Economic Benefits of Improvements in Visibility: Acid Rain Provisions of the 1990 Clean Air Act Amendments

The Acid Rain Provisions (Title IV) of the Clean Air Act Amendments of 1990 call for about a 10 million ton reduction in annual SO₂ emissions in the United States. Although the provisions apply nationwide, most of the reduction will occur in the eastern half of the country, where use of high-sulfur coal for electricity generation is most common. One potentially large benefit of Title IV is the expected improvement in visibility conditions in the eastern United States due to the reductions in secondary sul-fate aerosols. This paper combines available economic estimates of willingness to pay for improvements in visibility with current estimates of the difference between expected visibility conditions in the eastern United States with and without Title I V, to estimate the expected visibility benefits of Title IV. The results suggest an annual value of $2.3 billion (in 1994 dollars) in the year 2010, as a result of visibility improvements due to Title IV in residential areas of the eastern United States. The results also suggest a possible additional annual value for eastern U.S. residents of as much as $1-2 billion for visibility improvements at national parks in the Southeast.     

Use of Benzo[a]pyrene Relative Abundance Ratios to Assess Exposure to Polycyclic Aromatic Hydrocarbons in the Ambient Atmosphere in the Vicinity of a Söderberg Aluminum Smelter

ABSTRACT

The purpose of this study was to investigate the use of benzo[a]pyrene (B[a]P) relative abundance ratios (RARs) to assess exposure to polycyclic aromatic hydrocarbons (PAHs) in the urban atmospheric air in the vicinity of a horizontal stud Söderberg aluminum reduction facility. The B[a]P RARs refer to the concentration of individual PAHs measured in a given sample divided by the concentration of B[a]P found in the same sample. This study compared the B[a]P RARs calculated for the facility stack and three sites near the Söderberg aluminum smelter for three different sampling periods. Interperiod differences were significant for many of the PAHs, and the differences between the stations proved insignificant at p < 0.05. The differences between each individual station and the facility stack were significant for all PAHs. B[a]P RARs increased in value at the stations compared with the stack, indicating that B[a]P may be degraded or removed from the atmosphere at a rate greater than that of the majority of the measured PAHs. It is concluded that B[a]P and B[a]P RARs may be poor markers of exposure to PAHs in the vicinity of this Söderberg aluminum refinery for the entire mixture of PAHs present in the ambient atmosphere.     

Genotoxicity of chromium in vitro on yeast: Interaction with DNA†

The genotoxicity of chromium chloride was investigated in cells of D₇ strain of Saccharomyces cerevisiae harvested either from logarithmic or stationary growth phase.

A weak induction of mifotic gene conversion and point reverse mutation was obtained when the incubations were performed using phosphate buffer. No genetic effect was observed when the incubations were performed using Tris‐HCl buffer.

The experiments with ⁵¹Cr radiotracer demonstrated that Cr³⁺ ion enters the yeast cells and binds to DNA even if the incubation mixture was performed with Tris HCl buffer. This behaviour could be due to the highest concentration of CrCl₃ that cause some damages to cytoplasmatic membrane.     

Accumulation of arsenic, lead, copper, and zinc, and synthesis of phytochelatins by indigenous plants of a mining impacted area

Several native plants, able to grow in an unconfined mining impacted area that is now in close vicinity with urban areas, were evaluated for their ability to accumulate heavy metals. The main soil contaminants were As, Pb, Cu, and Zn. Sampling of the rhizospheric metal polluted soil showed that Euphorbia prostrata Aiton, Parthenium incanum Kunth, and Zinnia acerosa (DC.) A. Gray were able to grow in the presence of high amounts of mixtures of these elements. The plants accumulated the metals in the above ground parts and increased the synthesis of thiol molecules. E. prostrata showed the highest capacity for accumulation of the mixture of elements (588 μg g DW^?1). Analysis of the thiol-molecules profile showed that these plants synthesized high amounts of long-chain phytochelatins, accompanied by low amounts of monothiol molecules, which may be related to their higher resistance to As and heavy metals. The three plants showed translocation factors from roots to leaves >1 for As, Pb, Cu, and Zn. Thus, by periodically removing aerial parts, these plants could be useful for the phytoremediation of semi-arid and arid mining impacted areas, in which metal hyper-accumulator plants are not able to grow.     

Determination of sixteen pesticides in peppers using high-performance liquid chromatography/mass spectrometry

A method for the detection and quantification of 16 pesticides: flufenoxuron, fenoxycarb, dimethomorph, acetamiprid, imidacloprid, lufenuron, thiacloprid, thiabendazole, thiophanate-methyl, spinosad, fenbutatin oxide, methoxyfenozide, oxamyl, clothianidin, thiamethoxam and carbendazim has been developed based on high-performance liquid chromatography-mass spectrometry. Pesticide residues were extracted from the samples according to the QuEChERS method which stands for quick, essay, cheap, effective, rugged and safe. Homogenised analytical portions (10 g ± 0.1) of samples of peppers were spiked at two levels (10 and 100 μg kg?1) with a small volume of an appropriate standard mixture solution containing each pesticide. Analyses were performed using electrospray ionization (ESI) and a MSD trap system. Chromatography separation was achieved using a ZORBAX SB-C18 3.5 μm particle size analytical column, 2.1 × 50 mm from Agilent, with gradient elution at a flow-rate of 0.4 mL/min with mobile phases: waters-0.1 % HCOOH-5 mM HCOONH? and MeOH-5 mM HCOONH?. The method has been validated based on the SANCO European Guidelines. Under the optimized conditions the recoveries (n = 7) were in the range 70-110 % with satisfactory precision (CV ≤ 20 %). A linear dynamic range was obtained over a range of concentrations from 10 to 100 μg kg?1 for each of the analytes, with correlation coefficients >0.997.     

Temporal evolution of the main processes that control indoor pollution in an office microenvironment: a case study

The aim of this study is to examine the relative contribution of the outdoor concentration, the ventilation rate, the geometric characteristics of the indoor environment (i.e., extent of indoor surfaces and indoor volume), the deposition, and chemical reactions to the indoor air quality of the office microenvironment. For this case study, the NO, NO₂, and O₃ concentrations indoors and outdoors and TVOCs and CO₂ concentrations indoors were measured in an office microenvironment in Athens, Greece, that was ventilated both naturally and mechanically. The calculated ventilation and loss rates and the measured outdoor concentrations of NO, NO₂, and O₃ were set as input to Multi-chamber Indoor Air Quality Model in order to study the temporal variation of the indoor NO, NO₂, and O₃ concentrations. Results showed that when the ventilation rate and outdoor concentration are high, the relative contribution of the transport process contributes significantly, while the chemical process depends on the contemporary interplay between the indoor O₃, NO, and NO₂ concentrations and lighting levels. The significance of each process was further examined by performing sensitivity tests, and it was found that the most important parameters were the deposition velocities, the UV infiltration rates (which determines the indoor chemical reaction rates), the ventilation rates, and the filtration (when a mechanical ventilation system is used). The effect of the hydrocarbon chemistry was not significant.     

The LUCAS topsoil database and derived information on the regional variability of cropland topsoil properties in the European Union

Approximately 20,000 topsoil samples were collected in 25 European Union (EU) Member States (EU-27 except Bulgaria and Romania) with the aim to produce the first coherent pan-European physical and chemical topsoil database, which can serve as baseline information for an EU wide harmonized soil monitoring. The soil sampling was undertaken within the frame of the Land Use/Land Cover Area Frame Survey (LUCAS), a project to monitor changes in the management and character of the land surface of the EU. Soil samples have been analysed for basic soil properties, including particle size distribution, pH, organic carbon, carbonates, NPK, cation exchange capacity (CEC) and multispectral signatures. Preliminary studies show the outstanding potential of the dataset for enhancing the knowledge base on soils in the EU. The current paper provides an introduction to the LUCAS Topsoil 2009 project and provides an example of data applicability for cropland assessment by highlighting initial results for regional and national comparisons.     

Integrated Assessment Modeling of Atmospheric Pollutants in the Southern Appalachian Mountains. Part I: Hourly and Seasonal Ozone

Abstract

Recently, a comprehensive air quality modeling system was developed as part of the Southern Appalachians Mountains Initiative (SAMI) with the ability to simulate meteorology, emissions, ozone, size- and composition-resolved particulate matter, and pollutant deposition fluxes. As part of SAMI, the RAMS/EMS-95/URM-1ATM modeling system was used to evaluate potential emission control strategies to reduce atmospheric pollutant levels at Class I areas located in the Southern Appalachians Mountains. This article discusses the details of the ozone model performance and the methodology that was used to scale discrete episodic pollutant levels to seasonal and annual averages. The daily mean normalized bias and error for 1-hr and 8-hr ozone were within U.S. Environment Protection Agency guidance criteria for urban-scale modeling. The model typically showed a systematic overestimation for low ozone levels and an underestimation for high levels. Because SAMI was primarily interested in simulating the growing season ozone levels in Class I areas, daily and seasonal cumulative ozone exposure, as characterized by the W126 index, were also evaluated. The daily ozone W126 performance was not as good as the hourly ozone performance; however, the seasonal ozone W126 scaled up from daily values was within 17% of the observations at two typical Class I areas of the SAMI region. The overall ozone performance of the model was deemed acceptable for the purposes of SAMI’s assessment.     

Activated sludge systems removal efficiency of veterinary pharmaceuticals from slaughterhouse wastewater

The knowledge on the efficiency of wastewater treatment plants (WWTPs) from animal food production industry for the removal of both hormones and antibiotics of veterinary application is still very limited. These compounds have already been reported in different environmental compartments at levels that could have potential impacts on the ecosystems. This work aimed to evaluate the role of activated sludge in the removal of commonly used veterinary drugs, enrofloxacin (ENR), tetracycline (TET), and ceftiofur, from wastewater during a conventional treatment process. For that, a series of laboratory-controlled experiments using activated sludge were carried out in batch reactors. Sludge reactors with 100 μg/L initial drug charge presented removal rates of 68 % for ENR and 77 % for TET from the aqueous phase. Results indicated that sorption to sludge and to the wastewater organic matter was responsible for a significant percentage of drugs removal. Nevertheless, these removal rates still result in considerable concentrations in the aqueous phase that will pass through the WWTP to the receiving environment. Measuring only the dissolved fraction of pharmaceuticals in the WWTP effluents may underestimate the loading and risks to the aquatic environment.     

Factors determining the fluctuation of fluoride concentrations in PM10 aerosols in the urbanized coastal area of the Baltic Sea (Gdynia, Poland)

Fluoride concentrations were determined in PM10 samples collected in the urbanized coastal area of the Baltic Sea (Gdynia) in the period between 1 August 2008 and 8 January 2010. F^? concentrations remained within the range of 0.4–36.6 ng?·?m^?3. The economic transformations which have taken place in Poland increasing ecological awareness have had an excellent effect on the levels of fluoride pollution in the air of the studied region. In our measurements, fluoride concentrations increased in wintertime, when air temperature dropped, at low wind speeds (<1 m?·?s^?1) and with low dispersion of pollutants originating from local sources (traffic, industry, domestic heating). At times when wind speed grew to >10 m?·?s^?1, fluorides were related to marine aerosols or else brought from distant sources. Apart from wind speed and air temperature, other significant meteorological parameters which determined the variability of F^? turned out to be air humidity and precipitation volume. Aerosols were washed out effectively, even with small precipitation (h?=?4 mm), and if a dry period lasted for several days, their concentrations grew rapidly to over 30.0 ng?·?m^?3.