Waste management strategies for concrete

Recycling and reuse of waste such as building rubble, concrete lumps, etc. generated at construction and demolition sites form part of a wider, complex issue, primarily relating to improving supplies of construction material and solving problems of disposal of waste construction material. Within the framework of the sustainable development of the environment, the use of waste materials with minimum environmental impact has received much attention. The conversion of a large amount of demolished waste into an alternative resource will conserve the depleting natural resources of building materials. Demolished waste is mainly used as a non-stabilized base or sub-base in highway construction. The present paper discusses the recycling process and makes an effort to assess a safe and economic use of recycled concrete as a structural grade material for the construction industry. Extensive tests of structural properties such as compressive strength, flexural strength and split tensile strength of recycled concrete were carried out, in which cement and similarly fine aggregate were partially replaced by demolished waste to obtain recycled concrete and recycled aggregate concrete whose properties were compared with results for the conventional concrete.     

Wind speed pattern data and wind energy potential in Pakistan: current status,challenging platforms and innovative prospects

Environmental Science and Pollution Research - Energy is an essential parameter for the economic growth and sustainable development of any country. Due to the rapid increase in energy demand,...     

Cytochrome P450 system as potential biomarkers of certain toxicants: comparison between plant and animal models

In present study, we measured the activities of some selected cytochrome P450 isozymes like ethoxyresorufin-o-deethylase (EROD), pentoxyresorufin-o-deethylase (PROD), and N-nitrosodimethylamine demethylase (NDMA-d) treating experimental rats with different environmental toxicants, namely trichloroethylene (TCE), heavy metal mixture, and ethyl alcohol individually or in combination and by exposing the Allium cepa bulbs to increasing concentration of TCE for 48 h. In animal system, NDMA-d activity displayed a remarkable amplification by 4.2-fold in the liver of alcohol ingested rats compared with control animals. TCE intake also resulted in a marked increase of around 3.8-fold and 1.2-fold in rats’ NDMA-d activity in the liver and kidney, respectively. In onion bulbs, an amazing rise in the activity of test enzymes was recorded in a dose-dependent manner. Among the said enzymes, PROD showed maximum increase up to the extent of 22-fold in comparison with control at 20 ppm of TCE exposure, whereas NDMA-d and EROD showed 11- and 9-fold increase in enzymatic activity, respectively, compared with the control. Based on this study, we conclude and advocate that all the selected isozymes of CYP450 system, viz. PROD, NDMA-d, and EROD can act as potent biomarkers in plant system for assessing the TCE pollution.     

Toxicological effects of major environmental pollutants: an overview

The last quarter of the twentieth century had witnessed a global surge in awakening against the unabated menace of environmental pollution. Among the various types of environmental pollution, water pollution is an age-old problem but it has gained an alarming dimension lately because of the problems of population increase, sewage disposal, industrial waste, radioactive waste, etc. Present scenario of water pollution calls for immediate attention towards the remediation and detoxification of these hazardous agents in order to have a healthy living environment. The present communication will deal with the toxicological effects of major environmental pollutants, viz. heavy metals, pesticides, and phenols.     

Seasonal Variation in Bacterial Flora of the Wastewater and Soil in the Vicinity of Industrial Area

Environmental pollution is one of the major problems being facedtoday due to the advent of extensive industrialization. Heavy metals are the most important contaminants in wastewater that are present in abundance and are toxic. Heavy metal contentsof sewage in the industrial estate of Aligarh (U.P.) have beendetermined by atomic absorption spectrophotometry. The analysisof samples collected from six different locations revealedsignificantly high levels of Fe, Zn, Cu, Cr and Ni. Certainbacteriological (Total bacterial count, Total coliform, Fecal coliform, and Fecal Streptococci) parameters of domestic and industrial sewage as well as soils were monitored from March1990 to January 1993. Total bacterial count, total coliform,fecal coliform and fecal streptococci were found to be lowestin all the samples of industrial wastewater compared to thosein domestic sewage and soil systems. The soil however, contained highest total culturable bacterial population. In view of the common practice of the application of sewage to agricultural land in the neighbouring area, the discharge ofindustrial wastewater without proper treatment into public sewers should be strictly prohibited.     

Biomechanical pulping: a mill-scale evaluation

Mechanical pulping process is electrical energy intensive and results in low paper strength. Biomechanical pulping, defined as the fungal treatment of lignocellulosic materials prior to mechanical pulping, has shown at least 30% savings in electrical energy consumption, and significant improvements in paper strength properties compared to the control at a laboratory scale. In an effort to scale-up biomechanical pulping to an industrial level, 50 tons of spruce wood chips were inoculated with the best biopulping fungus in a continuous operation and stored in the form of an outdoor chip pile for 2 weeks. The pile was ventilated with conditioned air to maintain the optimum growth temperature and moisture throughout the pile. The control and fungus-treated chips were refined through a thermomechanical pulp mill (TMP) producing lightweight coated paper. The fungal pretreatment saved 33% electrical energy and improved paper strength properties significantly compared to the control. Since biofibers were stronger than the conventional TMP fibers, we were able to reduce the amount of bleached softwood kraft pulp by at least 5% in the final product. Fungal pretreatment reduced brightness, but brightness was restored to the level of bleached control with 60% more hydrogen peroxide. The economics of biomechanical pulping look attractive.     

Metabolic and endocrine effects of bisphenol A exposure in market seller women with polycystic ovary syndrome

Bisphenol A (BPA) is one of the synthetic monomer which can be found in the environment. Limited animal and human studies have demonstrated that BPA alters endocrine and or metabolic functions. The aims of the present study were to evaluate serum BPA level in marketing seller women with polycystic ovary syndrome (PCOS) and hormonal and metabolic effects of this exposure compared to a control paired group. In a case-control study, 62 PCOS women who work as marketing sellers and 62 healthy women with similar jobs were included. The two groups were body mass index (BMI)- and age-matched. Serum samples were analyzed for BPA content, fasting blood sugar (FBS), triglyceride, cholesterol, HDL and LDL levels, thyroid stimulating hormone (TSH) concentration, and LH:FSH ratio. Significant higher serum BPA content (0.48 ± 0.08 vs. 0.16 ± 0.04 ng/ml), triglyceride (103.05 ± 13.10 vs. 91.65 ± 12.52 mg/dl), cholesterol (165.05 ± 10.79 vs. 161.21 ± 10.31 mg/dl) levels and LH:FSH ratio (3.64 ± 0.86 vs. 0.62 ± 0.14) and significant lower TSH concentration (1.56 ± 0.68 vs. 2.15 ± 1.09 IU/ml) were detected in case against control group, respectively (P < 0.05). No significant differences were detected in FBS, LDL, and HDL levels between the two groups. Also, there were no significant associations between serum TSH concentration and BPA level neither in case (P = 0.269) nor in control (P = 0.532) groups. In BPA-exposed PCOS women, BPA level was higher than healthy women and this difference maybe the cause of significant differences in levels of triglyceride, cholesterol, TSH, and LH:FSH ratio. These observations confirm the potential role of BPA in PCOS pathophysiology.     

Biochemical,hematological, and pathological related healing effects of Elaeagnus angustifolia hydroalcoholic extract in 5-fluorouracil-induced oral mucositis in male golden hamster

Oral mucositis (OM) is one of the cancer chemotherapy-related side effects which can affect the quality of life of affected patients. This study was designed to investigate the healing effect of Elaeagnus angustifolia in 5-flurouracil (5-FU)-induced OM in golden hamster. Fifty-six adult male golden hamsters received three intraperitoneal injections of 5-FU at a dose of 60 mg/kg on days 0, 5, and 10. The cheek pouch mucosa was scratched superficially under local anesthesia. Then, two horizontal scratches were made across the everted cheek pouch on days 3 and 4. All treatments were started on day 12 for equal number of animals in control group with no treatments, gel base group that was treated with carboxy methyl cellulose as gel base which used in preparation of the topical gel, topical gel group that used gel containing 10% hydroalcoholic extract of E. angustifolia (HEEA) topically, and dietary group which was treated with 300 mg/kg HEEA. At 2 and 5 days after treatment, blood and pouch tissue sampling were done and analyzed for blood composition, tissue malondialdehyde (MDA) level, and myeloperoxidase (MPO) and superoxide dismutase (SOD) activities plus histopathological evaluations. Both topically and orally HEEA-treated groups showed a significant relief in OM compared to the control and base gel groups. However, the systemic form had higher efficiency in some parts especially decreasing the MPO (0.27 ± 0.17 vs. 0.56 ± 0.17 IU/L) and increasing SOD (6.46 ± 0.15 vs. 5.36 ± 0.18 IU/L) activities in pouch tissue in comparison to topical form mostly at 5 days after treatment. It seems that hydroalcoholic extract of E. angustifolia can be used as an appropriate drug choice for the treatment of oral mucositis based on its healing stimulatory and anti-inflammatory properties.

     

Biology and management of two important <Emphasis Type="Italic">Conyza</Emphasis> weeds: a global review

Weed management is one of the prime concerns for sustainable crop production. Conyza bonariensis and Conyza canadensis are two of the most problematic, noxious, invasive and widespread weeds in modern-day agriculture. The biology, ecology and interference of C. bonariensis and C. canadensis have been reviewed here to highlight pragmatic management options. Both these species share a unique set of biological features, which enables them to invade and adapt a wide range of environmental conditions. Distinct reproductive biology and an efficient seed dispersal mechanism help these species to spread rapidly. Ability to interfere strongly and to host crop pests makes these two species worst weeds of cropping systems. These weed species cause 28–68 % yield loss in important field crops such as soybean and cotton every year. These weeds are more prevalent in no-till systems and, thus, becoming a major issue in conservation agriculture. Cultural practices such as crop rotations, seed rate manipulation, mulching, inter-row tillage and narrow row spacing may provide an effective control of these species. However, such methods are not feasible and applicable under all types of conditions. Different herbicides also provide a varying degree of control depending on crop, agronomic practices, herbicide dose, application time and season. However, both these species have evolved resistance against multiple herbicides, including glyphosate and paraquat. The use of alternative herbicides and integrated management strategies may provide better control of herbicide-resistant C. bonariensis and C. canadensis. Management plans based on the eco-biological interactions of these species may prove sustainable in the future.     

STREAMFLOW MODELING OF UPPER INDUS RIVER CATCHMENTS1

ABSTRACT: The streamflows of three tributaries, Siran, Haro, and Soan in the upper Indus River catchment in Pakistan were simulated using SSARR and Tank Models. Channel characteristics of the main Indus River were also determined using the two models. The basin characteristics were derived by trial and error method and were verified using the data for the period 1964–1970. Comparison of the two model performances showed that low flows were better reproduced by SSARR while the high flows were simulated with equal accuracy by both the models.