Development of Layered Sediment Structure and its Effects on Pore Water Transport and Hyporheic Exchange

Hyporheic exchange is known to provide an important control on nutrient and contaminant fluxes across the stream-subsurface interface. Similar processes also mediate interfacial transport in other permeable sediments. Recent research has focused on understanding the mechanics of these exchange processes and improving estimation of exchange rates in natural systems. While the structure of sediment beds obviously influences pore water flow rates and patterns, little is known about the interplay of typical sedimentary structures, hyporheic exchange, and other transport processes in fluvial/alluvial sediments. Here we discuss several processes that contribute to local-scale sediment heterogeneity and present results that illustrate the interaction of overlying flow conditions, the development of sediment structure, pore water transport, and stream-subsurface exchange. Layered structures are shown to develop at several scales within sediment beds. Surface sampling is used to analyze the development of an armor layer in a sand-and-gravel bed, while innovative synchrotron-based X-ray microtomography is used to observe patterns of grain sorting within sand bedforms. We show that layered bed structures involving coarsening of the bed surface increase interfacial solute flux but produce an effective anisotropy that favors horizontal pore water transport while limiting vertical penetration.     

Comparative statistical study of hourly precipitation determined by radar-based Stage IV and ground-based methods in the North Central United States

Detailed hourly precipitation data are required for long-range modeling of dispersion and wet deposition of particulate matter and water-soluble pollutants using the CALPUFF model. In sparsely populated areas such as the north central United States, ground-based precipitation measurement stations may be too widely spaced to offer a complete and accurate spatial representation of hourly precipitation within a modeling domain. The availability of remotely sensed precipitation data by satellite and the National Weather Service array of next-generation radars (NEXRAD) deployed nationally provide an opportunity to improve on the paucity of data for these areas. Before adopting a new method of precipitation estimation in a modeling protocol, it should be compared with the ground-based precipitation measurements, which are currently relied upon for modeling purposes. This paper presents a statistical comparison between hourly precipitation measurements for the years 2006 through 2008 at 25 ground-based stations in the north central United States and radar-based precipitation measurements available from the National Center for Environmental Predictions (NCEP) as Stage IV data at the nearest grid cell to each selected precipitation station. It was found that the statistical agreement between the two methods depends strongly on whether the ground-based hourly precipitation is measured to within 0.1 in/hr or to within 0.01 in/hr. The results of the statistical comparison indicate that it would be more accurate to use gridded Stage IV precipitation data in a gridded dispersion model for a long-range simulation, than to rely on precipitation data interpolated between widely scattered rain gauges.

Implications:

The current reliance on ground-based rain gauges for precipitation events and hourly data for modeling of dispersion and wet deposition of particulate matter and water-soluble pollutants results in potentially large discontinuity in data coverage and the need to extrapolate data between monitoring stations. The use of radar-based precipitation data, which is available for the entire continental United States and nearby areas, would resolve these data gaps and provide a complete and accurate spatial representation of hourly precipitation within a large modeling domain.     

Earth-tide-induced fluctuations in the salinity of an inland river,New South Wales,Australia: a short-term study

Wybong Creek discharges salts into the agriculturally and industrially important Hunter River in New South Wales, Australia. Abrupt increases in salinity occur periodically in the mid-Wybong Creek catchment. In order to understand the processes which cause these abrupt increases, changes in surface and groundwater were investigated. It is shown that salinity increases can be attributed to highly discrete groundwater discharge directly into the river from below. Hourly electrical conductivity data measured in the river showed regular, diurnal electrical conductivity fluctuations of up to 350 μS cm^?1. These fluctuations could not be attributed to barometric pressure, temperature, or evapotranspiration. Instead, a similar periodicity in surface water electrical conductivity and groundwater height in nearby groundwater wells was found. Fluctuations were of similar periodicity to the orthotides which cause fluctuations in surface water height and are induced by Earth tides. The geology in the mid-catchment area indicates conditions are optimal for Earth tides to impact groundwater. The reporting of orthotidal changes in water chemistry in this article is believed to be the first of its kind in the scientific literature, with the large fluctuations noted having important implications for water monitoring and management in the catchment. Further research investigating Earth-tide-induced phases of groundwater heights will better constrain the relationships between surface water chemistry and groundwater height.     

Rainwater toxicity and contamination study from São Paulo Metropolitan Region, Brazil

Wet deposition is an important process that removes pollutants from the atmosphere and transfers them to waters and soil. The goal of this study was to assess the biological effects of the atmospheric contamination of rainwater in the metropolitan area of São Paulo (MASP) using Daphnia similis, Ceriodaphnia dubia, and Vibrio fischeri. Experimental assays were carried out according to standard toxicity methodology. Twenty-three rainwater samples were collected from October 2007 to December 2008, at the Nuclear Research Institute (IPEN), in MASP. Major ions were determined by ionic chromatography, which showed NH₄ ⁺ and NO₃ ^? as prevalent ions. Ecotoxicological results confirmed toxic potential of rainwater, as all samples were toxic to D. similis and C. dubia. The V. fischeri luminescence reduction confirmed those negative effects of rainwater and percentage inhibition of relative luminescence ranged from 0.2 to 0.9 for 16 samples. Worse conditions were observed during the rainy season, suggesting convective rains are more effective in transferring contaminants and toxicity from atmosphere to surface.     

Cumulative influences of a small city and former mining activities on the sediment quality of a subtropical estuarine protected area

This study aimed to evaluate the sediment quality in the estuarine protected area known as Cananéia-Iguape-Peruíbe (CIP-PA), located on the southeastern coast of Brazil. The study was designed considering possible negative effects induced by the city of Cananéia on the sediment quality of surrounding areas. This evaluation was performed using chemical and ecotoxicological analyses. Sediments were predominantly sandy, with low CaCO₃ contents. Amounts of organic matter varied, but higher contents occurred closer to the city, as well as did Fe and Total Recoverable Oils and Greases (TROGs) concentrations. Contamination by Cd and Cu was revealed in some samples, while concentrations of Zn were considered low. Chronic toxicity was detected in all tested sediments and acute toxicity occurred only in sediments collected near the city. The principal component analysis (PCA) revealed an association among Cd, Cu, Fe, TROG, fines, organic matter, CaCO₃, and chronic toxicity, whereas acute toxicity was found to be associated with Zn and mud. However, because Zn levels were low, acute toxicity was likely due to a contaminant that was not measured. Results show that there is a broad area within the CIP-PA that is under the influence of mining activities (chronic toxicity, moderate contamination by metals), whereas poorer conditions occur closer to Cananéia (acute toxicity); thus, the urban area seems to constitute a relevant source of contaminants for the estuarine complex. These results show that contamination is already capable of producing risks for the local aquatic biota, which suggests that the CIP-PA effectiveness in protecting estuarine biota may be threatened.     

Beyond ‘just’ flood risk management: the potential for—and limits to—alleviating flood disadvantage

Regional Environmental Change - The threat of flooding poses a considerable challenge for justice. Not only are more citizens becoming exposed to risk, but they are expected to play increasingly...     

Augmenting Watershed Model Calibration with Incorporation of Ancillary Data Sources and Qualitative Soft Data Sources

Watershed simulation models such as the Soil & Water Assessment Tool (SWAT) can be calibrated using “hard data” such as temporal streamflow observations; however, users may find upon examination of model outputs, that the calibrated models may not reflect actual watershed behavior. Thus, it is often advantageous to use “soft data” (i.e., qualitative knowledge such as expected denitrification rates that observed time series do not typically exist) to ensure that the calibrated model is representative of the real world. The primary objective of this study is to evaluate the efficacy of coupling SWAT‐Check (a post‐evaluation framework for SWAT outputs) and IPEAT‐SD (Integrated Parameter Estimation and Uncertainty Analysis Tool‐Soft & hard Data evaluation) to constrain the bounds of soft data during SWAT auto‐calibration. IPEAT‐SD integrates 59 soft data variables to ensure SWAT does not violate physical processes known to occur in watersheds. IPEAT‐SD was evaluated for two case studies where soft data such as denitrification rate, nitrate attributed from subsurface flow to total discharge ratio, and total sediment loading were used to conduct model calibration. Results indicated that SWAT model outputs may not satisfy reasonable soft data responses without providing pre‐defined bounds. IPEAT‐SD provides an efficient and rigorous framework for users to conduct future studies while considering both soft data and traditional hard information measures in watershed modeling.     

Differential blood counting in fish as a non-destructive biomarker of water contamination exposure

Differential white blood cell counting was performed on blood from the fish species Oreochromis niloticus and was used as an in situ indicator of the species’ exposure to contamination. Ten young fish were collected in an area influenced by the discharge of effluents and from a fish farm (control group). The fish were anesthetized and caudal puncture was used to collect the blood. Differential white blood cell counting was performed, as well as the counting of total leukocytes and thrombocytes (in 2000 cells). Physicochemical parameters of the water from both sites were analyzed. The water from the polluted area was found to have high conductivity and low levels of dissolved oxygen, factors that indicate poor environmental quality. Fish collected from the polluted site presented higher percentages of eosinophils and monocytes and fewer thrombocytes because of exposure to pollution and hypoxic conditions. The differential white blood cell count represents a suitable biomarker of environmental health and provides a tool for biomonitoring water quality.     

INSIGHT: a framework for determining impacts of changes in land and water policies.

CSIRO Sustainable Ecosystems is constructing a spatially explicit modelling system capable of exploring alternative land and water policy alternatives against plausible price, cost, and climate scenarios for the next 20 years. INSIGHT will be used to identify the likely impacts of land and water policy options on regional economies and structural adjustment. Flowcharts have been constructed for most of the major crop and pasture and associated economic models for commodities produced in the Lachlan River Catchment of New South Wales. This enabled the most important components and interrelationships within these models to be readily identified. The next step has been to construct models at the regional scale that contain the essential elements of the more-detailed point models. The paper describes the progress to date in describing these models, and how they have been integrated into a coordinated agricultural crop production evaluation system.