A method for supporting the design of efficient heating systems using EU product policy data

The design of heating, ventilation and air conditioning systems is still a challenging engineering task which requires experienced and informed decision-making. These systems have a great energy-saving potential at the system level rather than at the level of the individual products of which they are composed. European environmental product policies have been very useful in facilitating a homogeneous rating scheme which can be used to compare the energy performance of different products that provide the same service. This paper proposes a simplified design method which uses the performance of components that are regulated by European product policies to obtain the overall performance of heating systems in residential buildings. It is a flexible method and allows different product configurations to be assessed so as to optimise the system performance during the design phase. The method is tested on a real case study with domestic hot water and space heating systems. The case study shows the potential for improving the heating systems according to the performance levels of its products currently available in the market. Results of the domestic hot water system show that upgrading its storage tank to the maximum energy class (A⁺) could bring the highest energy savings ( 4162 kWh/y).     

Monotonic aspects of the mechanical behaviour of bottom ash from municipal solid waste incineration and its potential use for road construction

Municipal solid waste incineration (MSWI) bottom ash is an atypical granular material because it may include industrial by-products that result from the incineration of domestic waste. The prospects for the beneficial use of this particular material mainly lie in the field of road construction, as a substitute for the traditional natural aggregates. However, its mechanical properties are still little known, particularly in term of stiffness and deformability, characteristics that are essential to the construction of a durable roadway. The purpose of this paper is to describe better the mechanical behaviour of this recycled material. In order to reach this objective, a large experimental campaign is presented. The first part of this paper presents and comments in detail on the results obtained from static monotonic tests. Oedometric and triaxial shear tests were performed on MSWI bottom ash both before and after treatment with a specific hydraulic binder. These tests allow specification of the mechanical characteristics of the MSWI bottom ash, such as the initial Young's modulus, Poisson's ratio, the compressibility index, the friction angle, and the contracting or dilating behaviour of the material. The results reveal a mechanical behaviour similar to that of initially dense standard materials (sands, unbound granular materials) and a dependence on the applied average pressure, characteristic of the mechanical behaviour of granular media. More laboratory data on other samples of MSWI bottom ash are required to ensure that this comparison is statistically valid.     

Evidence for enhanced dissipation of chlorpyrifos in an agricultural soil inoculated with Serratia rubidaea strain ABS 10

The insecticide ¹⁴C-chlorpyrifos was found mineralized in a Tunisian soil with repeated exposure to it. From this soil, a bacterial strain was isolated that was able to grow in a minimal salt medium (MSM) supplemented with 25 mg L^?1 of chlorpyrifos. It was characterized as Serratia rubidaea strain ABS 10 using morphological and biochemical analyses, as well as 16S rRNA sequencing. In a liquid culture, the S. rubidaea strain ABS 10 was able to dissipate chlorpyrifos almost entirely within 48 h of incubation. Although the S. rubidaea strain ABS 10 was able to grow in an MSM supplemented with chlorpyrifos and dissipate it in a liquid culture, it was not able to mineralize ¹⁴C-chlorpyrifos. Therefore, it can be concluded that the dissipation capability of this bacteria might be attributed to its capacity to adsorb CHL. It can also be ascribed to other reasons such as the formation of biogenic non-extractable residues. In both non-sterile and sterile soil inoculated with S. rubidaea strain ABS 10, chlorpyrifos was more rapidly dissipated than in controls with DT₅₀ of 1.38 and 1.05 days, respectively.

     

Soil and plant biodegradation of chlorpyrifos in fields of cauliflower and brussels sprouts crops

For the protection of early and summer cauliflower and brussels sprouts crops against root fly, the insecticide chlorpyrifos was applied at planting onto soil around the stem of the plant, or in the planting line. In the soil, chlorpyrifos (1) was transformed into the insecticide metabolites oxon, 0,0‐diethyl‐0‐(3,5,6‐tri‐chloro‐2‐pyridinyl) phosphate (2), and 3,5,6‐trichloro‐2‐pyridinol (3). The soil half life time of chlorpyrifos could be 2.8 times greater (42 days relative to 15 days) when the field history as to cauliflower monoculture and insecticide treatments was short (1 year), than when it was long (8 years). Rains and season also had cumulative effects on the chlorpyrifos soil half life times. In the leaves of cabbage, chlorpyrifos and compound 3 were observed at concentrations which were higher, especially when their soil concentrations were high. Chlorpyrifos and compounds 2 and 3 however were not detected in the “flower” of cauliflower, nor in the brussels sprouts itself, the limit of sensitivity being 0.02 ppm of fresh weight.     

Short-term variability and control of phytoplankton photosynthetic activity in a macrotidal ecosystem (the Strait of Dover, eastern English Channel)

Short-term changes in phytoplankton photosynthetic activity were studied during different periods of the years 2009 and 2010 in the coastal waters of a macrotidal ecosystem (the Strait of Dover, eastern English Channel). During each sampling period, samples were taken every 1.45 h., from sunrise to sunset, during at least 5 days distributed along a complete spring–neap tide cycle. The photosynthetic parameters were obtained by measuring rapid light curves using pulse amplitude modulated fluorometry and were related to environmental conditions and phytoplankton taxonomic composition. The maximum quantum yield (F _v/F _m) showed clear light-dependent changes and could vary from physiological maxima (0.68–0.60) to values close to 0.30 during the course of 1 day, suggesting the operation of photoprotective mechanisms. The maximum electron transport rate (ETR_m) and maximal light utilization efficiency (α) were generally positively correlated and showed large diel variability. These parameters fluctuated significantly from hour to hour within each day and the intraday pattern of variation changed significantly among days of each sampling period. Stepwise multiple linear regressions analyses indicated that light fluctuations explained a part of this variability but a great part of variability stayed unexplained. F _v/F _m, ETR_m and α were not only dependent on the light conditions of the sampling day but also on those of the previous days. A time lag of 3 days in the effect of light on ETR_m and α variation was highlighted. At these time scales, changes in phytoplankton community structure seemed to have a low importance in the variability in photosynthetic parameters. The photoacclimation index E _k showed a lower variability and was generally different from the incident irradiance, indicating a limited acclimation capacity with a poor optimization of light harvesting during the day. However, in well-mixed systems such as the Strait of Dover, the short-term photoacclimation is disrupted by the high level of variability in environmental conditions. Also, the variability observed in the present study can be associated with a particular kind of photosynthetic response: the “E _k-independent” variability. The physiological basis of this photosynthetic response is largely unresolved and further researches on this subject are still required to better explain the dynamics of phytoplankton activity in the Strait of Dover.     

A general kinetic law for heavy metal vaporization during municipal solid waste incineration

Metal emissions from waste incineration plants become a great environmental concern because of their toxicity for both human health and environment. Metals are not destroyed by high-temperature thermal treatment and some vaporized metals may be emitted. It is thus essential to understand the release mechanism of metals during high-temperature waste treatment, in order to improve the understanding of their behavior and the control of their emission. The objective of this study is to identify the kinetic law for metal release from realistic artificial waste. The vaporization of three metals of most concern (Cd, Pb and Zn) during municipal waste incineration was studied. The vaporization rate at the particle level was determined from the experimental concentration profile in the outlet gas of a fluidized bed reactor, by using the inverse method that was previously developed and validated by our team. As a first step, the kinetic parameters were determined thanks to experiments carried out at several temperatures. Specific laws, for each studied metal, were thus obtained as a function of temperature. Nevertheless, it is very useful to identify all the experimental kinetic curves (all studied metals at all temperatures) to one single mathematical law. Therefore, a general kinetic law, expressing the solid matrix influence on the metal vaporization dynamic, was determined as a second step. It permits to predict the vaporization characteristic time and the time course of the metal concentration in the waste.     

Does the queen win it all? Queen–worker conflict over male production in the bumblebee,<Emphasis Type="Italic"> Bombus terrestris</Emphasis>

Social insects provide a useful model for studying the evolutionary balance between cooperation and conflict linked to genetic structure. We investigated the outcome of this conflict in the bumblebee, Bombus terrestris, whose annual colony life cycle is characterized by overt competition over male production. We established artificial colonies composed of a queen and unrelated workers by daily exchange of callow workers between colony pairs of distinct genetic make-up. Using microsatellite analysis, this procedure allowed an exact calculation of the proportion of worker-derived males. The development and social behavior of these artificial colonies were similar to those of normal colonies. Despite a high worker reproduction attempt (63.8% of workers had developed ovaries and 38.4% were egg-layers), we found that on average 95% of the males produced during the competition phase (CPh) were queen-derived. However, in four colonies, queen death resulted in a considerable amount of worker-derived male production. The different putative ultimate causes of this efficient control by the queen are discussed, and we suggest a possible scenario of an evolutionary arms race that may occur between these two female castes.     

Prenatal diagnosis of PIBIDS

In a well-documented PIBIDS family, two investigations of DNA excision repair showed a severe defect in lymphocytes from the index case (residual repair activities were 10.6–12.1 per cent). The values for the mother, father, and sister were within the normal range when compared with a healthy control. In the pregnant mother, a prenatal diagnosis of PIBIDS was made by measuring UV-induced unscheduled DNA synthesis in cultivated amniotic fluid cells. Results ranged between 12.5 and 26.1 per cent depending on the UV doses applied and were consistent with an affected fetus. The parents opted for a termination of pregnancy. Following a therapeutic abortion, fetal skin fibroblasts were tested and showed a severe DNA excision-repair defect of 9.2–13.5 per cent of residual activity.