minimised by reducing the concentrations of the organic materials in the effluents. The removal of organic matter before disinfection results in a decreased formation of AOX. HYP is an effective disinfectant; therefore, it should be used at low temperatures and concentrations to reduce the amount of AOX. If possible, disinfection should be accomplished by the use of no chlorine-containing agents. By this means, negative influences of HYP on the quality of wine can also be avoided. Recommendations and perspectives  Our results indicate that HYP has a high potential to form AOX in effluents of viticulture. The predominant by-products are chloroform, dichloroacetic acid and trichloroacetaldehyde. In further research, wastewaters from a winery and the in- and outflows of two sewage treatment plants were sampled during vintage and analysed. These results will be discussed in a following paper.     

Applied waste-free recovery of methanol

In this paper, we present applied methanol recycling technology utilising Chromatographic applications, which has been designed for an academic-size institution. The procedure is combined out of proper recovery technique and the biodegradation method intended for postprocessing residues. Additionally, analytical methods controlling the quality of the process are described in detail in order to enable full transfer of the proposed methodology to the analogous institution. The recovered solvent is of relatively high purity (> 99.92%), containing traces of water and volatile compounds. The spectral purity is sufficient to employ recycled methanol in HPLC applications where low wayelength detection is necessary. Biodegradation of distillation first-cuts and still bottoms is implemented using isolated strains ofMethylobacterium organophilum. During the biodegradation process, a series of carotenoids are biosynthesized, which are of a high commercial value. The proposed application, therefore, offers not only a sustainable, waste-free solution in handling methanol waste, but can also serve as a potential source of value.     

Biological responses of workplace particles and their association with adverse health effects on miners

Epidemiological research has demonstrated the relationship between exposure to quartz dust and an elevated risk of pneumoconiosis and possible elevated risk of cancer. The current study was designed to evaluate the biological responses of workplace particles containing crystalline silica using an in vitro cell test. Respirable particle samples were sampled from four tin mines, where the standardized mortality ratio (SMR) for pneumoconiosis was 51.6 and SMR for lung cancer was 2.2 in dust-exposed miners. Alveolar macrophages (AM) are considered as the target cells for primary dust effects. The samples were then measured at 15, 30, 60 and 120 microg particle per 10(6) AM for cytoxicity with the release of glucuronidase, lactate dehydrogenase, for reactive oxygen damage with H(2)O(2) release, and for ability to induce fibrosis using the secretion of tumor necrosis factor-alpha (TNF-alpha). Pure quartz (DQ12) and corundum were used as controls. The results showed the samples from tin mines caused a higher cytoxicity when compared to corundum, yet lower when compared to quartz. However, reactive oxygen species release (148-177 nmol/3 x 10(5) AM in high concentration of 120 microg/10(6) AM) induced by the samples were significantly higher than that induced by quartz (57 nmol/3 x 10(5) AM) and corundum (62 nmol/3 x 10(5) AM). Furthermore, particle samples induced higher TNF-alpha secretion than corundum, the samples from Limu tin mine induced much higher TNF-alpha levels than that induced by DQ12 quartz. The results from the in vitro tests help elucidate the degree of hazard of dust particles in tin mines. The in vitro reaction patterns of AM also constitute a powerful tool to monitor biological and pathogenic responses of humans following dust particle exposure.     

Ein Moosbiomonitoring zur Ermittlung atmosph?rischer Elementeintr?ge in die Euroregion Nei?e (D, PL, CZ)

Zusammenfassung  Durch ein Moosbiomonitoring sollte die H?he und die Verteilung der atmosph?rischen Deposition von 37 Elementen in der Euroregion Nei?e (ERN) nach den politischen und wirtschaftlichen Ver?nderungen erfasst und mit anderen Regionen verglichen werden. Weiterhin sollten die Akkumulationseigenschaften vonPleurozium schreberi undPolytrichum formosum, den in dieser Studie verwendeten Moosarten, miteinander verglichen werden. Bis Anfang der 90er Jahre war diese Region Teil des “Schwarzen Dreiecks”, das sich durch eine extrem hohe atmosph?rische Staubbelastung auszeichnete. Durch die Schlie?ung zahlreicher Betriebe, der Ausrüstung der Kraftwerke mit Filteranlagen, der abnehmenden Bedeutung der Braunkohle als h?uslicher Energietr?ger ver?nderte sich die Situation drastisch. Die Elementkonzentrationen in den Moosen der ERN lassen sich heute mit denen der alten Bundesl?nder vergleichen. Lediglich für Fe und Ti konnten deutlich h?here Gehalte ermittelt werden. Dies ist auf den h?heren Anteil der Braunkohle als Energietr?ger zurückzuführen. In der Region um Katowice in Oberschlesien konnten für einige Elemente mehr als 10 fach h?here Gehalte in den Moosen als in der ERN ermittelt werden. Das Oberschlesische Industrierevier weist eine derart hobe atmosph?rische Belastungen auf, dass hier ein dringender Handlungsbedarf besteht. Online-First: 21. Juni 2000     

Effects of sterile storage,cation saturation and substrate additions on the degradability and extractability of nonylphenol and phenanthrene in soil

The main objective of this study was to determine the effects of long-term abiotic processes during aging of organic pollutants in soil on their microbial degradability and formation of non-extractable residues. The specific aims of our study were to investigate how the fate of p353-nonylphenol (NP) and phenanthrene (Phe) in soils might be affected by: (i) saturation of soil by cations with different valency (Na⁺, Ca²⁺ or Al³⁺), (ii) addition of organic substrate (wood flour) during incubation period and (iii) different soil moisture levels.     

Physical Modeling of Emissions from Naturally Ventilated Underground Parking Garages

The dispersion of pollutants from naturally ventilated underground parking garages has been studied in a boundary layer wind tunnel. Two idealized model setups have been analysed, one was simulating pollutant dispersion around an isolated rectangular building and one was representing dispersion in a finite array of idealized building blocks. Flow and dispersion close to modelled ground level emission sources was measured. The results illustrate the complexity of the flow around buildings and provide insight in pollutant transport from ground level sources located directly on building surfaces. As a result, areas critical with respect to high pollutant concentrations could be visualized. Particularly, the results show high concentration gradients on the surface of the buildings equipped with modelled emission sources. Inside the boundary layers on the building walls, a significant amount of pollutants is transported to upwind locations on the surface of the building. The paper documents the potential of physical modelling to be used for the simulation and measurement of dispersion close to emission sources and within complex building arrangements.     

Das Biologische System der Elemente (BSE): Eine modelltheoretische Betrachtung zur Essentialität von chemischen Elementen

The correlation of data on the elements obtained by instrumental chemical analysis of highly representative plant samples led to the establishment of a first Biological System of Elements (BSE) in 1994. Including other physiological parameters like availability of chemical elements, transport, storage, etc. it is clear, that aside from the bioinorganic aspects of coordination chemistries of given elements, features of essentiality or toxicity depend on their interference with enzymatic processes. Notably, the latter are not to be considered as purely catalytic transformations, but are instead related to the reproduction of organisms in a direct or indirect manner — as autocatalytic: a process whereby a protein containing some metal or burdened in function by its presence is indirectly involved in its own reproduction. Stoichiometric Network Analysis (SNA) explicitly deals with the general dynamics of such autocatalytic systems. Given there is a relationship between the kinds of metal or metalloid species and the key biological/biochemical transformations to be promoted using them — a relationship which is the topic of bioinorgnaic chemistry-, and that biochemistry is in effect about systems which can reproduce and thus behave autocatalytically, one can expect SNA to yield statements on the basic features of biology and biochemistry as well.     

Biomonitoring zur wirkungsbezogenen Ermittlung der Schadstoffbelastung in terrestrischen Ökosystemen

Biomonitoring programmes provide relevant information, which may supplement ambient air pollution monitoring or modelling around emission sources. As a prerequisite, assessment scales for biomonitoring data have to be derived based on an objective evaluation of available data, as well as on a scheme of presentation, which is suggestive and easily understandable even for laymen. Based on an evaluation of numerous monitoring programmes, assessment scales for biomonitoring results are derived for plant biomonitoring, which also serve as a basis for the graphical presentation of monitoring results. This study is focussed on bioindicator plants like mosses (passive biomonitoring) and exposed lichens (active biomonitoring), in which 14 metal elements are investigated. As an example, data from a local biomonitoring network around a cement plant were used to demonstrate the use of the assessment scales derived and the presentation scheme developed. Data sets from about 15 moss and 24 lichen biomonitoring programmes, comprising more than 1000 specimens, were sorted by their pollutant characteristics in order to form the database. Data on the metal contents of species demonstrating similar values with respect to growth characteristics and habit, and representing background or low pollution levels, are aggregated and their statistical distributions are evaluated. Spacing of the assessment scales and their colour designations are derived from the 50-, 75-, 90- and 95-percentile values. Graphical presentation allows a comparison of the absolute values of metal contents and a relative association of measured values. Exemplary results from moss and lichen monitoring around a cement plant are generally below or slightly above the median values at background and low-pollution sites. Metal contents are higher in lichens compared to mosses for 7 elements (Cd, Cu, Hg, Pb, Sb, Sn, Zn), and are lower in lichens only for thallium. The assessment scheme presented is mainly aimed at the practitioner in the field of biomonitoring in order to provide a reliable and sound scale of assessment by comparison on an absolute scale rather than presenting the basis of ecological risk assessment. Differences in metal content of co-located samples of various moss species and possible correction procedures are briefly discussed- as well as the consequences of pooling monitoring data across various moss species for the quality of assessment scales. Further evaluations shall focus on species-specific rather than on pooled databases and will investigate the consequences of the use of correction factors when extrapolating metal data from one monitoring species to another.     

Analysis of perfluorooctanoate (PFOA) and other perfluorinated compounds (PFCs) in the River Po watershed in N-Italy

C7-C11 perfluorinated carboxylates (PFACs) and perfluorooctansulfonate (PFOS) were analysed in selected stretches of the River Po and its major tributaries. Analyses were performed by solid-phase extraction (SPE) with Oasis HLB cartridges and methanol elution followed by LC-MS-MS detection using 13C-labelled internal standards. High concentration levels ( approximately 1.3 microg l(-1)) of perfluorooctanoate (PFOA) were detected in the Tánaro River close to the city Alessandria. After this tributary, levels between 60 and 337 ng l(-1) were measured in the Po River on several occasions. The PFOA concentration close to the river mouth in Ferrara was between 60 and 174 ng l(-1). Using the river discharge flow data in m3 s(-1) at this point (average approximately 920 m3 s(-1) for the year 2006), a mass load of approximately 0.3 kg PFOA per hour or approximately 2.6 tons per year discharged in the Adriatic Sea has been calculated. PFOS concentration levels in the Po River at Ferrara were approximately 10 ng l(-1).