Effects of spatial variability and colony size on the reproductive output and gonadal development cycle of the Mediterranean red coral (Corallium rubrum L.)

Red coral (Corallium rubrum, L. 1758) is an over-exploited Mediterranean gorgonian. The gonadal development cycle of this gorgonian is examined at the Costa Brava (NW Mediterranean) taking into account for the first time colony size, depth and spatial horizontal variability. This study compares the gonad development and fertility in two colony size classes (colonies <6-cm height, and >10-cm height, both at 40–45-m depth), and two populations at different depths (16–18-m depth, and 40–45-m depth, both consisting of <6-cm high colonies) in a 15-month period. The fertility of seven size classes (<2 cm to >12 cm high colonies, in 2 cm intervals) was examined in the deep population, where large colonies were present. Furthermore, reproductive output was compared in 6 populations (distributed along more than 70-km coastline) one month before spawning (June). Red coral was found to be dioecious and gonochoric with a sex ratio of 1:1, which differs from other NW Mediterranean populations. On the other hand, fertility of different size classes indicates that small colonies of 2-cm height already produce gonads, which is in line with previous studies. Female and male polyp fertility and sperm sac size increase significantly with colony size [sperm sac diameter: 476±144 μm (mean±SD) and 305±150 μm in the >10-cm and <6-cm height colonies, respectively), whereas no significant effect on oocyte diameter was found (oocyte diameter: 373.7±18.7 μm). Depth staggered spawning, that is, an earlier release of gonads in the shallow populations, was observed in summer 2003, coinciding with the highest temperature gradient between shallow and deep water during the study period. Colonies of <6-cm height were significantly less fertile than colonies >12 cm, thus the recommendation of this study is that a minimum height should be incorporated into fishing regulations. The six studied populations at the Costa Brava showed a comparable reproductive potential, which demonstrates little variability within the homogenous population structure and range of size classes (due to overharvesting) found at the Costa Brava. The study of reproductive output is an important tool for ecosystem management, and this work recommends basing specific exploitation laws for distinctive populations on colony size, which is found to have a larger effect on reproductive potential than mesoscale variability. An erratum to this article can be found at     

Population structure of an exploited benthic cnidarian: the case study of red coral (Corallium rubrum L.)

Octocorals are an important part of many ecosystems as they add three-dimensional complexity to the benthos and thereby increase biodiversity. The Mediterranean red coral (Corallium rubrum, L. 1758) is a longevous octocoral that is harvested commercially, yet natural and anthropogenic influences on its population size structure are little understood. This study found that some harvested red coral populations had a significantly different size structure when compared to populations at the nearby Marine Protected Area (MPA) of Medas Islands at the Spanish Costa Brava (NW Mediterranean). Eighty-nine percent of the red corals in the harvested Costa Brava area are less than 10 years old and 96% of all colonies have not yet grown more than second-order branches. The size/age distribution of the harvested population is notably skewed towards younger and smaller colonies. Thus, although red coral is still abundant, its population structure is strongly distorted by harvesting. The results confirm that MPAs are useful to distinguish between anthropogenic and natural influences on population structure. However, 14 years of protection appears to be an insufficient recovery time for a longevous octocoral population such as red coral.     

Particulate matter emissions and gaseous air toxic pollutants from commercial meat cooking operations

This study assessed the effectiveness of three novel control technologies for particulate matter (PM) and volatile organic compound (VOC) removal from commercial meat cooking operations. All experiments were conducted using standardized procedures at University of California, Riverside''s commercial test cooking facility. PM mass emissions collected using South Coast Air Quality Management District (SCAQMD) Method 5.1, as well as a dilution tunnel-based PM method showed statistically significantly reductions for each control technology when compared to baseline testing (i.e., without a catalyst). Overall, particle number emissions decreased with the use of control technologies, with the exception of control technology 2 (CT2), which is a grease removal technology based on boundary layer momentum transfer (BLMT) theory. Particle size distributions were unimodal with CT2 resulting in higher particle number populations at lower particle diameters. Organic carbon was the dominant PM component (> 99%) for all experiments. Formaldehyde and acetaldehyde were the most abundant carbonyl compounds and showed reductions with the application of the control technologies. Some reductions in mono-aromatic VOCs were also observed with CT2 and the electrostatic precipitator (ESP) CT3 compared to the baseline testing.     

A quantitative method for accounting human opinion,preferences and perceptions in ecosystem management

Ecosystem management (EM) is a holistic approach, in which public participation in decision-making, and incorporation of human preferences, needs and perceptions in management plans is a main element. The decision-making from human opinion method (DeMHO), presented here, can be used in EM in selecting the more suitable and socially acceptable management plan, in order to protect or restore an ecosystem. The method focuses on the quantification of the human opinion, preferences and perceptions, which are investigated after research on the local population of the ecosystem. The results of this research are the inputs of the method; multi-criteria decision-making procedures, such as the analytic hierarchy process (AHP), the expected utility method (EUM) and compromise programming (CP) are used to assign the appropriate weights and rank according to their importance the interest groups, the issues to be studied, and the alternative management plans. The alternatives are also evaluated by assessing their sustainable character. The paper presents DeMHO and its application in the National Park of Eastern Macedonia and Thrace in Greece, after a research through a questionnaire on the local population.     

Screening life cycle assessment of an office used for academic purposes

The aim of this study is to contribute to the analysis of the environmental impacts deriving from common aspects of the service sector activity and to identify auxiliary actions and hot spots in order to improve the environmental performance of offices used for educational purposes. In that aspect, a screening life cycle assessment (LCA) for a university office-workstation of Democritus University of Thrace, Greece, was performed with the application of the SimaPro LCA software, and the Impact 2002+ method with fifteen impact categories for the interpretation of results. Findings from this research indicated that energy consumption for the powering electronic appliances was the key factor affecting most of the environmental impact categories examined. The impact categories most seriously affected by the office life cycle were the emissions of respiratory inorganics (39%), global warming (31%) and non-renewable energy use (27%). The saving of the energy consumed due to standby mode could lead to a reduction of 2.4% of the total energy consumption in the office in a yearly basis with proportional positive influence in all the respective impact categories. Additionally, utilization of solar energy through photovoltaic panels could lead to a reduction close to 90% for a number of impact categories. Therefore, actions and strategies for improving the environmental performance of academic offices should focus on the reduction of energy consumption.     

Determination of heavy metals in the territory of contaminated areas of Greece and their restoration through hyperaccumulators

Environmental Science and Pollution Research - Phytoremediation is an effective technique for the processing of contaminated soil and for sequestering environmental contaminants such as heavy...     

Fluopyram removal from agricultural equipment rinsing water using HSF pilot-scale constructed wetlands

Fluopyram is a novel broad-spectrum fungicide with nematocidal activity, and as an extensively used pesticide, it could cause toxicity in nontarget organisms. The aim of this study was to explore the efficiency of five horizontal subsurface flow (HSF) constructed wetlands (CWs) to remove fluopyram from rinsing water produced during the cleaning of pesticide spraying equipment. Four CWs, namely WG-R, WG-R-P, WG-C, and WG-U, contained fine gravel as porous media. WG-R and WG-R-P were planted with Phragmites australis, WG-C with Typha latifolia, and WG-U was left unplanted. Bioaugmentation with plant growth-promoting rhizobacteria was conducted in WG-R-P unit. The fifth unit (WGZ-R) planted with Phragmites australis and contained gravel and zeolite as porous media. All of CWs were loaded on a daily basis from December 2019 to January 2021 with water fortified with fluopyram. The removal rate follows the pattern of WG-R-P (70.67%) > WGZ-R (62.06%) > WG-C (59.98%) > WG-R (36.10%) > WG-U (25.09%). The most important parameters affecting the fluopyram removal were bioaugmentation, zeolite presence in porous media, and plant species. The WG-R-P unit showed higher fluopyram removal in comparison to the WG-R (increase about 96%), the zeolite increased the fluopyram removal by 72%, and the WG-C unit showed 66% higher fluopyram removal than the WG-R unit.

     

Raw and fungal-treated olive-mill wastewater effects on selected parameters of lettuce (Lactuca sativa L.) growth--the role of proline

Olive-mill wastewater (OMW) constitutes a major agricultural waste stream for which disposal is associated with significant environmental repercussions. No data are available on the effects of biotreated OMW and of the protective role of exogenously provided proline on plant physiology. In the present study, OMW was administered, either raw or previously treated by the white-rot fungus Pleurotus ostreatus, with or without proline amendment, to lettuce plants growing in sterilized sand. Biotreated OMW and proline addition resulted in significant moderation of OMW adverse effects on plant biomass production and ascorbic acid content, while their synergistic action alleviated the severe negative impact on net photosynthetic rate, water use efficiency and photosynthetic activity (Fv/Fo) invoked by the effluent. Moreover, biotreated OMW supplemented with proline, moderated the decrease in chlorophylls exerted by raw OMW, but it did not contribute at restoring carotenoids content. Restoration of plant transpiration was complete when biotreated OMW was used (with or without proline); proline alone mitigated the negative impact of OMW on photosynthetic efficiency (Fv/Fm and Fv'/Fm'). It seems that key photosynthetic parameters could be exploited as suitable evaluators of wastewater-induced plant toxicity, while plant fertigation with biotreated and/or supplemented OMW could be an interesting prospect in valorizing this effluent.     

CO2 capture for refineries,a practical approach

This paper evaluates the opportunities and associated costs for post-combustion capture at a world-scale complex refinery. It is concluded that it is technically feasible to apply post-combustion capture at such a refinery. The costs for capture and sequestration from a gasifier are calculated to be lowest at about 30 Euro per ton; this process currently already produces a concentrated CO₂ stream. Next, the CO₂ source most suited for capture appears to be a combined stack, but there are a number of other sources that may be targeted at comparable costs. In total these sources may form about 40% of the overall refinery emissions. Our evaluations show the costs of capture from such sources based on available amine technology will be in the range of 90–120 Euro per ton, which is about 3–4 times higher than the current carbon trading values. The capture of CO₂ from a large amount of smaller CO₂ sources will bring along even much higher costs. A high-level study of the CO₂ emissions profile of a number of Shell refineries shows that, typically, up to 50% of the emitted CO₂ may be captured at similar costs. About 10–20% of concentrated CO₂ associated with hydrogen manufacturing may be captured at lower costs. The remainder of emitted dilute CO₂ will bring along significantly higher costs. Based on this study, it is concluded for the justification of the implementation of post-combustion capture at refineries, either a significant increase in carbon trading values, mandatory regulations, or a major technological break-through is required.     

Effects of low concentration biodiesel blends application on modern passenger cars. Part 3: Impact on PAH, nitro-PAH, and oxy-PAH emissions

This study explores the impact of five different types of methyl esters on polycyclic aromatic hydrocarbon (PAH), nitrated-PAH and oxygenated PAH emissions. The measurements were conducted on a chassis dynamometer, according to the European regulation. Each of the five different biodiesels was blended with EN590 diesel at a proportion of 10-90% v/v (10% biodiesel concentration). The vehicle was a Euro 3 compliant common-rail diesel passenger car. Emission measurements were performed over the NEDC and compared with those of the real traffic-based Artemis driving cycles. The experimental results showed that the addition of biodiesel led to some important increases in low molecular-weight PAHs (phenanthrene and anthracene) and to both increases and reductions in large PAHs which are characterised by their carcinogenic and mutagenic properties. Nitro-PAHs were found to reduce with biodiesel whereas oxy-PAH emissions presented important increases with the biodiesel blends. The impact of biodiesel source material was particularly clear on the formation of PAH compounds. It was found that most PAH emissions decreased as the average load and speed of the driving cycle increased. Cold-start conditions negatively influenced the formation of most PAH compounds. A similar trend was observed with particulate alkane emissions.