Assessment of the applicability of a “toolbox” designed for microbially assisted phytoremediation: the case study at Ingurtosu mining site (Italy)

The paper describes the fieldwork at the Italian test site of the abandoned mine of sphalerite and galena in Ingurtosu (Sardinia), with the aim to assess the applicability of a “toolbox” to establish the optimized techniques for remediation of soils contaminated by mining activities. A preliminary characterization—including (hydro)geochemistry, heavy metal concentration and their mobility in soil, bioprospecting for microbiology and botany—provided a data set for the development of a toolbox to deliver a microbially assisted phytoremediation process. Euphorbia pithyusa was selected as an endemic pioneer plant to be associated with a bacterial consortium, established with ten selected native strains, including metal-tolerant bacteria and producers of plant growth factors. The toolbox was firstly assessed in a greenhouse pot experiment. A positive effect of bacterial inoculum on E. pithyusa germination and total plant survival was observed. E. pithyusa showed to be a well-performing metallophyte species, and only inoculated soil retained a microbial activity with a high functional diversity, expanding metabolic affinity also towards root exudates. These results supported the decision to proceed with a field trial, investigating different treatments used singly or in combination: bioaugmentation with bacterial consortia, mycorrhizal fungi and a commercial mineral amendment. Microbial activity in soil, plant physiological parameters and heavy metal content in plants and in soil were monitored. Five months after the beginning, an early assessment of the toolbox under field conditions was carried out. Despite the cold season (October–March), results suggested the following: (1) the field setup as well as the experimental design proved to be effective; (2) plant survival was satisfactory; (3) soil quality was increased and bioaugmentation improved microbial activity, expanding the metabolic competences towards plant interaction (root exudates); and (4) multivariate analysis supported the data provided that the proposed toolbox can be established and the field trial can be carried forward.     

Study of the SRF-derived ashes melting behavior and the effects generated by the optimization of their composition on the furnaces energy efficiency in the incineration plants

As regards the incineration process of the urban solid waste, the composition correct management allows not only the valorization of precise civil and industrial groups of waste as alternative fuels but also a considerable increase of the furnace work temperature leading to a remarkable improvement of the related energy efficiency. In this sense, the study of the melting behavior of ashes deriving from several kinds of fuels that have to be processed to heat treatment is really important. This approach, indeed, ensures to know in depth the features defining the melting behavior of these analyzed samples, and as a consequence, gives us the necessary data in order to identify the best mixture of components to be incinerated as a function of the specific working temperatures of the power plant. Firstly, this study aims to find a way to establish the softening and melting temperatures of the ashes because they are those parameters that strongly influence the use of fuels. For this reason, in this work, the fusibility of waste-derived ashes with different composition has been investigated by means of the heating microscope. This instrument is fundamental to prove the strict dependence of the ashes fusion temperature on the heating rate that the samples experienced during the thermal cycle. In addition, in this work, another technological feature of the instrument has been used allowing to set an instantaneous heating directly on the sample in order to accurately reproduce the industrial conditions which characterize the incineration plants. The comparison between the final results shows that, in effect, the achievement of the best performances of the furnace is due to the a priori study of the melting behavior of the single available components.     

Quaternary geographical sibling speciation and population structuring in the Eastern Atlantic skates (suborder Rajoidea) Raja clavata and R. straeleni

The European Raja clavata and the South African R. straeleni are marine skates which exhibit highly conserved morphological and ecological traits. Owing to this, taxonomic and evolutionary relationships between the two taxa have not yet fully elucidated. Here, we have tested the hypothesis that restricted gene flow and genetic divergence between these taxa might be associated with climatic/oceanographic discontinuities by surveying genetic variation in ten geographical samples at control region (CR) and amplified fragment length polymorphism (AFLP) loci. The clustering of CR haplotypes in two reciprocally monophyletic clades consistent with taxon zoogeography and the significant AFLP F values between the European and South African populations indicated the two taxa as recently diverged peripatric sibling species. Within each species, significant spatial genetic heterogeneity among samples at both markers revealed population structuring. We argued that structured populations and isolated sibling species might represent two stages of geographical speciation.     

Comparison of PM10 concentrations and metal content in three different sites of the Venice Lagoon: An analysis of possible aerosol sources

The Venice Lagoon is exposed to atmospheric pollutants from industrial activities, thermoelectric power plants, petrochemical plants, incinerator, domestic heating, ship traffic, glass factories and vehicular emissions on the mainland. In 2005, construction began on the mobile dams (MOSE), one dam for each channel connecting the lagoon to the Adriatic Sea as a barrier against high tide. These construction works could represent an additional source of pollutants. PM₁₀ samples were taken on random days between 2007 and 2010 at three different sites: Punta Sabbioni, Chioggia and Malamocco, located near the respective dam construction worksites. Chemical analyses of V, Cr, Fe, Co, Ni, Cu, Zn, As, Mo, Cd, Sb, Tl and Pb in PM₁₀ samples were performed by Inductively coupled plasma-quadrupole mass spectrometry (ICP-QMS) and results were used to identify the main aerosol sources. The correlation of measured data with meteorology, and source apportionment, failed to highlight a contribution specifically associated to the emissions of the MOSE construction works. The comparison of the measurements at the three sites showed a substantial homogeneity of metal concentrations in the area. Source apportionment with principal component analysis (PCA) and positive matrix factorization (PMF) showed that a four principal factors model could describe the sources of metals in PM₁₀. Three of them were assigned to specific sources in the area and one was characterised as a source of mixed origin (anthropogenic and crustal). A specific anthropogenic source of PM₁₀ rich in Ni and Cr, active at the Chioggia site, was also identified.     

Alkali activation processes for incinerator residues management

Incinerator bottom ash (BA) is produced in large amount worldwide and in Italy, where 5.1 millions tons of municipal solid residues have been incinerated in 2010, corresponding to 1.2–1.5 millions tons of produced bottom ash. This residue has been used in the present study for producing dense geopolymers containing high percentage (50–70 wt%) of ash. The amount of potentially reactive aluminosilicate fraction in the ash has been determined by means of test in NaOH. The final properties of geopolymers prepared with or without taking into account this reactive fraction have been compared. The results showed that due to the presence of both amorphous and crystalline fractions with a different degree of reactivity, the incinerator BA geopolymers exhibit significant differences in terms of Si/Al ratio and microstructure when reactive fraction is considered.     

Coltan from Central Africa,international trade and implications for any certification

The exploitation of coltan in Central Africa can be considered a case of conflict minerals due to its nature. Many international organizations and bodies, national governments and private sector organizations seek to address this conflict, in particular via transparency, certification and accountability along the material supply chain. This paper analyses the international trade dimension of coltan and gives evidence on the dimension of illicit trade of coltan. The authors start from the hypothesis that illicit trade of coltan sooner or later will enter the market and will be reflected in the statistics. The paper is structured in the following manner: first, a short section gives a profile of coltan production and markets; second, an overview of the mining situation in the Democratic Republic of Congo (DRC) and related actors. The third section addresses mechanisms, actors and measurement issues involved in the international trade of coltan. The final part draws lessons for certification and conflict analysis and offers some guidance for future research.     

Mytilus galloprovincialis as bioindicator in embryotoxicity testing to evaluate sediment quality in the lagoon of Venice (Italy)

The possibility of using Mytilus galloprovincialis from natural populations of the lagoon of Venice in toxicity bioassays based on embryo development, according to international standard methods, was investigated. In order to valuate this method for the lagoon, iterative steps including evaluation of reproducibility, sensitivity and discriminatory capacity towards some pure substances and environmental samples were performed. Evaluation of sensitivity towards a reference toxicant (copper) evidenced good replicability and repeatability. Results showed that natural population is better than hatchery population for performing bioassays. Evaluation of applicability to elutriates revealed that the method is able to discriminate among sediments of the lagoon of Venice at different typologies and levels of contamination, showing an important effect for almost all study sites.     

The cost of success: reproductive effort in male southern elephant seals (<Emphasis Type="Italic">Mirounga leonina</Emphasis>)

Reproductive effort is a key parameter of life history because it measures the resources allocated to reproduction at the expense of growth and maintenance. Male reproductive effort always had a minor role with respect to female effort both in the development of theories and in field research. Elephant seals are an ideal subject for reproductive effort studies because they fast during the breeding season, splitting the phase of energy acquisition from the phase of energy use for breeding. In this paper, we present results on male reproductive effort (weight loss estimated by photogrammetry) in southern elephant seals (Mirounga leonina), the most dimorphic and polygynous of all mammal species. We show that total reproductive effort increases with age, with no sign of late decrease or senescence. Male reproductive effort in this species depends mostly on behavioral factors, i.e., the success in competition with other males, and the intensity of interaction with females. A large effort results in large gains in both mating success and fertilizations. The large reproductive success that a few males are able to achieve come at a big cost in terms of energy expenditure, but this cost does not seem to affect the likelihood of survival to the following breeding season.     

Risk management of terrorist attacks in the transport of hazardous materials using dynamic geoevents

This paper focuses attention on emergency management associated with a terrorist attack in the transport of hazardous materials in urban areas. The case study is in an urban area, a potential target for terrorist attacks due to its high vulnerability. Since it is not possible to predict where and when an attack will occur, the risk associated with terrorism is complex. It is only possible to identify the critical points for potential actions where counter measure must be applied. In the case of incidents which evolve relatively slowly, mitigation actions can be applied. The use of dynamic geoevents permits the immediate location of the event on a georeferenced map and the possibility of having a dynamic evolution of the scenario and of the number of people involved. The dynamic scenario has been created using the output of a consequence simulation code and a GIS software. Some assumptions were necessary but, since the aim of the paper is to define the procedure for the construction of the dynamic geoevent, these can be considered acceptable. The method will be further implemented in future.