Remediation procedure used for contaminated soil and underground water: A case study from the chemical industry

This is a case study of contamination by a non-aqueous phase liquid (NAPL) that leaked from a chemical plant. The remediation procedure adopted for the initial phase of the plume migration was a plastic diaphragm wall coupled with a series of water extraction wells designed to avoid environmental impact on the surrounding ecosystems. Monitoring has shown that the containment is successful, and additional measures that contribute to accelerating remediation have been adopted. The authors wished to investigate how remediation might be further enhanced. The use of in situ aeration coupled with a system of soil vapor extraction (AS/SVE) has been chosen, since the remediation of sites with characteristics similar to those in this study, if based exclusively on dissolved-phase control, would take several decades to be completed. The transport of contaminant plumes has been simulated by using an analytical model to evaluate the effectiveness of the natural attenuation of the contaminant. The results of the simulation have confirmed the limited effectiveness of the natural attenuation of the contaminant, as well as the effective increase of remediation that would occur if the AS/SVE system is applied. A sensitivity analysis that included several combinations of increments of parameters that correspond to the decay rate of the source and the dissolved plume has simulated what might happen if the AS/SVE system is implemented.     

Renewable energies in electricity generation for reduction of greenhouse gases in Mexico 2025

This study presents 4 scenarios relating to the environmental futures of electricity generation in Mexico up to the year 2025. The first scenario emphasizes the use of oil products, particularly fuel oil, and represents the historic path of Mexico's energy policy. The second scenario prioritizes the use of natural gas, reflecting the energy consumption pattern that arose in the mid-1990s as a result of reforms in the energy sector. In the third scenario, the high participation of renewable sources of energy is considered feasible from a technical and economic point of view. The fourth scenario takes into account the present- and medium-term use of natural-gas technologies that the energy reform has produced, but after 2007 a high and feasible participation of renewable sources of energy is considered. The 4 scenarios are evaluated up to the year 2025 in terms of greenhouse gases (GHG) and acid rain precursor gases (ARPG).     

ARCGIS‐SWAT: A GEODATA MODEL AND GIS INTERFACE FOR SWAT1

This paper presents ArcGIS‐SWAT, a geodata model and geographic information system (GIS) interface for the Soil and Water Assessment Tool (SWAT). The ArcGIS‐SWAT data model is a system of geodatabases that store SWAT geographic, numeric, and text input data and results in an organized fashion. Thus, it is proposed that a single and comprehensive geodatabase be used as the repository of a SWAT simulation. The ArcGIS‐SWAT interface uses programming objects that conform to the Component Object Model (COM) design standard, which facilitate the use of functionality of other Windows‐based applications within ArcGIS‐SWAT. In particular, the use of MS Excel and MATLAB functionality for data analysis and visualization of results is demonstrated. Likewise, it is proposed to conduct hydrologic model integration through the sharing of information with a not‐model‐specific hub data model where information common to different models can be stored and from which it can be retrieved. As an example, it is demonstrated how the Hydrologic Modeling System (HMS) ‐ a computer application for flood analysis ‐ can use information originally developed by ArcGIS‐SWAT for SWAT. The application of ArcGIS‐SWAT to the Seco Creek watershed in Texas is presented.     

Deposition and Storage of Spheroidal Carbonaceous Fly-Ash Particles in European Mountain Lake Sediments and Catchment Soils

Spheroidal carbonaceous particles(SCPs) are produced only from high temperaturecombustion of fossil-fuels. In mountain lakesystems, they provide an unambiguous indicator ofatmospheric deposition. In order to comparedepositional fluxes of SCPs between mountainareas experiencing various pollutant regimes,intensive bulk deposition sampling was undertakenat five sites across Europe. Catchment soil coresand lake sediment cores were also taken at eachsite to compare SCP storage over the post-industrial period. Atmospheric, sediment and soilSCP data showed similar patterns. Highestcontamination was found in Scotland, Slovakia andSpain with the Austrian site intermediate and themid-Norwegian site least contaminated. A highproportion of accumulated SCPs were found to bestored in catchment soils at each site.Therefore, a significant increase in soilerosion, possibly as a result of future climatechange, could lead to the input of largequantities of catchment stored SCPs and, byimplication, other atmospherically depositedcontaminants to the lake ecosystem.     

CFD Prediction of Air Quality in the Area between Two City Vehicular Tunnels Considering Moving Cars

Concentration fields of different pollutants that spread outside two roadtunnels predicted with a CFD code will be presented. The solution domain represents the city area located between two tunnel outlets – tunnel Strahov and tunnel Mrazovka in Prague. The vicinity of both tunnels is a heavily built up area with tall buildings forming typical street canyons. The CFD modelling predicts the situation after the tunnel Mrazovka will be finished and traffic will increase considerably between both tunnels. Namely, an interest was given to the prediction of dispersion of emissions leaving both tunnel and the area touched by the traffic. For the CFD predictions, a method previously developed for moving vehicles was used. The method uses combination of Eulerian and Lagrangian approaches to moving objects and is capable of modeling different speeds and traffic rates of cars as well as traffic-induced turbulence. Influence of several meteorological parameters was studied, namely wind speed and direction and traffic parameters, like traffic rates and speed of cars. The method separates contributions from different sources to the total concentration field, namely from background, tunnel outlet and roadway. Results are presented in the form of horizontal and vertical concentration fields of NO_x.     

Interpretation of analytical data on n-alkanes and polynuclear aromatic hydrocarbons in Arbacia lixula from the coasts of Tenerife (Canary Islands, Spain) by multivariate data analysis

The hydrocarbons contents (n-alkanes, polycyclic aromatic hydrocarbons) were determined in the sea urchin Arbacia lixula. Multivariate data analysis as principal component analysis, factor analysis and, cluster analysis were applied to elucidate sources of pollution. PCA and FA were performed to establish the relationships between variables (hydrocarbons), samples (sea urchin) and sources of pollution.     

Interpretation of heavy metal data from mussel by use of multivariate classification techniques

Different strategies of multivariate analysis of metals concentrations (Mn, Fe, Ni, V, Co, Cu, Cd, Hg, Pb, Na, K) in mussel samples from different spanish markets are used to interpret a data base and identify differences between species and origin of the samples. Principal Component Analysis and Potential curves are applied to properly classify unknown samples from representative mussels samples (Mytilus edulis and Perna canaliculus). Also, Principal Components Analysis is used as display method to visualize the relation between the variables and objects of interest.     

Anaerobic Biodegradation of Blends Based on Polyvinyl Alcohol

The presented work deals with blends composed of polyvinyl alcohol (PVA) and biopolymers (protein hydrolysate, starch, lignin). PVA does not belong to biologically inert plastics but its degradation rate (particularly under anaerobic conditions) is low. A potential solution to the issue problem lies in preparation of blends with readily degradable substrates. We studied degradation of blow-molded films made of commercial PVA and mentioned biopolymers in an aqueous anaerobic environment employing inoculation with digested activated sludge from the municipal wastewater treatment plant. Films prepared in the first experimental series were to be used for comparing biodegradation of blends modified with native or plasticized starch; in this case effect of plasticization was not proved. The degree of PVA degradation after modification with native or plasticized starch increases in a striking and practically same manner already at a starch level as low as approximately 5 wt.%. Films of the second experimental series were prepared as additionally modified with protein hydrolysate and lignin. Only lignin-modified samples exhibited a somewhat lower degree of biodegradation but regarding the measure of lignin present in blend this circumstance is not essential. Level of biodegradation with all discussed films differed only slightly—within range of experimental error.     

Differences in the effects of simulated sea aerosol on water relations, salt content, and leaf ultrastructure of rock-rose plants

White-leaf rock-rose (Cistus albidus L.) and Montpellier rock-rose (C. monspeliensis L.) plants were sprayed 2 to 3 min per day over a 7-d period, in an unheated plastic greenhouse, with different aqueous solutions containing deionized water alone (control); an anionic surfactant (sodium dodecylbenzenesulfonate 82.5%, 50 mg L(-1)) (S1); a solution simulating the composition of sea aerosol (S2); and a solution simulating sea aerosol with anionic surfactant (S3). White-leaf rock-rose was more sensitive to sea aerosol, showing greater leaf damage and markedly decreased growth, and the presence of surfactant enhanced the phytotoxic effect leading to greater increases in mortality. Montpellier rock-rose did not appear to be more adversely affected when surfactant was used in combination with sea aerosol, and manifested slight or less severe symptoms than white-leaf rock-rose. There was a significant increase in leaf turgor potential in the plants treated with both sea aerosol treatments by osmotic adjustment effect. The decrease in photosynthesis level seems to be due to both stomatal and nonstomatal factors. The results of microscopical analysis of Montpellier rock-rose plants show that sea aerosol treatment caused alterations in the chloroplast structure, reducing the starch grain and swelling the thylakoid membranes. The results of this study indicated that Montpellier rock-rose was more tolerant to sea aerosol than white-leaf rock-rose, showing a lower reduction in plant growth and less leaf damage, probably because of its ability to compartmentalize the toxic ions at the intracellular level.     

Chromium (III) recovery from waste acid solution by ion exchange processing using Amberlite IR-120 resin: batch and continuous ion exchange modelling

The use of ion exchange technology was studied to remove chromium (III) from acidic waste solution by Amberlite IR-120 resin. Batch and column experimental tests were conducted to provide data for theoretical models and verify the system performance of the adsorption process. Results of batch equilibrium tests indicated that Langmuir isotherm describes well the adsorption process, whereas experimental data also provide evidence that, under the present experimental conditions, chromium (III) adsorption by Amberlite IR-120 resin is film-diffusion controlled; on the other hand, the theoretical model used in the present investigation was found to predict reasonably well the ion exchange breakthrough performance.