Morphological and molecular data suggest a cosmopolitan distribution of the polychaete <Emphasis Type="Italic">Proscoloplos cygnochaetus</Emphasis> Day, 1954 (Annelida,Orbiniidae)

The discovery of a possibly invasive Proscoloplos species on the French Atlantic coast led to a detailed morphological and molecular investigation. Proscoloplos consists of three nominal species, but molecular analyses of the variable ITS1 and ITS2 region revealed no clade support for samples from South Africa, France and Australia, representing at least two of these nominal species. We found no unambiguous diagnostic characters for the three different species even with scanning electron microscopy. Two main characters—first appearance of branchiae and hooks—that were used for species delineation show considerable intrapopulational variation and do not withstand critical evaluation. The obtained data and the observed regenerative capabilities point to a cautious use of the position of branchiae and hooked chaetae as taxonomic marker in Proscoloplos. After experimental bisection of animals, the recovery led to a phenotype without recognizable signs of regeneration, but neither branchiae nor hooked chaetae reoccurred at the same initial segmental position. Summarising the molecular and morphological data we suggest the synonymy of the known Proscoloplos species under the senior synonym Proscoloplos cygnochaetus Day, 1967. The enormous geographic range of this species comprises the temperate waters of the whole southern hemisphere and includes the French population. We discuss a dispersal enabled through the effective anchorage on vessels using mucous glands and chaetae possibly combined with architomic reproduction.     

Overview of a combined computational–experimental evaluation for the assessment of panoramic sunroof impact characteristics for ejection mitigation

Abstract

Objective: To meet increasing customer demand, many vehicle manufacturers are now offering a panoramic sunroof option in their vehicle lineup. Currently, there is no regulatory or consumer test aimed at assessing the potential for ejection mitigation of roof glazing, which leaves manufacturers to develop internal performance standards to guide designs. The goal of this study was to characterize the variety of occupant-to-roof impacts involving unbelted occupants in rollover crashes to determine the ranges of possible effective masses and impact velocities. This information can be used to define occupant retention requirements and performance criteria for roof glazing in occupant ejection protection.

Methods: This study combined computational (MADYMO and LS-Dyna) simulations of occupant kinematics in rollover crashes with laboratory rollover crash tests using the dynamic rollover test system (DRoTS) and linked them through controlled anthropomorphic test device (ATD)-to-roof (“drop”) impact tests. The DRoTS and the ATD drop tests were performed to explore impact scenarios and estimate dummy-to-roof impact impulses. Next, 13 sets of vehicle kinematics and deformation data were extracted from a combination of vehicle dynamics and finite element model simulations that reconstructed variations of rollover crash cases from the field data. Then occupant kinematics data were extracted from a full-factorial sensitivity study that used MADYMO simulations to investigate how changes in anthropometry and seating position would affect occupant–roof impacts across all 13 cases. Finite element (FE) simulations of ATD and Global Human Body Models Consortium (GHBMC) human body model (HBM) roof impacts were performed to investigate the most severe cases from the MADYMO simulations to generate a distribution of head-to-roof impact energies.

Results: From the multiparameter design of experiment and experimental study, kinematics and energy output were extracted and analyzed. Based on dummy-to-roof impact force and dummy-to-roof impact velocity, the most severe rollover scenarios were identified. In the DRoTS experiments followed by the drop tests, the range of identified impact velocities was between 2 and 5.8 m/s. However, computational simulations of the rollover crashes showed higher impact velocities and similar effective masses. The largest dummy-to-roof impact velocity was 11 m/s.

Conclusions: This study combined computational and experimental analyses to determine a range of possible unbelted occupant-to-roof impact energies. These results can be used to determine design parameters for an impactor for the assessment of the risk of roof glazing ejection for unbelted occupants in rollover crashes.     

A Scottish approach to training for the unemployed: work‐start Ltd., Dundee

This article discusses the structure and performance of Work‐Start Ltd., a company located in Dundee and providing training for the unemployed. The company has attracted national and international attention by its innovative approach. Set up to meet the specific problems of peripheral housing estates, it is now responding to rapid changes in the local labour market.     

The prognostic factors in the prenatal diagnosis of the echogenic fetal lung

The prenatal diagnosis of an echogenic fetal lung (EFL) is now often made in the early second trimester using high-resolution ultrasound. This ultrasound appearance is usually caused by a congenital cystic adenomatoid lung malformation (CCAM), an intrapulmonary lung sequestration or obstruction of a major airway. In order to provide prognostic guidelines to parents who may be considering termination of a fetus with these findings, we have analysed a series of 11 cases diagnosed in our centre over the past 2 years in conjunction with 60 cases from major published series. The data suggest that in the absence of non-immune hydrops fetalis (NIHF) or other anomalies, the outcome for the fetuses is excellent, with over 90 per cent survival. Neither early diagnosis (24 weeks) nor the presence of mediastinal shift is a poor prognostic indicator. In addition, it appears that if NIHF is absent at diagnosis, the chance that it will develop as the pregnancy continues is small (6 per cent). Furthermore, there is a significant (up to 30 per cent) chance that this ultrasound finding will resolve in utero. The development of in utero fetal surgical techniques may be the only hope for those hydropic fetuses who appear to have a dismal prognosis.     

The value of patches of intertidal seagrass to prawns depends on their proximity to mangroves

Penaeid prawns were sampled with a small seine net to test whether catches of postlarvae and juveniles in seagrass were affected by the distance of the seagrass (mainly Zostera capricorni) from mangroves and the density of the seagrass in a subtropical marine embayment. Sampling was replicated on the western and eastern sides of Moreton Bay, Queensland, Australia. Information on catches was combined with broad-scale spatial information on the distribution of habitats to estimate the contribution of four different categories of habitat (proximal dense seagrass, distal dense seagrass, proximal sparse seagrass, distal sparse seagrass) to the overall population of small prawns in these regions of Moreton Bay. The abundance of Penaeus plebejus and Metapenaeus bennettae was significantly and consistently greater in dense seagrass proximal to mangroves than in other types of habitat. Additionally, sparse seagrass close to mangroves supported more of these species than dense seagrass farther away, indicating that the role of spatial arrangement of habitats was more important than the effects of structural complexity alone. In contrast, the abundance of P. esculentus tended to be greatest in sparse seagrass distal from mangroves compared with the other habitats. The scaling up of the results from different seagrass types suggests that proximal seagrass beds on both sides of Moreton Bay provide by far the greatest contribution of juvenile M. bennettae and P. plebejus to the overall populations in the Bay.Communicated by M.S. Johnson, Crawley     

Modeling weekday/weekend ozone differences in the Los Angeles region for 1997

Numerous studies of ambient ozone (O3) in the Los Angeles (LA) area have found both increases and decreases in elevated O3 levels on weekends, depending on location and year. Since the mid-1990s, average daily maximum O3 levels have been higher on weekends than on weekdays throughout most of the area. We used the Comprehensive Air-Quality Model with extensions to investigate causes of weekday/weekend O3 differences in the LA area for August 3-7, 1997, from the Southern California Ozone Study. Weekday/weekend emission changes were estimated, because explicit weekend inventories are not yet available from regulatory agencies. Changes to on-road motor vehicle (MV) emissions were derived from observed weekday/weekend traffic differences. The estimated changes in MV emissions of nitrogen oxides (NOx) were a 5% increase on Friday, a 27% decrease on Saturday, and a 37% decrease on Sunday, relative to Monday-Thursday levels. The corresponding changes in MV volatile organic carbon (VOC) emissions were an 8% increase on Friday, an 8% decrease on Saturday, and a 15% decrease on Sunday. Modeling these MV emissions changes explained the observed weekend O3 effect very well. Furthermore, changes to the mass of MV NOx emissions were the main contributor to O3 differences rather than changes to the timing of MV emissions. Ozone increases on weekends were caused by NOx emission decreases, because O3 formation is strongly VOC-limited throughout most of the LA area.     

Laboratory-scale comparison of anaerobic-digestion alternatives.

Laboratory-scale digesters were used to perform side-by-side evaluations of alternative digestion systems including thermophilic-mesophilic-phased digestion (TPAD), acid/methane-phased digestion, mesophilic digestion, and the performance of the thermophilic stage of TPAD alone. Total detention times in the systems evaluated varied from 8 to 20 days. Temperatures in the mesophilic stage of TPAD were varied from 35 to 43.3 degrees C and temperatures in the thermophilic stage were varied from 55 to 58.9 degrees C. The purpose of the study was to evaluate volatile solids (VS) reduction and thickening properties of the different systems. Parameters evaluated included solids, volatile acids, gas production and quality, various chemical constituents of the sludge, and thickening properties using polymer and ferric chloride plus polymer. The TPAD systems were found capable of higher VS destruction at total detention times of 10 and 12.5 days compared to single-stage mesophilic or thermophilic digestion at 15 to 20 days. A laboratory-scale thickening test was performed to evaluate thickening properties. Based on obtaining 95% capture in the test, the polymer demand of mesophilic and acid-methane-phased digestion was the lowest. The TPAD system required approximately 180% of the dosage of the mesophilic sludge and thermophilic sludge required approximately 310% of the dosage. Temperatures of 40.5 and 43.3 degrees C in the mesophilic stage of TPAD were found to increase the polymer requirement and decrease the VS reduction of the TPAD system. Higher temperatures (above 56.1 degrees C) and lower detention times (less than 15 days) in the thermophilic digesters seemed to result in problems with degradation of volatile acids, particularly propionic acid.     

Impact of transverse and longitudinal dispersion on first-order degradation rate constant estimation

A two-dimensional analytical model is employed for estimating the first-order degradation rate constant of hydrophobic organic compounds (HOCs) in contaminated groundwater under steady-state conditions. The model may utilize all aqueous concentration data collected downgradient of a source area, but does not require that any data be collected along the plume centerline. Using a least squares fit of the model to aqueous concentrations measured in monitoring wells, degradation rate constants were estimated at a former manufactured gas plant (FMGP) site in the Midwest U.S. The estimated degradation rate constants are 0.0014, 0.0034, 0.0031, 0.0019, and 0.0053 day(-1) for acenaphthene, naphthalene, benzene, ethylbenzene, and toluene, respectively. These estimated rate constants were as low as one-half those estimated with the one-dimensional (centerline) approach of Buscheck and Alcantar [Buscheck, T.E., Alcantar, C.M., 1995. Regression techniques and analytical solutions to demonstrate intrinsic bioremediation. In: Hinchee, R.E., Wilson, J.T., Downey, D.C. (Eds.), Intrinsic Bioremediation, Battelle Press, Columbus, OH, pp. 109-116] which does not account for transverse dispersivity. Varying the transverse and longitudinal dispersivity values over one order of magnitude for toluene data obtained from the FMGP site resulted in nearly a threefold variation in the estimated degradation rate constant-highlighting the importance of reliable estimates of the dispersion coefficients for obtaining reasonable estimates of the degradation rate constants. These results have significant implications for decision making and site management where overestimation of a degradation rate may result in remediation times and bioconversion factors that exceed expectations. For a complex source area or non-steady-state plume, a superposition of analytical models that incorporate longitudinal and transverse dispersion and time may be used at sites where the centerline method would not be applicable.     

Assessment of intrinsic bioremediation of a coal-tar-affected aquifer using Two-dimensional reactive transport and Biogeochemical mass balance approaches.

Expedited site characterization and groundwater monitoring using direct-push technology and conventional monitoring wells were conducted at a former manufactured gas plant site. Biogeochemical data and heterotrophic plate counts support the presence of microbially mediated remediation. By superimposing solutions of a two-dimensional reactive transport analytical model, first-order degradation rate coefficients ((day-1) ) of various compounds for the dissolved-phase plume were estimated (i.e., benzene [0.0084], naphthalene [0.0058], and acenaphthene [0.0011]). The total mass transformed by aerobic respiration, nitrate reduction, and sulfate reduction around the free-phase coal-tar dense-nonaqueous-phase-liquid region and in the plume was estimated to be approximately 4.5 kg/y using a biogeochemical mass-balance approach. The total mass transformed using the degradation rate coefficients was estimated to be approximately 3.6 kg/y. Results showed that a simple two-dimensional analytical model and a biochemical mass balance with geochemical data from expedited site characterization can be useful for rapid estimation of mass-transformation rates.