Evaluation of a unified regional air-quality modeling system (AURAMS) using PrAIRie2005 field study data: The effects of emissions data accuracy on particle sulphate predictions

The effects of the accuracy of major-point source emissions input data on the predictions of a regional air-quality model (AURAMS) were investigated through a series of scenario simulations. The model domain and time period were chosen to correspond to that of PrAIRie2005, an air-quality field study with airborne and ground-based mobile measurement platforms that took place between August 12th and September 7th, 2005, over the city of Edmonton, Alberta, Canada. The emissions data from standard sources for three coal-fired power-plants located west (typically upwind) of the city were compared to the continuous emissions monitoring system (CEMS) taking place at the time of the study – the latter showed that the original emissions inventory data considerably overestimated NO_x, SO₂, and primary particulate emissions during the study period. Further field investigation (stack sampling) in the fall of 2006 showed that the measured primary particle size distribution and chemical speciation for the emissions were strikingly different from the distribution and speciation originally used in the model. The measured emissions were used to scale existing emissions data in accord with the CEMS and in-stack measurements.The effects of these improvements to the emissions data were examined sequentially in nested AURAMS simulations (finest horizontal resolution 3 km), and were compared to airborne aerosol mass spectrometer (Aerodyne AMS) measurements of particle sulphate, and particle distributions from an airborne passive cavity aerosol spectrometer probe (PCASP). The emissions of SO₂ had the greatest impact on predicted PM₁ sulphate, while the primary particle size distribution and chemical speciation had a smaller role. The revised emissions data greatly improved the comparisons between observations and model values, though over-predictions of fine-mode sulphate still occur near the power-plants, with the use of the revised emissions data. The modified emissions also had a significant impact on the larger particles of the particulate matter, with more primary PM in sizes greater than 1 μm diameter than had previously been estimated, and higher large particle concentrations close to the power-plants.     

Valuation of Spatial Configurations and Forest Types in the Southern Appalachian Highlands

Site-specific estimates of the values of spatial configuration and forest composition are presented. Amenity values of forest patches are found to vary the most by urban and sprawling development patterns of specific areas and forest types. For example, smaller patches of deciduous forest are more highly valued in the urban and sprawling areas of Greensboro, North Carolina, whereas larger patches of deciduous forest are more highly valued in the urban and sprawling areas of Greenville, South Carolina. Within the Greenville and Greensboro areas, visible landscape complexity is highly valued for deciduous and evergreen forest patches, whereas lower visible landscape complexity, i.e., smoothly trimmed forest patch boundaries, is highly valued for mixed forest patches.     

Toxicity of imidazolium salt with anion bromide to a phytoplankton Selenastrum capricornutum: effect of alkyl-chain length

Room-temperature ionic liquids are regarded as environmentally benign alternatives to volatile organic solvents. However, the product designs for this promising group of compounds should take account, not only the technological needs, but also the eco-toxicological hazards. Therefore, this study aimed to evaluate the toxicity of some important ionic liquids on the growth of the freshwater alga, Selenastrum capricornutum. The ionic liquids examined in this study included 1-propyl-3-methylimidazolium [PMIM], 1-butyl-3-methylimidazolium [BMIM], 1-hexyl-3-methylimidazolium [HMIM] and 1-octyl-3-methylimidazolium [OMIM] with a bromide anion. The susceptibility of alga to ionic liquids was strongly dependent on the alkyl-chain length. According to our results, a longer alkyl-chain resulted in stronger inhibition of algal growth. In general, the toxicity could be summarized as decreasing in the following order: [OMIM]>[HMIM]>[BMIM]>or=[PMIM]. Among the ionic liquids examined, [OMIM] [Br] was found to be most toxic to S. capricornutum, with EC(50) values ranging from 26.3 microM to 54.9 microM after an incubating time of 96 h. Although [BMIM] [Br] and [PMIM] [Br] was relatively less toxic than [OMIM] and [HMIM], their toxicity increased as increasing the incubation time from 48 h to 96 h. This fact indicates that these kinds of ionic liquids may become more toxic after being released and contacted to freshwater ecosystem.     

Screening of Cucumis sativus as a new arsenic-accumulating plant and its arsenic accumulation in hydroponic culture

Phytoextraction is a remediation technology with a promising application for removing arsenic (As) from soils and waters. Several plant species were evaluated for their As accumulation capacity in hydroponic culture amended with As. Cucumis sativus (cucumber) displayed the highest tolerance against As among 4 plants tested in this study (corn, wheat, sorghum and cucumber). The germination ratio of Cucumis sativus was more than 50% at the high concentration of 5,000 mg-As/l. In Cucumis sativus grown in a solution contaminated with 25 mg-As/l, the accumulated As concentrations in the shoot and root were 675.5 ± 11.5 and 312.0 ± 163.4 mg/kg, respectively, and the corresponding values of the translocation and bioaccumulation factors for As were 1.9 ± 0.9 and 21.1 ± 8.4, respectively. These results indicate Cucumis sativus is to be a candidate plant for phytoextraction of As from soils and water.     

Potential application of sludge produced from coal mine drainage treatment for removing Zn(II) in an aqueous phase

Various analyses of physico-chemical characteristics and batch tests were conducted with the sludge obtained from a full-scale electrolysis facility for treating coal mine drainage in order to find the applicability of sludge as a material for removing Zn(II) in an aqueous phase. The physico-chemical analysis results indicated that coal mine drainage sludge (CMDS) had a high specific surface area and also satisfied the standard of toxicity characteristic leaching procedure (TCLP) because the extracted concentrations of certain toxic elements such as Pb, Cu, As, Hg, Zn, and Ni were much less than their regulatory limits. The results of X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the CMDS mainly consists of goethite (70%) and calcite (30%) as a weight basis. However, the zeta potential analysis represented that the CMDS had a lower isoelectric point of pH (pH_IEP) than that of goethite or calcite. This might have been caused by the complexation of negatively charged anions, especially sulfate, which usually exists with a high concentration in coal mine drainage. The results of Fourier transform infrared (FT-IR) spectrometry analysis revealed that Zn(II) was dominantly removed as a form of precipitation by calcite, such as smithsonite [ZnCO₃] or hydrozincite [Zn₅(CO₃)₂(OH)₆]. Recycling sludge, originally a waste material, for the removal process of Zn(II), as well as other heavy metals, could be beneficial due to its high and speedy removal capability and low economic costs.     

Commercial landscape of noninvasive prenatal testing in the United States

Cell-free fetal DNA-based noninvasive prenatal testing (NIPT) could significantly change the paradigm of prenatal testing and screening. Intellectual property (IP) and commercialization promise to be important components of the emerging debate about clinical implementation of these technologies. We have assembled information about types of testing, prices, turnaround times, and reimbursement of recently launched commercial tests in the United States from the trade press, news articles, and scientific, legal, and business publications. We also describe the patenting and licensing landscape of technologies underlying these tests and ongoing patent litigation in the United States. Finally, we discuss how IP issues may affect clinical translation of NIPT and their potential implications for stakeholders. Fetal medicine professionals (clinicians and researchers), genetic counselors, insurers, regulators, test developers, and patients may be able to use this information to make informed decisions about clinical implementation of current and emerging noninvasive prenatal tests. © 2013 John Wiley & Sons, Ltd.     

Development of a leaching assessment framework for the utilization of coal ash at South Korean mine reclamation sites

Coal-based power generates large quantities of coal ash in South Korea. However, coal ash recycling is still inactive and most wasted coal ash is buried in landfills. Recently, beneficial uses of coal ash such as in mine reclamation sites has been increasingly considered; however, as a result of legal limitations due to environmental concerns, the utilization of coal ash at mine reclamation sites has procrastinated. Consequently, to resolve this issue, the relevant environmental impact of coal ash must be considered. Therefore, a leaching assessment framework to assess the environmental impact of coal ash utilization at South Korean mine reclamation sites is presented. The framework was used to identify leaching mechanisms and support an assessment of the environmental impact of coal ash usage at mine reclamation sites in South Korea. This framework could provide guidance with regard to designing more realistic leaching procedures appropriate for all mine conditions and could support the development of regulations and protocols for future environment-friendly coal ash usage.