The use of environmental metabolomics to determine glyphosate level of exposure in rapeseed (Brassica napus L.) seedlings

Metabolic profiling in plants can be used to differentiate between treatments and to search for biomarkers for exposure. A methodology for processing Ultra-High-Performance Liquid Chromatography-Diode-Array-Detection data is devised. This methodology includes a scheme for selecting informative wavelengths, baseline removal, retention time alignment, selection of relevant retention times, and principal component analysis (PCA). Plant crude extracts from rapeseed seedling exposed to sublethal concentrations of glyphosate are used as a study case. Through this approach, plants exposed to concentrations down to 5 μM could be distinguished from the controls. The compounds responsible for this differentiation were partially identified and were different from those specific for high exposure samples, which suggests that two different responses to glyphosate are elicited in rapeseed depending on the level of exposure. The PCA loadings indicate that a combination of other metabolites could be more sensitive than the response of shikimate to detect glyphosate exposure.     

Application of a Chemical Mass Balance Receptor Model to Respirable Particulate Matter in Mexico City

Mexico City frequently experiences high levels of air pollution. This is due mainly to its topography and meteorology that suppress pollutant diffusion and dispersion. The atmospheric mixing is extremely poor, especially during the dry winter months. The levels of certain pollutants, such as particulate matter, are of concern since they have severe effects on public health. Visibility deterioration

is one of the most noticeable effects in large cities. Biological effects of particulate matter on man and animals, ranging from mild eye irritation to death, have been reported. The effects depend on the size of the particles, their solubility, and toxicity. The main objective of this paper is to present the results of a chemical mass balance receptor model applied to a well-characterized data set of particulate matter collected in the Mexico City Metropolitan Area (MCMA). Samples of particulate matter were collected using a denuder and a Hi-Vol system for the respirable fraction and total suspended particles, respectively.

In this paper the analysis of a database consisting of the chemical composition of 33 samples of respirable particulate matter (aerosols with diameter less than 2.5 μm) is presented. The 12-hour samples were acquired during day and night periods in a typical medium-income neighborhood from December 19, 1989 through February 5, 1990.

The results show that the main contributors to suspended particles are vehicles without catalytic converters and heavy-duty diesel vehicles. The contribution of refineries, smelters, cement plants, resuspended dust, natural sources, and secondary aerosols were taken into account. In particular, the vehicles without catalytic converters represent the major contribution to PM2.5. They contribute with 50% during the day and 38% at night. Most of the source profiles were taken from the model library SPECIATE EPA. However, native profiles for soil, vehicles, and refinery were designed.     

The microbiota of an unpolluted calcareous soil faces up chlorophenols: Evidences of resistant strains with potential for bioremediation

To highlight the effects of a variety of chlorophenols (CP) in relation to the response of an indigenous bacterial community, an agricultural Mediterranean calcareous soil has been studied in microcosms incubated under controlled laboratory conditions. Soil samples were artificially polluted with 2-monochlorophenol (MCP), 2,4,6-trichlorophenol (TCP) and pentachlorophenol (PCP), at concentrations ranging from 0.1 up to 5000 mg kg⁻¹. Both activity and composition of the microbial community were assessed during several weeks, respectively, by respirometric methods and PCR-DGGE analysis of extracted DNA and RNA. Significant decreases in soil respirometric values and changes in the bacterial community composition were observed at concentrations above 1000 mg kg⁻¹ MCP and TCP, and above 100 mg kg⁻¹ PCP. However, the persistence of several active bacterial populations in soil microcosms contaminated with high concentration of CP, as indicated by DGGE fingerprints, suggested the capacity of these native bacteria to survive in the presence of the pollutants, even without a previous adaptation or contact with them.The isolation of potential CP degraders was attempted by culture plating from microcosms incubated with high CP concentrations. Twenty-three different isolates were screened for their resistance to TCP and PCP. The most resistant isolates were identified as Kocuria palustris, Lysobacter gummosus, Bacillus sp. and Pseudomonas putida, according to 16S rRNA gene homology. In addition, these four isolates also showed the capacity to reduce the concentration of TCP and PCP from 15% to 30% after 5 d of incubation in laboratory assays (initial pollutant concentration of 50 mg L⁻¹). Isolate ITP29, which could be a novel species of Bacillus, has been revealed as the first known member in this bacterial group with potential for CP bioremediation applications, usually wide-spread in the soil natural communities, which has not been reported to date as a CP degrader.     

Determination of some heavy metal levels in soft drinks on the Ghanaian market using atomic absorption spectrometry method

Twenty-three soft drink samples (i.e., four pineapple-based fruit drinks, eight citrus-based fruit juices, one soya-based drink, three cola carbonated drinks, one apple-based fruit drink, and six cocktail fruit drinks) were randomly purchased from retail outlets in an urban market in Accra and analyzed for the concentrations of iron, cobalt, cadmium, zinc, lead, and copper using flame atomic absorption spectrometry. The mean concentration of iron and cadmium were 0.723?±?0.448 mg/L and 0.032?±?0.012 mg/L, respectively. The mean cobalt concentration was 0.071?±?0.049 mg/L, while the mean Zn concentration in the samples was 0.060?±?0.097 mg/L. The mean concentrations of Pb and Cu in the fruit juice samples were 0.178?±?0.091 mg/L and 0.053?±?0.063 mg/L respectively. About 78 % of the samples exceeded the United States Environmental Protection Agency (USEPA) maximum contaminant level of 0.3 mg/L prescribed for iron, whereas all the samples exceeded the USEPA maximum contaminant level of 0.005 mg/L prescribed for cadmium. About 91 % of the samples exceeded the EU maximum contaminant level prescribed for lead insoft drinks.     

Polycyclic aromatic hydrocarbon exhaust emissions from different reformulated diesel fuels and engine operating conditions

The study of light-duty diesel engine exhaust emissions is important due to their impact on atmospheric chemistry and air pollution. In this study, both the gas and the particulate phase of fuel exhaust were analyzed to investigate the effects of diesel reformulation and engine operating parameters. The research was focused on polycyclic aromatic hydrocarbon (PAH) compounds on particulate phase due to their high toxicity. These were analyzed using a gas chromatography–mass spectrometry (GC–MS) methodology.Although PAH profiles changed for diesel fuels with low-sulfur content and different percentages of aromatic hydrocarbons (5–25%), no significant differences for total PAH concentrations were detected. However, rape oil methyl ester biodiesel showed a greater number of PAH compounds, but in lower concentrations (close to 50%) than the reformulated diesel fuels. In addition, four engine operating conditions were evaluated, and the results showed that, during cold start, higher concentrations were observed for high molecular weight PAHs than during idling cycle and that the acceleration cycles provided higher concentrations than the steady-state conditions. Correlations between particulate PAHs and gas phase products were also observed.The emission of PAH compounds from the incomplete combustion of diesel fuel depended greatly on the source of the fuel and the driving patterns.     

The production of uneven access to land and water in peri-urban spaces: de facto privatisation in greater Accra

ABSTRACT

Peri-urban spaces are frontiers of privatisation where inequalities in access to land and water evolve. In this article, we analyse a particular mode of land and water privatisation in peri-urban spaces of the Greater Accra Metropolitan Area (GAMA), Ghana. We illustrate that in the domain of land, traditional authorities tend to act as private owners rather than custodians of customary land, while in the domain of water, multiple private water providers have emerged next to the official water utility. A combined reading and analysis of these processes as forms of de facto privatisation contributes to understanding the similarities in the control over and access to land and water in peri-urban spaces. We show that in the de facto privatised control context of the peri-urban GAMA, access gained to land and water has to be actively maintained. Both gaining and maintaining access exhibit socio-economic inequalities and this is particularly so in the case of maintaining access. The article is a call for a better connection between land and water studies in order to deepen understanding of the processes at play in peri-urban spaces.     

Place attachment and place identity in natives and non-natives

Place attachment is an affective bond that people establish with specific areas where they prefer to remain and where they feel comfortable and safe. Place identity, however, has been defined as a component of personal identity, a process by which, through interaction with places, people describe themselves in terms of belonging to a specific place. Most research has observed positive correlations between these variables in populations that have maintained ongoing interactions over long periods of time. This work presents two studies in which we compare place attachment to place identity in samples differentiated according to birthplace and length of residence, and the magnitude of these bonds to different places. The results of the first study revealed differences between intensity of attachment and identity depending on place of origin and place assessed. The second study found that identity and attachment tend to coincide in natives, while individuals from other places give higher scores for attachment than for identity. Results from the two studies have enabled us to consider that place attachment develops before place identity, at least in the case of the non-natives. Both studies reveal that bonds are stronger with the city than with the neighbourhood, but that attachment and identity with the island are stronger than either of them.     

Separation of the strength and selectivity of the microbiological effect of synthetic dyes by spectral mapping technique

The growth inhibitory effect of 30 synthetic dyes on 22 bacteria (test organisms) belonging to various taxonomic groups was determined. The strength (potency) and selectivity of the biological effect were separated by the spectral mapping technique, reducing the dimensionality of the selectivity maps to two by the nonlinear mapping technique. The relationship between biological effect and physicochemical parameters of dyes was elucidated by stepwise regression analysis. It has been established that the strength of the effect of anthracene and trityl derivatives was higher than that of azobenzene dyes and significantly depended on the hydrophobicity of the compound. The selectivity of the effect also depended on hydrophobicity and on the nonpolar unsaturated surface area of the dyes. Gram negative and Gram positive bacteria differed in the strength and selectivity of their response to dyes indicating the marked impact of the taxonomical position on the response. Contrary to other multivariate mathematical statistical methods biological activity may be divided by SPM into potency and selectivity values, therefore, application of the technique in future QSAR studies is highly recommended.