The effect of ambient ozone pollution and acidic rain on the growth and chlorophyll content of green and white ash

Two- and three-year old green ash (Fraxinus americana L.) and white ash (Fraxinus pennsylvanica Marsh.) seedlings were exposed to combinations of ambient ozone and acidic ambient rainfall in New Brunswick, New Jersey. During the 3-year study the potted seedlings did not develop typical foliar ozone toxicity symptoms, despite the occurrence of as many as 78 h in exceedance of the National Ambient Air Quality Standard of 0.12 ppm. Although the pH of the rainfall was as low as 3.6 and averaged 4.1, no symptoms were observed resulting from the ambient precipitation. The rate of shoot growth in terms of height and diameter was generally not affected by either of the pollutants during the growing season. Although the chlorophyll content of white ash foliage was low following frequent rainfall in the early summer of 1984, there was no statistically significant evidence that acid raid or ambient ozone decreased chlorophyll in ash seedlings during the 3-year study.     

Matrix-immobilized organoclay for the sorption of polycyclic aromatic hydrocarbons and pentachlorophenol from groundwater

Sorbent materials consisting of organoclay immobilized onto the surface of a solid support were evaluated for use in pentachlorophenol (PCP) and polycyclic aromatic hydrocarbon (PAH) remediation of groundwater at a creosote-contaminated Superfund site. Cetylpyridinium-exchanged low pH montmorillonite clay (CP-LPHM) was bonded to either sand (CP-LPHM/sand) or granular activated carbon (GAC) (CP-LPHM/GAC) using the free acid form of carboxymethylcellulose as an adhesive. Effluent from an oil-water separator was eluted through equal bed volumes of composite (4 g 3:2 CP-LPHM/GAC or 13 g CP-LPHM/sand), affinity-extracted, and quantitatively analyzed by GC/MS. PCP, naphthalene, fluorene, phenanthrene, pyrene, and total PAHs were initially reduced by both CP-LPHM/GAC (> or =99%, 61%, 99%, > or =99%, 97%, and 94%, respectively) and CP-LPHM/sand (90%, 70%, 94%, 95%, 93%, and 86%, respectively). Complete breakthrough of naphthalene occurred after approximately 15 h of elution through 3:2 CP-LPHM/GAC and 22 h through CP-LPHM/sand. PCP showed complete breakthrough following 18 h of elution through 3:2 CP-LPHM/GAC and 26 h through CP-LPHM/sand. However, 50% breakthrough was not attained for higher molecular weight PAHs, as fluoranthene, pyrene, benzo[a]anthracene, and chrysene continued to be greatly reduced with both 3:2 CP-LPHM/GAC (98%, 95%, 94%, and 95%, respectively) and CP-LPHM/sand (75%, 73%, 76%, and 78%, respectively) after 48 h of continuous elution. Results confirm prior studies, indicating that these organoclay-containing composites have a high capacity for contaminants found in wood preserving waste. Further, results suggest that the inclusion of CP-LPHM may be useful as part of an effective strategy for groundwater remediation of high concentrations of PCP and PAHs, in particular high molecular weight and carcinogenic PAHs.     

FIA/MS analysis of temporally ozonated benzo[a]pyrene and pyrene and their reaction products: inhibition of gap junction-mediated intercellular communication

In this study, the polycyclic aromatic hydrocarbons, benzo[a]pyrene (BaP) and pyrene, were subjected to temporal ozonation. The products from ozonation of 5 mg l(-1) BaP and 5 mg l(-1) pyrene, for varying time intervals (0, 1, 2, 3, 4, 5, 6, 8, 10, 20, and 30 min) were tested for their effects on gap junction-mediated intercellular communication (GJIC) in Clone 9 rat liver cells. Additionally, the ozonation products were also analyzed by flow injection analysis/mass spectrometry (FIA/MS) and the results were compared with the toxicity observed in the GJIC assay. Treatment of the Clone 9 cells with 5 mg l(-1) of ozonated BaP products resulted in a decrease in GJIC that was inversely proportional to the length of ozonation. The products from 1 min of ozonation resulted in a 92% decrease in the rate of GJIC, but with >5 min ozonation, the products did not suppress GJIC. In contrast, pyrene (0.5 mg l(-1)) required >10 min of ozonation to alleviate its effects on GJIC. FIA/MS, using atmospheric pressure chemical ionization (APCI), demonstrated products with higher molecular weights (MW) than their corresponding parent compounds, BaP (MW 252) and pyrene (MW 202). Ozonation of pyrene formed significantly fewer products than BaP. More importantly, pyrene ozonation products were constant from 1 to 10 min, while BaP ozonation products seemed to vary between time intervals. With the longer ozonation times (20 and 30 min), BaP and pyrene formed similar products (m/z peaks 157, 111, and 96). The suppression of GJIC by ozonated products seemed to correlate with oxidation of the aromatic ring framework. Further oxidation (longer ozonation times) to lower MW products correlated with restoration of normal GJIC.     

The effects of light and thallus scour from<Emphasis Type="Italic"> Ecklonia radiata</Emphasis> canopy on an associated foliose algal assemblage: the importance of photoacclimation

Kelp canopies have long been recognised for their influence on the structure of algal assemblages on sublittoral reefs. In Marmion Lagoon, Western Australia, we investigated how a canopy of the small kelp Ecklonia radiata affected the associated foliose algal assemblage and what potential mechanisms were responsible for the effects we observed. Light levels and physical abrasion (thallus scour) by an E. radiata canopy were manipulated in an orthogonal fixed-factor experiment that revealed that changes in light, but not thallus scour, had a significant effect on the composition of the algal assemblage. Reduced light levels were associated with a decrease in the Shannon-Wiener diversity index and an increased dominance of the foliose algae Pterocladia lucida and Rhodymenia sonderi. Photobiological investigations of three foliose species, P. lucida, R. sonderi and Chauviniella coriifolia indicated that they were able to photoacclimate to low light levels by increasing thallus absorption by up to 11%. Photoacclimation was also evident by an increase in the maximum rate of electron transport under low-light conditions. We conclude that the E. radiata canopy in Marmion Lagoon structures the foliose algal assemblage through the modification of the light environment and that this effect may be mediated by differences in the ability of different species of foliose algae to photoacclimate.Communicated by M.S. Johnson, Crawley     

Conservation Genetics of the Common Snapping Turtle (Chelydra serpentina)

Previous studies of relationships among the subspecies of snapping turtles ( Chelydra serpentina } based on morphological and osteological characters have been inconclusive. We investigated relationships among the four currently recognized subspecies using restriction endonuclease fragment patterns of mtDNA and protein electrophoresis. Sixteen six-based recognizing restriction endonucleases yielded 90 variable fragments that define 11 different haplotypes. Individuals of the two North American subspecies, C. s. osceola and C. s. serpentina , are closely related, differing by a maximum of 0.5% sequence divergence. The Central American subspecies, C. s. rossignonii and C. s. acutirostris , are more distinct, both from each other (a minimum of 1.7% sequence divergence) and from the North American samples (an average of 4.45% sequence divergence). The degree of allozymic variation among the four subspecies was found to be limited and could not be used to diagnose the four recognized subspecies. The mtDNA data presented here support the species-level distinctness of C. s. rossignonii and C. s. acutirostris from each other and from a C. s serpentina-C. s. osceola complex. The recognition of three distinctive groups of Chelydra rather than one widespread polytypic species has important conservation implications because it focuses attention on the poorly known middle and South American species.     

Hot-blooded singers: endothermy facilitates crepuscular signaling in African platypleurine cicadas (Hemiptera: Cicadidae:<Emphasis Type="Italic"> Platypleura</Emphasis> spp.)

The cicada genus Platypleura has a wide distribution across Africa and southern Asia. We describe endothermic thermoregulation in four South African species that show crepuscular signaling behavior. This is the first evidence of thermoregulation in platypleurine cicadas. Field measurements of body temperature ( T _b) show that these animals regulate T _b through endogenous heat production. Maximum T _b measured was 22.1°C above ambient temperature during calling activity at dusk. The mean T _b during dusk activity did not differ from the mean T _b during diurnal activity. A unique behavior for cicadas, a temperature-dependent telescoping pulsation of the abdomen, was observed in the laboratory during endogenous warm-up. This behavior is part of a unique method of heat generation in endothermic cicadas. Males generally call from trunks and branches within the canopy and appear to use endothermy even when the sun is available to elevate T _b. Endothermy may provide the cicadas with the advantage of decreasing predation and acoustic competition by permitting calling from perches that most complement their cryptic coloration patterns and that ectotherms cannot use due to thermal constraints. In addition, endothermy may permit calling activity during crepuscular hours when atmospheric conditions are optimal for acoustic communication and predation risks are minimal.     

Prenatal diagnosis of ring chromosome 6

An amniocentesis was performed on a gravida 1, para 0 23-year-old female because of high maternal serum alpha-fetoprotein and nuchal thickening/cystic mass apparent on the fetal ultrasound. Detailed ultrasound examination revealed multiple anomalies including brain abnormalities. The fetus was found to have a mosaic female karyotype: 45,XX, - 6/46,XX,r(6) (p25q27) (62 per cent:38 per cent). This is the first report of a prenatally diagnosed case of ring chromosome 6.     

Town-scale microbial sewer community and H2S emissions response to common chemical and biological dosing treatments

Controlling hydrogen sulfide (H₂S) odors and emissions using a single, effective treatment across a town-scale sewer network is a challenge faced by many water utilities. Implementation of a sewer diversion provided the opportunity to compare the effectiveness of magnesium hydroxide (Mg(OH)₂) and two biological dosing compounds (Bioproducts A and B), with different modes of action (MOA), in a field-test across a large sewer network. Mg(OH)₂ increases sewer pH allowing suppression of H₂S release into the sewer environment while Bioproduct A acts to disrupt microbial communication through quorum sensing (QS), reducing biofilm integrity. Bioproduct B reduces H₂S odors by scouring the sewer of fats, oils and grease (FOGs), which provide adhesion points for the microbial biofilm. Results revealed that only Mg(OH)₂ altered the microbial community structure and reduced H₂S emissions in a live sewer system, whilst Bioproducts A and B did not reduce H₂S emissions or have an observable effect on the composition of the microbial community at the dosed site. Study results recommend in situ testing of dosing treatments before implementation across an operational system.     

Examination of honeys and flowers as soil element indicators

Detection of soil element deficiencies is time consuming, requiring a major commitment for field work and analysis. Bees concentrate some elements in their honey which could allow soil element concentrations to be predicted without having to take large numbers of soil samples. We measured 14 element concentrations in soil, sunflower, acacia flower and honey samples from two different regions of Hungary. Across sites, the elements with significant correlation coefficients between honey and soil concentrations, in descending order of probability, were Cu > Ba >Sr = Ni > Zn > Mn = Pb >As. Bioconcentration from soil to honey was similar for areas with acacia and sunflower flowers. In the macroelements, it was the greatest for K, S and P and least for Mg and Na, and in the microelements, greatest for B, then Zn, then Cu, then As, Mo and Sr and least for Fe, Ba, Mn and Pb. It is concluded that in acacia and sunflower-growing regions, honey can give an accurate estimate of soil element concentrations for Cu and Ba and provides relevant information for Sr, Ni, Zn, Mn, Pb and As.     

An evaluation of four key methods for monitoring household waste prevention campaigns in the UK

Household waste prevention in England has been recognised in national strategy as a key component for future sustainable practice. To support the policy agenda, the Department of Environment, Food and Rural Affairs (Defra) in England has funded an extensive programme of fundamental research in the area. The specific research aim reported on here, in this Defra funded project, was to trial and assess methods for monitoring and evaluating approaches detailed in the National Resource and Waste Forum (NRWF)’s Household Waste Prevention Toolkit. The methods that formed the basis for the four research Objectives for the project were: using pilot and control areas (core Objective), tracking waste arisings, measuring specific activities and declared awareness and behaviour surveys. A primary objective of this research was to quantify the direct waste tonnage impacts of implementing a targeted household waste campaign in Dorset County, UK. A key performance indicator chosen for this assessment was the weight of waste collected at the kerbside from households. In an area where a waste prevention campaign is well planned and implemented then reductions in household waste arisings in pilot areas can be in the region of 2% per annum. This method for monitoring can be used, in the hands of an expert project team, to communicate to the public the direct benefits of waste prevention. It was found that there are a wide range of factors that need to be taken into account in the UK, and that these had hitherto been given little prominence, such as careful matching of pilot and control areas – this proved problematical in this research. However, a range of techniques used to support the methods, e.g. doorstepping surveys and focus groups could not show clear attributable waste prevention impacts but their findings could be used to direct new future messages to the public. The most successful and measurable campaign activities that were revealed by evaluation were: mail preference registrations, Home composting and doorstepping. An expert evaluation of all major methods found that no clear preference was revealed as to which were the most useful. None of the methods were judged very poor neither very good, all had major issues about their use. Tracking waste arisings and focus groups were assessed to be the best techniques in terms of input effort to output value. It is likely that waste prevention teams for household waste will need very careful training in the cost-effective use of the NRWF Toolkit before they are competent to apply it to a given place; the issues are more complex than were first thought.