Chemical mass balance source apportionment for combined PM2.5 measurements from U.S. non-urban and urban long-term networks

The Minnesota Particulate Matter 2.5 (PM_2.5) Source Apportionment Study was undertaken to explore the utility of PM_2.5 mass, element, ion, and carbon measurements from long-term speciation networks for pollution source attribution. Ambient monitoring data at eight sites across the state were retrieved from the archives of the Interagency Monitoring of Protected Visual Environments (IMPROVE) and the Speciation Trends Network (STN; part of the Chemical Speciation Network [CSN]) and analyzed by an Effective Variance – Chemical Mass Balance (EV-CMB) receptor model with region-specific geological source profiles developed in this study. PM_2.5 was apportioned into contributions of fugitive soil dust, calcium-rich dust, taconite (low grade iron ore) dust, road salt, motor vehicle exhaust, biomass burning, coal-fired utility, and secondary aerosol. Secondary sulfate and nitrate contributed strongly (49–71% of PM_2.5) across all sites and was dominant (≥60%) at IMPROVE sites. Vehicle exhausts accounted for 20–70% of the primary PM_2.5 contribution, largely exceeding the proportion in the primary PM_2.5 emission inventory. The diesel exhaust contribution was separable from the gasoline engine exhaust contribution at the STN sites. Higher detection limits for several marker elements in the STN resulted in non-detectable coal-fired boiler contributions which were detected in the IMPROVE data. Despite the different measured variables, analytical methods, and detection limits, EV-CMB results from a nearby IMPROVE-STN non-urban/urban sites showed similar contributions from regional sources – including fugitive dust and secondary aerosol. Seasonal variations of source contributions were examined and extreme PM_2.5 episodes were explained by both local and regional pollution events.     

Transport of Escherichia coli in 25 m quartz sand columns

To help improve the prediction of bacteria travel distances in aquifers laboratory experiments were conducted to measure the distant dependent sticking efficiencies of two low attaching Escherichia coli strains (UCFL-94 and UCFL-131). The experimental set up consisted of a 25 m long helical column with a diameter of 3.2 cm packed with 99.1% pure-quartz sand saturated with a solution of magnesium sulfate and calcium chloride. Bacteria mass breakthrough at sampling distances ranging from 6 to 25.65 m were observed to quantify bacteria attachment over total transport distances (α(L)) and sticking efficiencies at large intra-column segments (α(i)) (>5m). Fractions of cells retained (F(i)) in a column segment as a function of α(i) were fitted with a power-law distribution from which the minimum sticking efficiency defined as the sticking efficiency of 0.001% bacteria fraction of the total input mass retained that results in a 5 log removal were extrapolated. Low values of α(L) in the order 10(-4) and 10(-3) were obtained for UCFL-94 and UCFL-131 respectively, while α(i)-values ranged between 10(-6) to 10(-3) for UCFL-94 and 10(-5) to 10(-4) for UCFL-131. In addition, both α(L) and α(i) reduced with increasing transport distance, and high coefficients of determination (0.99) were obtained for power-law distributions ofα(i) for the two strains. Minimum sticking efficiencies extrapolated were 10(-7) and 10(-8) for UCFL-94 and UCFL-131, respectively. Fractions of cells exiting the column were 0.19 and 0.87 for UCFL-94 and UCL-131, respectively. We concluded that environmentally realistic sticking efficiency values in the order of 10(-4) and 10(-3) and much lower sticking efficiencies in the order 10(-5) are measurable in the laboratory, Also power-law distributions in sticking efficiencies commonly observed for limited intra-column distances (<2m) are applicable at large transport distances(>6m) in columns packed with quartz grains. High fractions of bacteria populations may possess the so-called minimum sticking efficiency, thus expressing their ability to be transported over distances longer than what might be predicted using measured sticking efficiencies from experiments with both short (<1m) and long columns (>25 m). Also variable values of sticking efficiencies within and among the strains show heterogeneities possibly due to variations in cell surface characteristics of the strains. The low sticking efficiency values measured express the importance of the long columns used in the experiments and the lower values of extrapolated minimum sticking efficiencies makes the method a valuable tool in delineating protection areas in real-world scenarios.     

Development of a combined isotopic and mass-balance approach to determine dissolved organic carbon sources in eutrophic reservoirs

A combined mass-balance and stable isotope approach was set up to identify and quantify dissolved organic carbon (DOC) sources in a DOC-rich (9 mg L⁻¹) eutrophic reservoir located in Western France and used for drinking water supply (so-called Rophemel reservoir). The mass-balance approach consisted in measuring the flux of allochthonous DOC on a daily basis, and in comparing it with the effective (measured) DOC concentration of the reservoir. The isotopic approach consisted, for its part, in measuring the carbon isotope ratios (δ¹³C values) of both allochthonous and autochthonous DOC sources, and comparing these values with the δ¹³C values of the reservoir DOC. Results from both approaches were consistent pointing out for a DOC of 100% allochthonous origin. In particular, the δ¹³C values of the DOC recovered in the reservoir (−28.5 ± 0.2‰; n = 22) during the algal bloom season (May-September) showed no trace of an autochthonous contribution (δ¹³C in algae = −30.1 ± 0.3‰; n = 2) being indistinguishable from the δ¹³C values of allochthonous DOC from inflowing rivers (−28.6 ± 0.1‰; n = 8). These results demonstrate that eutrophication is not responsible for the high DOC concentrations observed in the Rophemel reservoir and that limiting eutrophication of this reservoir will not reduce the potential formation of disinfection by-products during water treatment. The methodology developed in this study based on a complementary isotopic and mass-balance approach provides a powerful tool, suitable to identify and quantify DOC sources in eutrophic, DOC-contaminated reservoirs.     

Statistical modeling of crystalline silica exposure by trade in the construction industry using a database compiled from the literature

A quantitative determinants-of-exposure analysis of respirable crystalline silica (RCS) levels in the construction industry was performed using a database compiled from an extensive literature review. Statistical models were developed to predict work-shift exposure levels by trade. Monte Carlo simulation was used to recreate exposures derived from summarized measurements which were combined with single measurements for analysis. Modeling was performed using Tobit models within a multimodel inference framework, with year, sampling duration, type of environment, project purpose, project type, sampling strategy and use of exposure controls as potential predictors. 1346 RCS measurements were included in the analysis, of which 318 were non-detects and 228 were simulated from summary statistics. The model containing all the variables explained 22% of total variability. Apart from trade, sampling duration, year and strategy were the most influential predictors of RCS levels. The use of exposure controls was associated with an average decrease of 19% in exposure levels compared to none, and increased concentrations were found for industrial, demolition and renovation projects. Predicted geometric means for year 1999 were the highest for drilling rig operators (0.238 mg m(-3)) and tunnel construction workers (0.224 mg m(-3)), while the estimated exceedance fraction of the ACGIH TLV by trade ranged from 47% to 91%. The predicted geometric means in this study indicated important overexposure compared to the TLV. However, the low proportion of variability explained by the models suggests that the construction trade is only a moderate predictor of work-shift exposure levels. The impact of the different tasks performed during a work shift should also be assessed to provide better management and control of RCS exposure levels on construction sites.     

Partitioning of metals in a degraded acid sulfate soil landscape: influence of tidal re-inundation

The oxidation and acidification of sulfidic soil materials results in the re-partitioning of metals, generally to more mobile forms. In this study, we examine the partitioning of Fe, Cr, Cu, Mn, Ni and Zn in the acidified surface soil (0-0.1 m) and the unoxidised sub-soil materials (1.3-1.5 m) of an acid sulfate soil landscape. Metal partitioning at this acidic site was then compared to an adjacent site that was previously acidified, but has since been remediated by tidal re-inundation. Differences in metal partitioning were determined using an optimised six-step sequential extraction procedure which targets the “labile”, “acid-soluble”, “organic”, “crystalline oxide”, “pyritic” and “residual” fractions. The surficial soil materials of the acidic site had experienced considerable losses of Cr, Cu, Mn and Ni compared to the underlying parent material due to oxidation and acidification, yet only minor losses of Fe and Zn. In general, the metals most depleted from the acidified surface soil materials exhibited the greatest sequestration in the surface soil materials of the tidally remediated site. An exception to this was iron, which accumulated to highly elevated concentrations in the surficial soil materials of the tidally remediated site. The “acid-soluble”, “organic” and “pyritic” fractions displayed the greatest increase in metals following tidal remediation. This study demonstrates that prolonged tidal re-inundation of severely acidified acid sulfate soil landscapes leads to the immobilisation of trace metals through the surficial accumulation of iron oxides, organic material and pyrite.     

A comparative assessment of waste incinerators in the UK

The uptake in Europe of Energy from Waste (EfW) incinerator plants has increased rapidly in recent years. In the UK, 25 municipal waste incinerators with energy recovery are now in operation; however, their waste supply chains and business practices vary significantly. With over a hundred more plant developments being considered it is important to establish best business practices for ensuring efficient environmental and operational performance. By reviewing the 25 plants we identify four suitable case study plants to compare technologies (moving grate, fluidised bed and rotary kiln), plant economics and operations. Using data collected from annual reports and through interviews and site visits we provide recommendations for improving the supply chain for waste incinerators and highlight the current issues and challenges faced by the industry. We find that plants using moving grate have a high availability of 87–92%. However, compared to the fluidised bed and rotary kiln, quantities of bottom ash and emissions of hydrogen chloride and carbon monoxide are high. The uptake of integrated recycling practices, combined heat and power, and post incineration non-ferrous metal collections needs to be increased among EfW incinerators in the UK. We conclude that one of the major difficulties encountered by waste facilities is the appropriate selection of technology, capacity, site, waste suppliers and heat consumers. This study will be of particular value to EfW plant developers, government authorities and researchers working within the sector of waste management.     

Effect of americium-241 on luminous bacteria. Role of peroxides

The effect of americium-241 (²⁴¹Am), an alpha-emitting radionuclide of high specific activity, on luminous bacteria Photobacterium phosphoreum was studied. Traces of ²⁴¹Am in nutrient media (0.16-6.67 kBq/L) suppressed the growth of bacteria, but enhanced luminescence intensity and quantum yield at room temperature. Lower temperature (4 °C) increased the time of bacterial luminescence and revealed a stage of bioluminescence inhibition after 150 h of bioluminescence registration start. The role of conditions of exposure the bacterial cells to the ²⁴¹Am is discussed. The effect of ²⁴¹Am on luminous bacteria was attributed to peroxide compounds generated in water solutions as secondary products of radioactive decay. Increase of peroxide concentration in ²⁴¹Am solutions was demonstrated; and the similarity of ²⁴¹Am and hydrogen peroxide effects on bacterial luminescence was revealed. The study provides a scientific basis for elaboration of bioluminescence-based assay to monitor radiotoxicity of alpha-emitting radionuclides in aquatic solutions.     

Toxicity of zinc oxide nanoparticles in the earthworm, Eisenia fetida and subcellular fractionation of Zn

The extensive use of nanoparticles (NPs) in a variety of applications has raised great concerns about their environmental fate and biological effects. This study examined the impact of dissolved organic matter (DOM) and salts on ZnO NP dispersion/solubility and toxicity to the earthworm Eisenia fetida. To be able to better evaluate the toxicity of NPs, exposure in agar and on filter paper was proposed for enabling a comparison of the importance of different uptake routes. A dose-related increase in mortality was observed in earthworms exposed in agar with almost 100% mortality after 96 h exposure to the highest concentration (1000 mg ZnO/kg agar). Scanning electron microscopy (SEM) showed that the addition of salts enhanced the aggregation of ZnO NPs in agar and consequently affected the dissolution behavior and biological availability of the particles. On filter paper, mortality was the highest at the lowest exposure concentration (50 mg ZnO/L) and seemed to decrease with increasing exposure levels. TEM images of ZnO showed that the solubility and morphology of NPs were changed dramatically upon the addition of humic acids (HA). The subcellular distribution pattern of Zn in earthworms after 96 h exposure in agar and on filter paper showed that the Zn taken up via dietary ZnO particles (from agar) was mainly found in organelles and the cytosol while the Zn accumulated as soluble Zn from filter paper was mainly distributed in cell membranes and tissues. Antioxidant enzymatic activities (SOD, CAT, and GSH-px) were investigated in the worms surviving the toxicity tests. A slight increase of SOD activities was observed at the lowest exposure dose of ZnO (50mg/kg), followed by a decrease at 100mg/kg in the agar cubes. Activities of both CAT and GSH-Px enzymes were not significantly influenced in the worms exposed to agar, although a slight decrease at 500 and 1000 mg ZnO/kg agar was observed. A similar change trend of SOD activities was observed for the earthworms on filter paper, but a significant decrease began at a higher ZnO NP concentration of 500 mg ZnO/L. The use of soil extracts instead of deionized water (DW) to simulate a realistic exposure system significantly reduced the toxicity of the ZnO NPs on filter paper, which increases the predictive power of filter paper toxicity tests for the environmental risk assessment of NPs.