锅炉环境影响评价系统软件研究

用Ｃ语言作为开发语言，研制开发了锅炉环境影响评价系统软件，软件充分利用Ｃ语言模块化，过程化的优点，源程序由１２个模块组成。经编译连接生成一个可执行程序，用户只需输入１５个必需的原始参数，软件即可自动查询，计算大量的中间参数，并立即给出污染源强及污染物在周围环境中分布的预测和评价结果。     

Suggested protocol for collecting, handling and preparing peat cores and peat samples for physical, chemical, mineralogical and isotopic analyses

For detailed reconstructions of atmospheric metal deposition using peat cores from bogs, a comprehensive protocol for working with peat cores is proposed. The first step is to locate and determine suitable sampling sites in accordance with the principal goal of the study, the period of time of interest and the precision required. Using the state of the art procedures and field equipment, peat cores are collected in such a way as to provide high quality records for paleoenvironmental study. Pertinent field observations gathered during the fieldwork are recorded in a field report. Cores are kept frozen at -18 degree C until they can be prepared in the laboratory. Frozen peat cores are precisely cut into 1 cm slices using a stainless steel band saw with stainless steel blades. The outside edges of each slice are removed using a titanium knife to avoid any possible contamination which might have occurred during the sampling and handling stage. Each slice is split, with one-half kept frozen for future studies (archived), and the other half further subdivided for physical, chemical, and mineralogical analyses. Physical parameters such as ash and water contents, the bulk density and the degree of decomposition of the peat are determined using established methods. A subsample is dried overnight at 105 degree C in a drying oven and milled in a centrifugal mill with titanium sieve. Prior to any expensive and time consuming chemical procedures and analyses, the resulting powdered samples, after manual homogenisation, are measured for more than twenty-two major and trace elements using non-destructive X-Ray fluorescence (XRF) methods. This approach provides lots of valuable geochemical data which documents the natural geochemical processes which occur in the peat profiles and their possible effect on the trace metal profiles. The development, evaluation and use of peat cores from bogs as archives of high-resolution records of atmospheric deposition of mineral dust and trace elements have led to the development of many analytical procedures which now permit the measurement of a wide range of elements in peat samples such as lead and lead isotope ratios, mercury, arsenic, antimony, silver, molybdenum, thorium, uranium, rare earth elements. Radiometric methods (the carbon bomb pulse of (14)C, (210)Pb and conventional (14)C dating) are combined to allow reliable age-depth models to be reconstructed for each peat profile.     

乌鲁木齐市餐饮业油烟污染的调查及防治初探

通过对乌鲁木齐市20家餐饮业油烟污染的调查分析，结果表明，乌鲁木齐市餐饮业油烟污染严重，并提出了防治措施。     

石河子市空气污染成因及防治对策

对石河子市空气环境质量状况进行了评价，对影响石河子市环境质量的主要因素进行了分析，得出石河子市空气污染属煤烟沙尘型，提出了相应的治理措施和建议。     

Degradation of Pesticides on Plant Surfaces and its Prediction - A Case Study on Tea Plant

The degradative kinetics of pesticides on plant surface are characterized by an initial rapid degradation which follows a first-order kinetics, then transferred to a more slower degradative rate. The degradative process mainly consists of photodegradation, evaporation, rainfall elution and growth dilution. The influencing parameters of these processes were investigated by using the tea plant as a case study. The predictive model of the initial concentration, photodegradation rate constant, evaporation rate constant, rainfall elution rate, growth dilution rate and the total degradation rate was discussed and verified in four locations situated in the range of 25°-30°N latitude, and acceptable results were obtained.     

Modeling photocatalytic destruction of the organic contaminants in continuous stir flow reactor

Thin-film technique is becoming an industry standard for the preparation of TiO₂-based photocatalyst for organic destruction. The catalyst provides several advantages over the conventional powder TiO₂ in the treatment of wastewater and groundwater. In this study, a continuous stir flow reactor model is developed capable of describing the photocatalytic process. The model incorporates the following fundamental mechanisms: adsorption, diffusion, liquid-film transfer, UV attenuation, and photocatalytic reaction. All of the simulation results indicate that there exists a highly nonlinear relation between each of these parameters and the destruction rate. Various incident light intensities also are incorporated to simulate the energy efficiency. The simulations illustrate that the photocatalytic model can be used to elucidate the effect of process variables. It is also possible to “custom-design” a catalyst for the treatment of a particular waste stream.     

Occurrence of dissolved PAHs in the Jinsha River (Panzhihua)--upper reaches of the Yangtze River,Southwest China

16 priority polycyclic aromatic hydrocarbons (PAHs) were determined in water samples from the Jinsha River (Panzhihua part), Southwest China. Total dissolved PAH concentrations varied from 21.89 microg l(-1) to 382.8 microg l(-1). It was found that the concentration of PAHs decreased along the flow direction due to the higher density distribution of coal chemical industry in the upstream of our study rivers. The pollution levels in our study area are significantly higher than previously reported values in other waters both in China and other countries. The predominance of benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene was clearly observed in all water samples. On average these two compounds accounted for 98.3% of the total dissolved PAH concentration in water. The results showed the positive correlations among total dissolved PAHs, benzo[k]fluoranthene and indeno[1,2,3-cd]pyrene, which suggested that these two predominant PAHs have similar source and environmental behaviors in our study area. When compared with the survey results of organic micropollutants two decades ago, it was found that hydrocarbon pollution both predominated and even increased with the development of coal chemical industry in this area during the past 20 years. The results therefore provide important information on the current contamination status of a key industrial city in China, and points to the need for urgent action to investigate the relationship between the PAH composition and concentration in water from the Jinsha River and the wastewater discharge from coal chemical industry, and to identify the source, transport pathway and fate of PAHs in the area. It should then be necessary to adopt appropriate and instant measures to control the pollution around this area.     

Evaluation of interference to conventional and real-time PCR for detection and quantification of fungi in dust

Advances in polymerase chain reaction (PCR) have permitted accurate, rapid and quantitative identification of microorganisms in pure cultures regardless of viability or culturability. In this study, a simple sample processing method was investigated for rapid identification and quantification of fungal spores from dust samples using both conventional and real-time PCR. The proposed method was evaluated for susceptibility to interference from environmental dust samples. Stachybotrys chartarum and Aspergillus fumigatus were used as test organisms. The sensitivity of detection in pure culture was 0.1 spore DNA equivalents per PCR reaction corresponding to 20 spores ml(-1) in the sample. However, 1 spore DNA equivalent per PCR reaction corresponding to 200 spores ml(-1) in the sample was the lowest amount of spores tested without interference in dust samples spiked with spores of either fungal species. The extent of inhibition was calculated using conventional and real-time PCR reactions containing fungal spores, specific primers, specific probes (for real-time PCR) and various amounts of dust. The results indicate that the extent of inhibition by dust on PCR varies with the type and amount of dust, and number of spores. No interference in the analysis of spiked samples was detected from 0.2 mg ml(-1) of four real-life dust samples at p-value >0.05 using 2 x 10(4) spores for conventional PCR and 2 x 10(5) spores for real-time PCR. However, samples containing >0.2 mg ml(-1) real-life dust compromised the PCR assay. These results suggest the potential usefulness of a simple sample processing method in conjunction with PCR for monitoring the fungal content of aerosols collected from indoor environments.     

A study of the elemental leachability and retention capability of compost

In this work a comparison is made between the different approaches that can be taken to evaluate the mobility of elements in compost. The practical consequences of the results obtained are also discussed in terms of methods for cleaning up compost and using compost in environmental remediation. The mobility of potentially toxic elements in compost is evaluated by leaching with four selected eluents, i.e. diluted sulfuric acid, oxalate, citrate and EDTA. In contrast to the chelating agents, diluted sulfuric acid was found to generally have a low leaching capability for removal of heavy metals from compost. This implies that the risk of heavy metal leaching caused by natural rainfall is likely to be low. The results obtained in the leaching experiment were compared with previous results obtained from sequential fractionation. This comparison confirmed that both methods gave similar results for predicting the lability of elements in compost. A non-linear regression analysis of the leaching curves was also conducted. The leaching curves for elements with high lability could be fitted with a two components model. The labile components identified by the kinetic model are approximately in accordance with the fractions obtained from the first step of the sequential extraction method. The kinetic speciation method is shown to be a relatively rapid and simple procedure for compost which gives more information about element lability than simple leaching experiments. The leaching reagents used in this work were not effective enough to be used for cleaning up compost with a high metal content. Compost was however shown to have a high affinity for heavy metals, with the order of affinity of metal for the compost being very similar to that seen for humic acid. Compost may therefore prove to be a good remediation material for metal contaminated waste.     

国内外饮用水水质标准的综合评价

在参考国内外饮用水水质标准的基础上,建立了饮用水水质综合评价体系,通过专家咨询法获得判断矩阵,利用层次分析法计算各水质指标的权重,结合国内外饮用水水质标准的指标进行层次总排序,根据总排序结果对国内外饮用水水质标准的特点进行了综合评价。