A pilot scale anoxic/oxic membrane bioreactor (A/O MBR) for woolen mill dyeing wastewater treatment

A pilot-scale( 10 m^3/d) anoxic/oxic membrane bioreactor( A/O MBR) was tested for dyeing wastewater treatment of woolen mill without wasting sludge in 125 days operation. Results showed that the effluent quality was excellent, i.e. effluent COD less than 25 mg/L,BOD5 under 5 mg/L, turbidity lower than 0.65 NTU, and colour less than 30 DT, and met with the reuse water standard of China. The removal rates of COD, BOD5, colour, and turbidity were 92.4%, 98.4%, 74% and 98.9%, respectively. Constant-flux operation mode was carried out in this study, and backwash was effective for reducing membrane fouling and maintaining constant flux. Membrane fouling had heavy impact on energy consumption. More attention should be paid on pipe selection and design for the sidestream MBR system, too.     

基于机器学习的电热防除冰表面温度变化趋势预测

针对飞机部件周期控制律电加热防除冰的应用,提出基于机器学习以预测电加热防除冰表面温度的变化趋势.依靠大型结冰风洞及其电加热防除冰控制系统完成防除冰试验,获得有效的试验数据,以通、断电周期为分割单元,将试验数据划分成验证集和训练集.根据电热防除冰过程的换热情况,构建样本的特征参数,利用机器学习的有监督学习方式,选择KNN近邻回归算法和局部线性加权回归算法预测温度变化率,再转换为温度,得到的温度变化与测量数据的线性相关性达到80％以上的高相似度结果,表明使用机器学习可快速预测电热防除冰部件的表面温度变化趋势,且不同的回归算法针对模型不同测温点位置的预测效果存在差异.     

气单胞菌SH10吸附银离子机制的研究

以气单胞菌SH10为生物吸附材料,从静电吸附作用、离子交换作用、络合作用、沉淀作用几方面研究了SH10吸附Ag 过程可能存在的作用机制.结果表明,气单胞菌SH10吸附银离子依赖于静电吸附作用;吸附Ag 前后溶液中Na 、K 、Mg2 浓度的变化较小,说明吸附过程中离子交换不明显;SH10表面的羧基、氨基和脂类基团经化学屏蔽后,对Ag 的吸附量明显下降,结合红外光谱分析结果,确定酰胺基CO-NH为SH10与银离子发生络合作用的主要官能团;电镜扫描结果表明,SH10在吸附过程中可以和Ag 形成沉淀沉积在细胞表面.     

PH玻璃电极对比观测及误差研究

经过对PH玻璃电极对比观测实验，总结其在日常观测中衰减变化规律，以及PH电极失效前所具有的特征；讨论了对现有PH观测数据进行修正的方法，并编著相关修正程序；分析日常存在的测量误差，提出提高观测精度的措施。     

乌鲁木齐市环境空气中TSP和PM10来源解析

2002年,在乌鲁木齐市5个采样点分别采集了环境空气中的总悬浮颗粒物(TSP)和可吸入颗粒物(PM10).用化学质量平衡 (CMB)受体模型和二重源解析技术解析了TSP和PM10的来源,结果表明,各主要源类对TSP的分担率依次为扬尘34%、燃煤尘26%、建筑水泥尘10%、硫酸盐8%、土壤风沙尘7%、机动车尾气尘6%、钢铁尘2%、硝酸盐1%、其它6%;对PM10的分担率依次为扬尘30%、燃煤尘28%、建筑水泥尘11%、硫酸盐10%、机动车尾气尘8%、土壤风沙尘8%、硝酸盐1%、其它3%.     

Dissipation of epoxiconazole in the paddy field under subtropical conditions of Taiwan

The environmental fate and distribution of fungicide epoxiconazole were studied by a rice paddy field model ecosystem. One week before the head-sprouting stage, rice plant was treated separately once with OPUS (tradename of epoxiconazole) 12% SC 2.1 kg ha(-1) and 1.4 kg ha(-1), respectively. Soil, water and rice plant were sampled seven days intervals nine times after application. The bioconcentration factor of epoxiconazole on mosquito fish in the ecosystem was also determined, based on the amounts of epoxiconazole content both in fish and water. This was initiated one day after the fungicide treatment, and continued for four days. In addition, the residue of epoxiconazole in rice grains was analyzed after harvest. After harvest, both planted water spinach (Ipomoea aquatica Forsk) and edible amaranth (Amaranthus mangostanüs L.) were analyzed. The results showed that epoxiconazole degraded in the local environment under the experimental conditions described. The degradation equations were in accordance with the first order kinetics. The DT50 of soil, field water and rice plant were 20-69 days, 11-20 days and 14-39 days, respectively. The bioconcentration factors of epoxiconazole on mosquito fish were 12.9 and 10.6 from 2.1 kg ha(-1) and 1.4 kg ha(-1) treatment, respectively. Residues of epoxiconazole in both rice and harvest vegetables were non-detectable. This indicates that epoxiconazole applied to rice at the recommended rates and application frequencies will not accumulate on rice grain and successive cropping vegetables.     

Quick determination of malodor-causing fatty acids in manure by capillary electrophoresis

The analysis of odor components in livestock waste has been extensively studied. Past research has identified volatile fatty acids, especially from C3 to C6, as indicators of malodor. Originally, the odorous components were analyzed by gas chromatography after a tedious absorption and troublesome extraction procedure or by a subjectively olfactory system or sense of smell. Thus, there is a need for the development of highly specific, quantitative analytical methods. In this research, a comprehensive liquid manure analysis approach-capillary electrophoresis (CE) with a systematic optimization procedure-was adopted to measure the concentration of propanoic acid (C2H5COOH, C3), butyric acid (C3H7COOH, C4), valeric acid (C4H9COOH, C5) and caproic acid (C5H11COOH, C6) in swine manure. Liquid samples after filtration were injected into CE directly. The following condition is finally proposed: fused-silica capillary, effective length 40 cm, 50 microm I.D.; buffer, 20 mM Tris and 10 mM p-anisate, pH 8.0; voltage 30 kV; temperature 25 degrees C. The results showed that CE provided a quantitative analysis of volatile fatty acids in liquid manure at the ppm level with minimum sample needed (nanoliter). Moreover, the use of CE is a timesaving technique; one measurement for the separation of those VFAs could be completed within 10 min.     

Characterization of metal adsorption kinetic properties in batch and fixed-bed reactors

Copper adsorption kinetic properties in batch and fixed-bed reactors were studied in this paper. The isothermal adsorption experiments showed that the copper adsorption capacity of a granular activated carbon (Filtrasorb 200) increased when ionic strength was higher. The presence of EDTA diminished the adsorption. An intraparticle diffusion model and a fixed-bed model were successfully used to describe the batch kinetic and fixed-bed operation behaviors. The kinetics became faster when the solution pH was not controlled, implying that the surface precipitation caused some metal uptake. The external mass transfer coefficient, the diffusivity and the dispersion coefficient were obtained from the modeling. It was found that both external mass transfer and dispersion coefficients increased when the flow rate was higher. Finally effects of kinetic parameters on simulation of fixed-bed operation were conducted.     

Removal of BTEX vapor from waste gases by a trickle bed biofilter

The system performance of a trickle bed biofilter for treating single and mixed benzene, toluene, ethylbenzene, and o-xylene (BTEX) vapors from waste gases was investigated under different gas flow rates and influent BTEX concentrations. When a single substrate was fed, removal efficiencies of greater than 90% could be achieved for the loads below 64 g benzene/m3/hr, 110 g toluene/m3/hr, 53 g ethylbenzene/m3/hr, and 55 g o-xylene/m3/hr. When a mixed substrate was fed, removal efficiencies of each compound could be above 90% at BTEX loads below 96 g/m3/hr. The trickle bed biofilter appears to be an effective treatment process for removing both single and mixed BTEX vapors with low to high loads. Under similar substrate loads, BTEX vapors were preferentially biodegraded in the order of toluene, benzene, o-xylene, and ethylbenzene. The volumetric removal rates (elimination capacities) of BTEX vapors for a single-substrate feed were higher than those for a mixed-substrate feed under similar substrate loads; these differences were enhanced at higher substrate loads and less significant for a preferred substrate.     

Alcaligenes sp.YF11菌对杀灭菊酯的降解机理

测定了降解菌Alcaligenessp.YF11对不同浓度杀灭菊酯的降解及其降解途径。在纯培养系统中,Alcaligenessp.YF11对100mg／L的杀灭菊酯的降解符合零级动力学特征,其降解速率为2．1mg／L·h;50mg／L的杀灭菊酯在24h的降解率为87.5％;10mg／L的杀灭菊酯10h的降解率为71．0％。Alcaligenesso．YF11对杀灭菊酯的降解为矿化作用。