Rehabilitation of the chernoistochinskii drinking water system,Nizhnii Tagil,Russia

The U.S. Environmental Protection Agency (EPA) performed a reservoir diagnosis and developed low-cost recommendations to improve drinking water quality for the city of Nizhnii Tagil, Russia. Despite widespread regional pollution, water quality within the drinking water supply source can be summarized as generally good. Sampling and analysis efforts did not reveal appreciable amounts of hazardous chemicals or metals. The major water quality problem stems from an abundance of blue-green algae during the summer months, causing drinking water taste and odor problems and filter clogging at the water treatment plant. City water treatment officials also frequently experience difficulties with maintaining an effective disinfection residual in the distribution system because it spans more than 30 kilometers in length. Regrowth of microorganisms in the distribution system often causes coliform bacteria counts to exceed standards. The implementation of a watershed protection and management program, and the installation of a new disinfection system, to purify drinking water and to reduce bacterial growth in the distribution system should improve drinking water quality for the city residents.     

Effect of atmospheric N deposition on surface water chemistry and the implications for fisheries

In this paper the relative importance of NO3- and SO4(2-) as anions in oligotrophic surface waters and evidence that NO3 concentrations have been increasing in recent decades in reviewed. The relationship between NO3- and the concentrations of cations (H+ and Al3+) known to be harmful to aquatic biota is also discussed. It is generally concluded that although direct proof of an association is lacking, circumstantial evidence suggests that atmospheric input of nitrogen to soils on certain 'sensitive' geologies may be having consequences for surface waters and the biota living in them, especially at certain times of the year, e.g. snowmelt.     

Optimal design for sustainable development of a material recovery facility in a fast-growing urban setting

Installing material recovery facilities (MRFs) in a solid waste management system could be a feasible alternative to achieve sustainable development goals in urban areas if current household and curbside recycling cannot prove successful in the long run. This paper addresses the optimal site selection and capacity planning for a MRF in conjunction with an optimal shipping strategy of solid waste streams in a multi-district urban region. Screening of material recovery and disposal capacity alternatives can be achieved in terms of economic feasibility, technology limitation, recycling potential, and site availability. The optimization objectives include economic impacts characterized by recycling income and cost components for waste management, while the constraint set consists of mass balance, capacity limitation, recycling limitation, scale economy, conditionality, and relevant screening constraints. A case study for the City of San Antonio, Texas (USA) presents a vivid example where scenario planning demonstrates the robustness and flexibility of this modeling analysis. It proves especially useful when determining MRF ownership structure. Each scenario experiences two case settings: (1) two MRF sites are proposed for selection and (2) a single MRF site is sought. Cost analysis confirms processing fees are not the driving force in the City's operation, but rather shipping cost. Sensitivity analysis solidifies the notion that significant public participation plays the most important role in minimizing solid waste management expenses.     

The EXPURT model for calculating external gamma doses from deposited material in inhabited areas

EXPURT, NRPB's model for calculating external gamma doses in inhabited areas, was originally developed in the mid-1980s. Deposition on surfaces in the area, the subsequent transfer of material between different surfaces or its removal from the system, and dose rates in various locations from material on the different surfaces are modelled. The model has been updated to take account of more recent experimental data on the transfer rates between surfaces and to make it more flexible for use in assessing dose rates following an accidental release. EXPURT is a compartmental model and models the transfer of material between the surfaces using a set of first order differential equations. It enables the impact of the decontamination of surfaces on doses and dose rates to be explored. The paper describes the EXPURT model and presents some preliminary results obtained using it.     

Does employee safety influence customer satisfaction? Evidence from the electric utility industry

ProblemResearch on workplace safety has not examined implications for business performance outcomes such as customer satisfaction.MethodIn a U.S. electric utility company, we surveyed 821 employees in 20 work groups, and also had access to archival safety data and the results of a customer satisfaction survey (n = 341).ResultsIn geographically-based work units where there were more employee injuries (based on archival records), customers were less satisfied with the service they received. Safety climate, mediated by safety citizenship behaviors (SCBs), added to the predictive power of the group-level model, but these two constructs exerted their influence independently from actual injuries. In combination, two safety-related predictor paths (injuries and climate/SCB) explained 53% of the variance in customer satisfaction.DiscussionResults offer preliminary evidence that workplace safety influences customer satisfaction, suggesting that there are likely spillover effects between the safety environment and the service environment. Additional research will be needed to assess the specific mechanisms that convert employee injuries into palpable results for customers.Impact on IndustryBetter safety climate and reductions in employee injuries have the potential to offer payoffs in terms of what customers experience.     

Evaluation of give kids a boost: A school-based program to increase booster seat use among urban children in economically disadvantaged areas

Objective: This study evaluated the effectiveness of a series of 1-year multifaceted school-based programs aimed at increasing booster seat use among urban children 4–7 years of age in economically disadvantaged areas.

Methods: During 4 consecutive school years, 2011–2015, the Give Kids a Boost (GKB) program was implemented in a total of 8 schools with similar demographics in Dallas County. Observational surveys were conducted at project schools before project implementation (P₀), 1–4 weeks after the completion of project implementation (P₁), and 4–5 months later (P₂). Changes in booster seat use for the 3 time periods were compared for the 8 project and 14 comparison schools that received no intervention using a nonrandomized trial process.

The intervention included (1) train-the-trainer sessions with teachers and parents; (2) presentations about booster seat safety; (3) tailored communication to parents; (4) distribution of fact sheets/resources; (5) walk-around education; and (6) booster seat inspections.

The association between the GKB intervention and proper booster seat use was determined initially using univariate analysis. The association was also estimated using a generalized linear mixed model predicting a binomial outcome (booster seat use) for those aged 4 to 7 years, adjusted for child-level variables (age, sex, race/ethnicity) and car-level variables (vehicle type). The model incorporated the effects of clustering by site and by collection date to account for the possibility of repeated sampling.

Results: In the 8 project schools, booster seat use for children 4–7 years of age increased an average of 20.9 percentage points between P₀ and P₁ (P₀ = 4.8%, P₁ = 25.7%; odds ratio [OR] = 6.9; 95% confidence interval [CI], 5.5, 8.7; P < .001) and remained at that level in the P₂ time period (P₂ = 25.7%; P < .001, for P₀ vs. P₂) in the univariate analysis. The 14 comparison schools had minimal change in booster seat use. The multivariable model showed that children at the project schools were significantly more likely to be properly restrained in a booster seat after the intervention (OR = 2.7; 95% CI, 2.2, 3.3) compared to the P₀ time period and compared to the comparison schools.

Conclusion: Despite study limitations, the GKB program was positively associated with an increase in proper booster seat use for children 4–7 years of age in school settings among diverse populations in economically disadvantaged areas. These increases persisted into the following school year in a majority of the project schools. The GKB model may be a replicable strategy to increase booster seat use among school-age children in similar urban settings.     

Effects of alcohol at 0.05% blood alcohol concentration (BAC) on low speed urban driving

ABSTRACT

Objective: Alcohol-impaired driving presents a continued risk for traffic safety and results in a significant proportion of fatalities on the roadway. We examined how alcohol at a 0.05% blood alcohol concentration (BAC) compares to 0.10% BAC (above the current U.S. legal limit) in terms of impact on driving performance.

Methods: Utilizing a within-subjects design, we recruited 108 healthy experienced drivers who were moderate to heavy drinkers. In a double-blind, placebo-controlled crossover design, we administered placebo and alcohol at the 0.05% and 0.10% BAC levels in a standardized simulated driving protocol. Drives occurred on the descending limb of the blood alcohol curve. This analysis focuses on the urban portion of the drive

Results: The study observed clear differences in performance for lateral and longitudinal driving performance and glance behavior. Variability in lane keeping and average speed increased with BAC level, with degraded performance observed at 0.05% BAC. The frequency of lane departures and percentage of time focused on the forward roadway at 0.05% BAC did not differ from placebo but differed from the 0.10% BAC level.

Conclusions: Overall, our results show that there is degraded performance in the urban driving environment and that much of that begins at or below the 0.05% BAC level.