吸附铅、镉固定化细菌胞壁多糖小球包埋条件的优化选择

细菌已广泛应用于重金属废水的处理,多糖则是细胞壁的主要成分,并通过螯合作用吸附重金属,而固定化技术具有处理效率高,生产成本低等优势。采用正交实验法,以聚乙烯醇和海藻酸钠为包埋剂,同时添加活性炭,硅藻土等对细菌胞壁多糖进行固定化,并以吸附铅、镉能力为主要考察指标,同时从机械强度、传质性、耐酸性等方面综合考虑,选择最优化的固定化小球最佳配方。结果表明,在聚乙烯醇、海藻酸钠、活性炭、硅藻土、多糖、二氧化硅和饱和硼酸中氯化钙的质量分数分别为10%、0.2%、1.5%、1.5%、0.8%、4%、3%,胶联时间为16h,己二胺浓度为0.06mol?L-1的条件下制得的固定化小球对铅、镉吸附的能力较强,并按照最佳配方进行了验证实验,对铅的吸附量达到4.4575μmol?g-1,对镉的吸附量达到4.1708μmol?g-1,机械强度、传质性和耐酸性都较好。     

苏州河市郊段底泥中COD_(Cr)和NH_3-N的空间分布特征

对苏州河截流区外河段(城郊段)东大盈河口—北新泾,按河道形态,支流与城镇分布等因素,沿程采集24个底泥柱样,测定其不同部位不同深度底泥中COD_(Cr)和NH_3-N含量,分析COD_(Cr)和NH_3-N在沿程和垂向上的分布特征及其成因。结果表明,底泥中污染沿程分布呈不规则波状起伏,东大盈河、蕴藻浜、盐铁塘、封浜、华漕港、新槎浦等支流口,浮泥层中COD_(Cr)含量达2万mg/kg,超过背景值2—3倍,支流口下游200m范围内均较高;黄渡小支流口、华漕港支流口浮泥层中NH_3-H含量达250mg/kg,超过背景值3倍。在垂向分布上,底泥柱样都出现峰值分布,在某些弯道及支流口出现递减分布。底泥耗氧污染程度主要与支流及其排污量有关,其次是弯道凸岸处污染物易于沉积富集。这为苏州河市郊段环境综合治理、底泥疏浚和处置提供了科学依据。     

Removal and pre-concentration of phenolic species onto beta-cyclodextrin modified poly(hydroxyethylmethacrylate-ethyleneglycoldimethacrylate) microbeads

Poly(Hydroxyethylmethacrylate-Ethyleneglycoldimethacrylate), poly(HEMA-EGDMA), microbeads with 150-200 microm in size, was prepared by suspension polymerization. Beta-cyclodextrin was modified onto the polymeric microbeads using glutaraldahyde activation in an acidic medium at pH=2.5. FT-IR and TGA were used for the characterization of modified polymers and the determination of the nature of the interaction between phenolic compounds and the modified polymeric microbeads. Plain and beta-cyclodextrin modified microbeads were used in adsorption-desorption studies of phenolic species in single solution. Adsorption capacities of the phenolic species onto the plain microbeads were found to be 28.2, 17.0, 14.3, 9.8, and 1.92 mg/g polymer for o-chloro phenol, p-nitro phenol, p-chloro phenol, o-nitro phenol, and phenol, respectively. However, for beta-cyclodextrin modified microbeads, adsorption capacity of phenolic species was determined as 274, 365, 128, 182, and 87 mg/g for phenol, o-nitro phenol, p-nitro phenol, o-chloro phenol, and p-chloro phenol, respectively. Desorption ratio for the phenolic species was more than 90%, except for o-nitro phenol. Detection limits of the phenolic species were improved at least 500-fold for UV-Vis spectrophotometric detection, after the pre-concentration of all phenolic species used in this study. Adsorption time for the phenolic species onto beta-cyclodextrin-modified poly(HEMA-EGDMA) microbeads was found to be reasonable short (10-60 min) and suitable for the applications. Also, synthesized microbeads were useful for the repeated use for the removal and pre-concentration of phenolic species.     

啤酒生产废水处理设计及运行研究

分析了年产15万t啤酒的生产废水情况,介绍了采用IC厌氧反应器-一体化氧化沟处理该生产废水(7 200 m3/d)的工艺路线和主要设计参数,讨论了废水处理系统的运行情况.其中IC厌氧反应器的HRT为8 h,运行温度为35～37 ℃;一体化氧化沟包括氧化沟段和沉淀池段,总尺寸为40 m×24 m×6 m.IC厌氧反应器COD容积负荷在7.78 kg/(m3·d)时,COD去除率为84%左右.整套废水处理系统的COD总去除率为98%左右,出水COD小于80 mg/L.厌氧所产生的沼气可用于废水的升温.     

Gas- and particulate-phase specific tracer and toxic organic compounds in environmental tobacco smoke

Cigarette smoke constituents are worthy of concern and characterized as carcinogens. Different experiment conditions may affect the environmental tobacco smoke (ETS) constituents. A study was undertaken in a 75.5-m3 spare office to evaluate ETS constituents in a real environment. Thirty-four volatile organic compounds (VOCs) including three ETS tracers: nicotine, 2,5-dimethylfuran and 3-ethenylpyridine (3-EP), 19 carbonyl compounds, 54 semi-volatile compounds (24 polycyclic aromatic hydrocarbons (PAHs) and 30 alkanes) as well as CO and total particulate matter (TPM) from 15 leading commercial brands were determined. ETS constituents did not increase with increasing cigarette tar. ETS tracers nicotine and 3-EP were affected greatly due to more sorption and surface reactions in real world compared to other studies conducted in chamber, which resulted in 2-5 times lower. Benzene, toluene, ethylbenzene, xylenes, acrolein, 2-butanone and the high molecular weight compounds exhibited little affect. Pearson correlation analyses show that gas-phase and particulate-phase ETS tracers did not show significant correlation, but within each homologue many of compounds correlated significantly. Indole and cholesta-3,5-diene were also detected in ETS. These results may be useful in efforts to better understand the health effect of ETS exposure and source apportionment.     

北京森林土壤富里酸亚组分的表征及荧光指标分析

为探究土壤FA（富里酸）的结构组成及其腐殖化和芳香性特征,采用SFS（同步荧光光谱）技术结合FRI（荧光区域积分）、DSFS（导数荧光光谱）及PCA（主成分分析）对土壤FA亚组分的荧光光谱特征及荧光指标间的相关性进行了分析.利用XAD-8吸附树脂结合初始pH为3、5、7、9和13的Na₄P₂O₇（焦磷酸钠）缓冲溶液逐步洗脱技术将土壤FA分别分级得5种亚组分（FA₃、FA₅、FA₇、FA₉和FA₁₃）.结果表明:①FA₃-FA₁₃的SFS体现3类荧光峰,分别代表类蛋白、类富里酸和类腐殖酸物质.FA₃和FA₅含有含量相近的类蛋白、类富里酸和类腐殖酸物质,而FA₇-FA₁₃含有的主要成分是类蛋白物质;同时,FA₇-FA₁₃的类富里酸和类腐殖酸较FA₃和FA₅更为复杂,且FA₇-FA₁₃含有更多易降解的单环芳香族化合物.②FA₃和FA₅的类酪氨酸和类色氨酸物质被识别,且FA₇-FA₁₃的类色氨酸含量明显大于类富里酸和类腐殖酸含量.③FA₃-FA₁₃光谱荧光强度指标（I₂₄₀/I₃₄₀、I₂₄₀/I₄₅₀、I₃₄₀/I₂₇₀、I₄₅₀/I₂₇₀和I₄₅₀/I₃₄₀）的对比分析表明,FA₃和FA₅的腐殖化程度和芳香性均大于FA₇-FA₁₃.④荧光指标A_FLR/A、A_HLR/A、S_270-340、S_270-450、A₂/A₁和A₃/A₁可作为指示亚组分芳香性的优化指标,且A_HLR/A、A₂/A₁和A₃/A₁可作为最佳指标反映亚组分的腐殖化程度.研究显示,土壤FA亚组分的结构表征及荧光指标分析为后续FA亚组分与环境污染物相互机理研究提供依据,为探究有机质的结构特性和环境行为提供理论支撑.      

黄河兰州段沉积物对水体中萘的吸附行为及影响

为研究典型有机污染物在黄河兰州段沉积物的吸附规律及影响,以黄河兰州段的沉积物为供试样品,选择萘（naphthalene）为代表性有机污染物,采用批量试验法研究了污染物萘在黄河沉积物上的吸附动力学、吸附热力学、初始质量浓度、pH、离子强度、粒径等影响因素以及解吸动力学.结果表明:黄河沉积物对萘的吸附动力学更符合准二级动力学模型,且吸附过程主要分为快吸附（0~4 h）和慢吸附（4~8 h）两个阶段,在8 h左右达到平衡;Freundlich模型能较好地拟合热力学吸附特征.在25~45℃的温度范围内,E（吸附平均自由能）为0.288~0.316 kJ/mol（< 8 kJ/mol）,吸附过程中,ΔGθ（吉布斯自由能）小于0,ΔSθ（熵变）与ΔHθ（焓变）均大于0,说明萘在黄河沉积物上的吸附是一个自发的混乱度增大的吸热过程,且以物理吸附为主.影响因素分析结果显示,随着沉积物粒径的增大,萘在其上的吸附量逐渐减小;增大吸附体系中的离子强度时,萘在沉积物上的吸附过程受到抑制;当萘初始浓度增大时,吸附量增加;酸性条件抑制吸附过程,碱性环境促进吸附过程;黄河沉积物对萘的解吸量远小于吸附量,存在解吸滞后现象.研究显示,萘在黄河沉积物中的吸附速率受内部扩散、表面吸附和液膜扩散的共同影响,并且吸附过程同时受到沉积物粒径和溶液的pH和离子强度的影响.      

Particulate matter pollution in Kunshan High-Tech zone: Source apportionment with trace elements, plume evolution and its monitoring

Particulate matter(PM) in the Kunshan High-Tech zone is studied during a three-month campaign. PM and trace elements are measured by the online pollution monitoring, forecastwarning and source term retrieval system AS3. Hourly measured concentrations of PM_(10), PM_(2.5) and 16 trace elements in the PM_(2.5) section(Ca, Pb, Cu, Cl, V, Cr, Fe, Ti, Mn, Ni, Zn, Ga, As, Se, Sr, Ba)are focused. Source apportionment of trace elements by Positive Matrix Factorization modeling indicates that there are five major sources, including dust, industrial processing, traffic,combustion, and sea salt with contribution rate of 23.68%, 21.66%, 14.30%, 22.03%, and 6.89%,respectively. Prediction of plume dispersion from concrete plant and traffic emissions shows that PM_(10) pollution of concrete plant is three orders of magnitude more than that of the traffic. The influence range can extend to more than 3 km in 1 hr. Because the footprint of the industrial plumes is constantly moving according to the local meteorological conditions, the fixed monitoring sites scattered in a few hundred meters haven't captured the heaviest pollution plume at the local scale of a few km~2. As a more intensive monitoring network is not operationally possible, the use of online modeling gives accurate and quantitative information of plume location, which increases the spatial pollution monitoring capacity and improves the understanding of measurement data. These results indicate that the development of the AS3 system, which combines monitoring equipment and air pollution modeling systems, is beneficial to the real-time pollution monitoring in the industrial zone.     

A green method to synthesize flowerlike Fe(OH)3 microspheres for enhanced adsorption performance toward organic and heavy metal pollutants

Dyestuffs and heavy metal ions in water are seriously harmful to the ecological environment and human health.Three-dimensional(3 D) flowerlike Fe(OH)_3 microspheres were synthesized through a green yet low-cost injection method,for the removal of organic dyes and heavy metal ions.The Fe(OH)_3 microspheres were characterized by thermal gravimetric analysis(TGA),Fourier transform infrared(FT-IR),and transmission electron microscopy(TEM) techniques.The adsorption kinetics of Congo Red(CR) on Fe(OH)_3 microspheres obeyed the pseudo-second-order model.Cr~(6+) and Pb~(2+) adsorption behaviors on Fe(OH)_3 microspheres followed the Langmuir isotherm model.The maximum adsorption capacities of the synthesized Fe(OH)_3 were 308,52.94,and 75.64 mg/g for CR,Cr~(6+),and Pb~(2+) respectively.The enhanced adsorption performance originated from its surface properties and large specific surface area of 250 m~2/g.The microspheres also have excellent adsorption stability and recyclability.Another merit of the Fe(OH)_3 material is that it also acts as a Fenton-like catalyst.These twin functionalities(both as adsorbent and Fenton-like catalyst) give the synthesized Fe(OH)_3 microspheres great potential in the field of water treatment.     

Electricity price subsidy or carbon-trading subsidy: which is more efficient to develop photovoltaic power generation from a government perspective?

Photovoltaic (PV) power generation has high investment costs and long payback periods. Therefore, during early deployment, subsidies are fundamental and necessary to accelerate its development. We consider the question of how to promote PV industry development and which supporting policy is more efficient in accelerating adoption. Based on real options method, we establish a subsidy efficiency model for electricity price subsidies and carbon-trading subsidies under two sources of uncertainty power demand for PV and the investment cost-reduction probability. This study aims to compare the two forms of subsidies from the perspective of promoting immediate investment and maximizing the subsidy policy efficiency for the government (minimizing the unit carbon-mitigation cost) and advance relevant policy proposals. An example of China is provided to test the effectiveness of the model and to illustrate the implications of the solutions. The results show that a carbon-trading subsidy is better than an electricity price subsidy and that it is essential to improve the demand for the power produced by the PV power-generation projects. Lower market risk and driving technology progress are both conducive to improving the subsidy efficiency. This study also provides a meaningful reference for governments worldwide to formulate subsidy programs to support PV power-generation projects.