Evaluation and further development of the activated sludge respiration inhibition test

The activated sludge respiration inhibition test is an important bacterial test system for the determination of bacterial toxicity of chemical compounds. The exposure period recommended by OECD 209 and ISO 8192 protocols is 30 and 180 min. A modified version of the test was developed which allowed a prolonged incubation period of 27 h to enhance the possibilities of the test system. The test system with the prolonged incubation time was evaluated by the recommended reference compound 3.5-dichlorophenol and showed an EC50 of 6.3 mgl(-1) with a coefficient of variation of 12.7%. Furthermore, the use of an open test system was evaluated showing a comparable toxicity but a higher coefficient of variation than the closed test system. A storage of activated sludge for several days accompanied by a daily feed with OECD nutrient solution should be avoided, for it can cause a decreased sensitivity of the inoculum. Different statistical fit procedures were tested indicating that Weibull fit procedures were superior for extended data sets covering a wide range of concentrations whereas Gamma and Probit fits were appropriate for smaller data sets mainly restricted to the linear part of the dose response curve.     

Males as infant protectors in Hanuman langurs (Presbytis entellus) living in multimale groups – defence pattern, paternity and sexual behaviour

Hypotheses about the evolution of gregariousness and social organisation in primates are based on ecological explanations as well as on social factors such as conspecific threat (especially infanticide by males). The social explanation fits well with the conditions found in strepsirrhine primates and furthermore explains why infanticide in anthropoid primates living in one-male groups mainly occurs when the resident male (protector) is replaced. However, whether it likewise fits to the conditions in multimale groups will depend on the role of resident males as infant protectors, which has rarely been examined. We investigated long-term data of wild Hanuman langurs (Presbytis entellus) inhabiting a forest near the village of Ramnagar (southern Nepal). Twenty-two eye-witnessed attacks on infants by males were analysed in connection with male residency, paternity (DNA analyses) and sexual behaviour. Adult males played a major role in infant defence (65%). Only the genetic father or males who had been residents when the infant was conceived were observed to protect infants. Males who immigrated after a female had conceived may later attack her infant and were never observed to defend it. lt seems that the males took only copulations with potentially fertile females but not with pregnant females as clues for paternity. In the light of these results it seems likely that the risk of infanticide is an important determinant in female-male associations even in anthropoid primate multimale groups. Received: 22 December 1998 / Received in revised form: 30 April 1999 / Accepted: 1 May 1999     

Bakterielle Biotestverfahren zur Bestimmung der Toxizität von Abfällen

For a risk assessment of wastes, fast and sensitive screening methods are required to detect possible toxic effects. In this study, different leachability methods (DIN 38414, part 4; EPA 1310; EPA 1320) were used to prepare aqueous leachates from different wastes; these leachates were rested in different bacterial toxicity test systems for possible toxic effects. As bacterial toxicity tests, the luminescent bacteria test and the growth inhibition test with activated sludge bacteria were used. The test systems showed a good agreement of the results from the different leaching methods, thereby indicating the reliability of the test systems used. The luminescent bacteria inhibition test showed a higher sensitivity than the growth inhibition test which is in good accordance with literature data. We conclude that both test systems are well suited to assess the toxic potential of aqueous waste leachates.     

Effects of various fatty acid amendments on a microbial digester community in batch culture

Since biogas production is becoming increasingly important the understanding of anaerobic digestion processes is fundamental. However, large-scale digesters often lack online sensor equipment to monitor key parameters. Furthermore the possibility to selectively change fermenting parameter settings in order to investigate methane output or microbial changes is limited. In the present study we examined the possibility to investigate the microbial community of a large scale (750,000 L) digester within a laboratory small-scale approach. We studied the short-term response of the downscaled communities on various fatty acids and its effects on gas production and compared it with data from the original digester sludge. Even high loads of formic acid led to distinct methane formation, whereas high concentrations of other acids (acetic, butyric, propionic acid) caused a marked inhibition of methanogenesis coupled with an increase in hydrogen concentration. Molecular microbial techniques (DGGE/quantitative real-time-PCR) were used to monitor the microbial community changes which were related to data from GC and HPLC analysis. DGGE band patterns showed that the same microorganisms which were already dominant in the original digester re-established again in the lab-scale experiment. Very few microorganisms dominated the whole fermenting process and species diversity was not easily influenced by moderate varying fatty acid amendments - Methanoculleus thermophilus being the most abundant species throughout the variants. MCR-copy number determined via quantitative real-time-PCR - turned out to be a reliable parameter for quantification of methanogens, even in a very complex matrix like fermenter sludge. Generally the downscaled batch approach was shown to be appropriate to investigate microbial communities from large-scale digesters.     

Improving bioavailability of phosphorous from cattle dung by using phosphatase immobilized on natural clay and nanoclay

The high P retention of acidic Andisols makes necessary to increase our technological approaches in pasture management in the animal system production. Here, we evaluated the clay- or nanoclay-acid phosphatase complexes for improving phosphorus mineralization from degraded cattle dung. We implemented an immobilization mechanism of acid phosphatase (AP) using natural clays (allophanic and montmorillonite) and nanoclays as support materials. Also, we evaluated the mineralization of organic P containing in decomposed cattle dung with clay- and nanoclay-AP complexes by incubation studies. Clays and nanoclays were characterized by microscopy techniques as atomic force and confocal-laser scanning microscopy. We found that these support materials stabilized AP by encapsulation. Our results showed that immobilization on allophanic or montmorillonite materials improved both the specific activity (4-48%) and the V_max (28-38%) of AP. Moreover, the enzyme had a better performance when immobilized on clay and nanoclay from Andisol than on montmorillonite materials. Phosphorous mineralization of cattle dung was regulated by water-soluble P present in the dung and P re-adsorption on allophanic materials. However, we were able to detect a potential capacity of AP immobilized on allophanic nanoclays as the best alternative for P mineralization. Further research with initially low water-soluble P containing organic materials is required to quantify the P mineralization potential and bioavailability of P from dung.     

Fractionation of technical p-nonylphenol with preparative capillary gas chromatography

A fractionation procedure for technical p-nonylphenol using preparative capillary gas chromatography (pcGC) was developed and evaluated for its potential applicability in effect-directed analysis (EDA). The instrument is composed of (1) a preparative unit equipped with a cold injection system (CIS), two preparative fraction collectors (PFCs) with six fraction traps each, and a flame ionization detector (FID) and (2) an analytical unit sharing the same GC oven and equipped with another CIS and mass spectrometric detection (MSD) for isomer identification. The pcGC methodology used in this study is characterized by a high reproducibility of retention times and peak areas. This provides the fractionation of nonylphenol isomers into 11 fractions containing 77-552microg of isomers collected after 600 single injections. This yield is sufficient to allow subsequent biotesting in the E-screen assay.     

Improving the precision of sample-based forest damage inventories through two-phase sampling and post-stratification using remotely sensed auxiliary information

Many countries have a national forest inventory (NFI) designed to produce statistically sound estimates of forest parameters. However, this type of inventory may not provide reliable results for forest damage which usually affects only small parts of the forest in a country. For this reason, specially designed forest damage inventories are performed in many countries, sometimes in coordination with the NFIs. In this study, we evaluated a new approach for damage inventory where existing NFI data form the basis for two-phase sampling for stratification and remotely sensed auxiliary data are applied for further improvement of precision through post-stratification. We applied Monte Carlo sampling simulation to evaluate different sampling strategies linked to different damage scenarios. The use of existing NFI data in a two-phase sampling for stratification design resulted in a relative efficiency of 50 % or lower, i.e., the variance was at least halved compared to a simple random sample of the same size. With post-stratification based on simulated remotely sensed auxiliary data, there was additional improvement, which depended on the accuracy of the auxiliary data and the properties of the forest damage. In many cases, the relative efficiency was further reduced by as much as one-half. In conclusion, the results show that substantial gains in precision can be obtained by utilizing auxiliary information in forest damage surveys, through two-phase sampling, through post-stratification, and through the combination of these two approaches, i.e., post-stratified two-phase sampling for stratification.     

Are older workers more active copers? Longitudinal effects of age‐contingent coping on strain at work

This study addresses coping processes as explanation of age‐related differences in strain experience. Based on the life‐span theory of control, we posit that older workers employ more active problem‐focused and more active emotion‐focused coping strategies than younger workers, which should mediate age effects on strain at work. The correlation between age and passive avoidance coping, in contrast, is expected to be qualified by external resources such as job control. Hypotheses were tested in a two‐wave panel study (8 months lag) with 634 workers (age range 16–65 years). Job demands were considered as control variables. As predicted, older as compared with younger workers reported more active problem‐focused coping, which mediated age differences on strain in the longitudinal analysis. No mediation was found for active emotion‐focused coping. Moreover, age‐contingent effects of passive avoidance coping were moderated by job control. When job control was low, younger as compared with older workers reported more avoidance coping, which in turn decreased strain in the longitudinal analysis. Finally, reverse longitudinal effects of age‐contingent strain on active problem‐focused and active emotion‐focused coping provide initial evidence for age‐contingent resource spirals. Together, the results reveal specific strengths of older workers for stress management at work. Copyright © 2015 John Wiley & Sons, Ltd.     

MnFe2O4 nanoparticles as new catalyst for oxidative degradation of phenol by peroxydisulfate

Manganese ferrite nanopowder was prepared by thermal decomposition at 400°C of the gel synthesized from manganese and iron nitrates and polyvinyl alcohol. X-ray diffractometry evidenced that manganese ferrite was formed as single crystalline phase at this temperature. Scanning electron microscope images evidenced the formation of very fine spherical particles(d 11 nm) of manganese ferrite, with specific surface area of 147 m~2/g.The powder obtained at 400°C was used as a catalyst for the oxidative degradation of phenol in aqueous solutions, in the presence of potassium peroxydisulfate as oxidant. High phenol removal efficiencies above 90% were reached at: pH 3–3.5, phenol initial concentration around 50 mg/L, peroxydisulfate:phenol mass ratio 10:1, and catalyst dose 3 g/L. Total organic carbon measurements showed that the degradation of phenol goes, under these conditions, to mineralization in an extent of 60%.     

Effect of some environmentally degradable materials on the pyrolysis of plastics II: influence of cellulose and lignin on the pyrolysis of complex mixtures

Pyrolysis of polymer mixtures with a composition similar to that of municipal plastic waste containing polyvinyl chloride (PVC) and of municipal plastic waste free of PVC was performed in the presence of components of biomass, namely lignin, cellulose, or both. The pyrolysis products were characterized by standard methods utilized in the petrochemical industry, i.e., paraffins-isoparaffinsolefins-naphthenes-aromatics analysis, proton nuclear magnetic resonance and infrared spectroscopy, and gas chromatography-mass spectrometry. Up to 3 wt% lignin, cellulose, or both in mixed polymers changed the material balance of pyrolysis by decreasing the amount of waxy products. The presence of both PVC and biomass components significantly changed the material balance by decreasing the waxy product yield and increasing the gas and coke yield. The composition of all pyrolysis products was also modified with the addition of PVC, components of biomass, or both.