Industrial point source CO<Subscript>2</Subscript> emission strength estimation with aircraft measurements and dispersion modelling

CO₂ remains the greenhouse gas that contributes most to anthropogenic global warming, and the evaluation of its emissions is of major interest to both research and regulatory purposes. Emission inventories generally provide quite reliable estimates of CO₂ emissions. However, because of intrinsic uncertainties associated with these estimates, it is of great importance to validate emission inventories against independent estimates. This paper describes an integrated approach combining aircraft measurements and a puff dispersion modelling framework by considering a CO₂ industrial point source, located in Biganos, France. CO₂ density measurements were obtained by applying the mass balance method, while CO₂ emission estimates were derived by implementing the CALMET/CALPUFF model chain. For the latter, three meteorological initializations were used: (i) WRF-modelled outputs initialized by ECMWF reanalyses; (ii) WRF-modelled outputs initialized by CFSR reanalyses and (iii) local in situ observations. Governmental inventorial data were used as reference for all applications. The strengths and weaknesses of the different approaches and how they affect emission estimation uncertainty were investigated. The mass balance based on aircraft measurements was quite succesful in capturing the point source emission strength (at worst with a 16% bias), while the accuracy of the dispersion modelling, markedly when using ECMWF initialization through the WRF model, was only slightly lower (estimation with an 18% bias). The analysis will help in highlighting some methodological best practices that can be used as guidelines for future experiments.     

Pervaporation of ethanol produced from banana waste

Banana waste has the potential to produce ethanol with a low-cost and sustainable production method. The present work seeks to evaluate the separation of ethanol produced from banana waste (rejected fruit) using pervaporation with different operating conditions. Tests were carried out with model solutions and broth with commercial hollow hydrophobic polydimethylsiloxane membranes. It was observed that pervaporation performance for ethanol/water binary mixtures was strongly dependent on the feed concentration and operating temperature with ethanol concentrations of 1–10%; that an increase of feed flow rate can enhance the permeation rate of ethanol with the water remaining at almost the same value; that water and ethanol fluxes was increased with the temperature increase; and that the higher effect in flux increase was observed when the vapor pressure in the permeate stream was close to the ethanol vapor pressure. Better results were obtained with fermentation broth than with model solutions, indicated by the permeance and membrane selectivity. This could be attributed to by-products present in the multicomponent mixtures, facilitating the ethanol permeability. By-products analyses show that the presence of lactic acid increased the hydrophilicity of the membrane. Based on this, we believe that pervaporation with hollow membrane of ethanol produced from banana waste is indeed a technology with the potential to be applied.     

A study on toxic and essential elements in rice from the Republic of Kazakhstan: comparing the level of contamination in rice from the European Community

Selected toxic elements (total As, Cd, Cr, Hg, Pb, Sr, U and V) and essential elements (Co, Cu, Fe, Mn and Zn) were analyzed using an inductively coupled plasma mass spectrometry (ICP-MS) in unpolished and milled rice collected from Kazakhstan and milled rice from Spain and Portugal to evaluate the potential health risk to the population. Arsenic species (arsenite, arsenate, arsenobetaine, dimethylarsinate and monomethilarsonate) were analyzed using HPLC-IC-MS. From 146 samples analyzed, none of them exceeded the maximum limit set by the European Legislation for Cd or Pb or values recommended by the Codex Alimentarius. Concentrations of Sr, U and V were below LOD and those of Hg, Pb, Co and Cr between <LOD and 0.54 mg/kg (highest concentration of Cr) in milled rice. Portuguese rice samples contained the highest mean concentration of As, Hg, Pb, Co, Cr, Cu, Mn and Zn. The highest mean of arsenobetaine (0.001 mg/kg), dimethylarsinate (0.27 mg/kg) and monomethilarsonate (0.02 mg/kg) was found in Spanish rice and that of arsenite (0.30 mg/kg) in Kazakh rice. Inorganic As in samples from Kazakhstan was above the ML (0.2 mg/kg) proposed by FAO/WHO, but in seven samples from Spain and in four from Portugal were above the limit. The estimated weekly intake of total or inorganic As(III, V), Cd, Hg and Pb for rice consumption by Kazakh, Spanish and Portuguese adults and children was lower than the provisional tolerable weekly intake established by Joint FAO/WHO Expert Committee on Food Additives and the European Food Safety Authority.

     

Alcohol-assisted dyeing processes: a chemical substitution study

Dyeing processes of various yarns (wool, cotton, polyester, nylon 6 and acrylic) were studied with the aim to substitute some auxiliary agents with ethanol at low concentration. The results observed in isothermal dyeing showed a favorable effect of alcohol addition, at about 1-3% v/v, on the dye uptake, with some differences depending on fiber nature and dye class. This effect was correlated with contact angle measurements of water-ethanol solutions on the mentioned yarns, which confirmed a lower surface tension in the same concentration range. Then, laboratory tests with dye triads at programmed temperature were carried out comparing the results of standard dyeing recipes with those obtained by replacing wetting, retardant and leveling agents with ethanol. Good color imitations were generally shown with respect to standard processes. A wetting effect of ethanol was shown for all the tested yarns and dye classes, while in wool dyeing with acid, pre-metallized and reactive dyes, ethanol was suitable to replace also leveling and retarding agents. Light and wash fastnesses were also compared. Finally the environmental benefits arising from chemical substitution of auxiliary agents with ethanol were highlighted and the cost of alcohol introduction was compared with the cost saving of auxiliary substitution. A positive economic balance was obtained.     

Comparison and analysis of different approaches for estimating the human exposure to phthalate esters

The human exposure estimates for dibutyl (DBP) and bis(2-ethylhexyl) phthalate (DEHP) made by two models EUSES and ACC-Human, and by an estimation approach which utilized measured concentrations in exposure media, were compared. The approach which utilized the latest monitoring data for important exposure media, yielded median daily intakes for adult humans for DBP and DEHP of 2.7 and 5.6 microg/kg body weight per day, respectively, which were in the same range as previous estimates based on back-calculation from urinary metabolites. EUSES estimated average daily intakes of DBP and DEHP for humans that were between 8 and 13 times lower. ACC-Human does not estimate average daily intakes, but ACC-Human-estimated human milk concentrations/fugacities were more than a thousand times lower than measured concentrations/fugacities in human milk. It was concluded that the two models underestimate human exposure to phthalate esters because they consider only a few key pathways that are known to be important for other, more persistent, hydrophobic organic compounds. Further, it was shown that there are differences between the two models on the methodology for estimating concentrations in exposure media such as vegetation, milk, beef and fish. ACC-Human uses a mechanistic approach for estimating transfer through aquatic and terrestrial food chains that are known to be important for human exposure to persistent, hydrophobic organics and can, unlike EUSES, account for food chain metabolism. It proved difficult, however, to obtain organism metabolism rates needed as model inputs to ACC-Human. If exposure estimates of phthalate esters are needed, it is recommended to use an estimation approach based on high quality monitoring data as presented here and/or back-calculate daily intake from concentrations of metabolites in human urine samples from the general population.     

Contribution of spatially explicit models to climate change adaptation and mitigation plans for a priority forest habitat

Climate change will impact forest ecosystems, their biodiversity and the livelihoods they sustain. Several adaptation and mitigation strategies to counteract climate change impacts have been proposed for these ecosystems. However, effective implementation of such strategies requires a clear understanding of how climate change will influence the future distribution of forest ecosystems. This study uses maximum entropy modelling (MaxEnt) to predict environmentally suitable areas for cork oak (Quercus suber) woodlands, a socio-economically important forest ecosystem protected by the European Union Habitats Directive. Specifically, we use two climate change scenarios to predict changes in environmental suitability across the entire geographical range of the cork oak and in areas where stands were recently established. Up to 40 % of current environmentally suitable areas for cork oak may be lost by 2070, mainly in northern Africa and southern Iberian Peninsula. Almost 90 % of new cork oak stands are predicted to lose suitability by the end of the century, but future plantations can take advantage of increasing suitability in northern Iberian Peninsula and France. The predicted impacts cross-country borders, showing that a multinational strategy, will be required for cork oak woodland adaptation to climate change. Such a strategy must be regionally adjusted, featuring the protection of refugia sites in southern areas and stimulating sustainable forest management in areas that will keep long-term suitability. Afforestation efforts should also be promoted but must consider environmental suitability and land competition issues.     

Elemental Composition of Urban Aerosol Collected in Florence, Italy

An extensive investigation is in progress aiming at the characterisation of the air particulate composition in Florence. For our investigation, we use the external PIXE-PIGE beam facility of the I.N.F.N. Van de Graaff accelerator at the Physics Department of the Florence University. In order to gather information on both the longer- and shorter-time trends of the aerosol elemental composition, we are analysing both long temporal series (about 1 year) of 24-h Millipore filters collected by the health authorities in 3 different sites, and filters collected simultaneously in two of the above sites for about one month, by two streakers with one-hour resolution, providing size fractionation between particle size smaller than 2.5 µm and from 2.5 µm to 10 µm. The streakers sampling period includes two days during which the Municipality of Florence has banned the circulation of non-catalytic cars, due to the increase of NO₂ above the "recommended safety values". We present here the first obtained results for the sampling site located near a heavy traffic road.     

Tensile Behavior of Thermoplastic Films from Wheat Flours as Function of Raw Material Baking Properties

The production of bioplastics directly from wheat flour has been demonstrated to be reliable, but scarce knowledge is available on how flour characteristics may affect the performance of thermoplastic films. In this work, we first established the most suitable recipe and process for the production of extruded films and then we used eight single-cultivar wheat flours with different baking technological properties to assess how they affect the mechanical properties of thermoplastic films. The results have shown that flours from soft grain cultivars offered more rigid and deformable films than flours from hard grain cultivars. For similar hardness, the alveographic P/L ratio of the dough was inversely related to rigidity and directly related to deformability of plastic films, while the deformation energy of the dough (W) played a role only for great differences of it. The subsequent fabrication of blends between each of the flours that yielded the best film properties and polycaprolactone (PCL) at different proportions indicated that a wheat flour/PCL ratio (TWF/PCL) of 75/25 offered the most suitable films for further application. Our results are likely to be useful for improving the plasticization of flour, in that selection of wheat flours could be tailored on the properties desired for the bioplastic films.     

Detection of Torque Teno Sus Virus in Pork Bile and Liver Sausages

Torque teno viruses (TTV) are small DNA viruses widespread among humans and pigs. The clinical significance of TTV infections in either humans or pigs is uncertain. In fact, TTV viremia is highly prevalent in patients with different pathologies, but it can also be frequently observed in healthy subjects. Virus infection in pigs is considered a putative cofactor in several diseases; despite being detected frequently in healthy animals, its role still remains unknown. The present study aimed to investigate the presence of Torque teno sus virus (TTSuV) in 62 bile samples collected from pigs at slaughterhouse and in 36 fresh pork liver sausages bought at point of sale. Quantitative Real-Time PCR, confirmed that 19.4 and 58.3 % of bile and sausage samples tested positive for TTSuV, respectively. The mean viral load was established as 5.6 × 10⁴ GE/µl for bile and 7.16 × 10³ GE/g for sausages. TTSuV nucleotide sequence analysis confirmed a wide heterogeneity among the circulating TTSuV strains, which included both TTSuV1 and TTSuV2.     

Rapid,recurring, structured survey versus bioblitz for generating biodiversity data and analysis with a multispecies abundance model

A bioblitz inexpensively and quickly generates biodiversity data, but bioblitzes are often conducted with haphazard, unreplicated sampling. Results tend to be taxonomically, geographically, or temporally biased, lack metadata, and consist of lists of observed taxa that do not enable further analyses or correction for imperfect detection. A rapid, recurring, structured survey (RRSS) uses a structured sampling design and temporal and spatial replication to survey randomly selected sites on a conservation property. We participated in a loosely structured bioblitz and a subsequent RRSS at Big Canoe Creek Nature Preserve in Springville (St. Clair County), Alabama (USA) to compare observed richness derived from the 2 survey approaches. The RRSS data structure enabled us to fit models that accounted for imperfect detection to estimate abundances, occupancy probabilities, and habitat associations. The loosely structured bioblitz data could not be used in such models. We present a new integrated multispecies abundance model that we applied to avian RRSS data. Our model extension enables estimation for the community, employs data augmentation to estimate the number of undetected species, and incorporates covariates. The RRSS generated a more comprehensive and less biased list of observed taxonomic richness than the loosely structured bioblitz (e.g., 73 vs. 45 bird species and 104 vs. 63 insect families from the RRSS vs. loosely structured bioblitz, respectively). Models fit to the RRSS data identified seasonal patterns in avian community composition and allowed for estimation of habitat–occupancy relationships for insect taxa. The RRSS protocol has potential for broad transferability as a standardized, quick, and inexpensive way to inventory biodiversity and estimate ecological parameters while providing an outreach opportunity.